cable fairleads

[Dave Qualley]

The only fairleads I was provided with my kit require that an angle be mounted
at
each location since they mount 90 degrees to the cable. I would much rather
have the fairlead mount right on the same surface as the hole and the
plastic rings are easy.

I had the same problem.. Then I noticed that Murphy had taken these same
fairleads on the factory plane, and drilled a new hole perpendicular to the
original center hole.. Seems a little odd, but it works..

Dave
#057SR




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Mike Kimball]

You're kidding! Well, if it works...

Thanks,

Mike

P.S. Man, you must be a night owl or working a night shift like I am. It's
midnight now here in Fairbanks and everywhere else in Canada and the US is
later. I just got your response to the problem drilling large holes too.
Thanks.

-----Original Message-----
From: murphy-rebel@dcsol.com [mailto:murphy-rebel@dcsol.com]On Behalf Of
Dave Qualley
Sent: Friday, January 04, 2002 11:44 PM
To: murphy-rebel@dcsol.com
Subject: Re: cable fairleads

The only fairleads I was provided with my kit require that an angle be

mounted

at
each location since they mount 90 degrees to the cable. I would much

rather

have the fairlead mount right on the same surface as the hole and the
plastic rings are easy.

I had the same problem.. Then I noticed that Murphy had taken these same
fairleads on the factory plane, and drilled a new hole perpendicular to the
original center hole.. Seems a little odd, but it works..

Dave
#057SR


** To unsubscribe, send e-mail to list-server@dcsol.com with **
** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself **
** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm **
** To contact the list admin, e-mail mike.davis@dcsol.com **




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------