Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
[rebel-builders] carburator bits
[rebel-builders] carburator bits
Garry, this is probably not your problem, but thought I would mention a situation I had once with my 320 carb. It is possible to install the bowl and have the mixture cut off out of position. I did that a long time when doing some troubleshooting, with the result being unable to properly shut off the fuel at the carb. Solution was simply to reinstall the bowl taking care to make sure the mixture goes into the right hole.
Walter
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: Garry Wright <wright.garry30@gmail.com>
Date: Fri, 04 Jun 2010 10:39:29
To: <rebel-builders@dcsol.com>
Subject: [rebel-builders] carburator bits
I've got a Marvel-Schebler MA-4SPA part# 10-3678-12 on my O-320. I'm
having a bit of trouble with idle cutoff and it seems to be leak-by
associated with the mixture barrel/window-sleeve/window components. I
can't find the part numbers on this part - anyone know how to find same?
Reference EAA article by Richard Koehler "It Won't Shut Down".
Garry
C-FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Walter
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: Garry Wright <wright.garry30@gmail.com>
Date: Fri, 04 Jun 2010 10:39:29
To: <rebel-builders@dcsol.com>
Subject: [rebel-builders] carburator bits
I've got a Marvel-Schebler MA-4SPA part# 10-3678-12 on my O-320. I'm
having a bit of trouble with idle cutoff and it seems to be leak-by
associated with the mixture barrel/window-sleeve/window components. I
can't find the part numbers on this part - anyone know how to find same?
Reference EAA article by Richard Koehler "It Won't Shut Down".
Garry
C-FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] carburator bits
Interesting but weird. Bowl was not removed since I got it and mixture wrkd correctly so tt's likely not it. Tnx anyway.
G
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: walter.klatt@shaw.ca
Date: Fri, 4 Jun 2010 17:11:54
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] carburator bits
Garry, this is probably not your problem, but thought I would mention a situation I had once with my 320 carb. It is possible to install the bowl and have the mixture cut off out of position. I did that a long time when doing some troubleshooting, with the result being unable to properly shut off the fuel at the carb. Solution was simply to reinstall the bowl taking care to make sure the mixture goes into the right hole.
Walter
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: Garry Wright <wright.garry30@gmail.com>
Date: Fri, 04 Jun 2010 10:39:29
To: <rebel-builders@dcsol.com>
Subject: [rebel-builders] carburator bits
I've got a Marvel-Schebler MA-4SPA part# 10-3678-12 on my O-320. I'm
having a bit of trouble with idle cutoff and it seems to be leak-by
associated with the mixture barrel/window-sleeve/window components. I
can't find the part numbers on this part - anyone know how to find same?
Reference EAA article by Richard Koehler "It Won't Shut Down".
Garry
C-FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
G
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: walter.klatt@shaw.ca
Date: Fri, 4 Jun 2010 17:11:54
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] carburator bits
Garry, this is probably not your problem, but thought I would mention a situation I had once with my 320 carb. It is possible to install the bowl and have the mixture cut off out of position. I did that a long time when doing some troubleshooting, with the result being unable to properly shut off the fuel at the carb. Solution was simply to reinstall the bowl taking care to make sure the mixture goes into the right hole.
Walter
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: Garry Wright <wright.garry30@gmail.com>
Date: Fri, 04 Jun 2010 10:39:29
To: <rebel-builders@dcsol.com>
Subject: [rebel-builders] carburator bits
I've got a Marvel-Schebler MA-4SPA part# 10-3678-12 on my O-320. I'm
having a bit of trouble with idle cutoff and it seems to be leak-by
associated with the mixture barrel/window-sleeve/window components. I
can't find the part numbers on this part - anyone know how to find same?
Reference EAA article by Richard Koehler "It Won't Shut Down".
Garry
C-FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] carburator bits
Have you checked to see if your primer check valve is seated? It will
continue to run but rough after shutdown if leaking
Charlie E..
----- Original Message -----
From: "Garry Wright" <wright.garry30@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, June 04, 2010 11:39 AM
Subject: [rebel-builders] carburator bits
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
continue to run but rough after shutdown if leaking
Charlie E..
----- Original Message -----
From: "Garry Wright" <wright.garry30@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, June 04, 2010 11:39 AM
Subject: [rebel-builders] carburator bits
I've got a Marvel-Schebler MA-4SPA part# 10-3678-12 on my O-320. I'm
having a bit of trouble with idle cutoff and it seems to be leak-by
associated with the mixture barrel/window-sleeve/window components. I
can't find the part numbers on this part - anyone know how to find same?
Reference EAA article by Richard Koehler "It Won't Shut Down".
Garry
C-FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] carburator bits
Or if there is some dirt in there not allowing it to seat properly. I had that problem once, too. It was actually Wayne here on this list that correctly diagnosed that one. My symptoms had to do with a rough running engine, though, not a problem shutting down.
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: Charlie Eubanks <charlie@troyairpark.com>
Date: Fri, 04 Jun 2010 17:05:02
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] carburator bits
Have you checked to see if your primer check valve is seated? It will
continue to run but rough after shutdown if leaking
Charlie E..
----- Original Message -----
From: "Garry Wright" <wright.garry30@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, June 04, 2010 11:39 AM
Subject: [rebel-builders] carburator bits
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Sent on the TELUS Mobility network with BlackBerry
-----Original Message-----
From: Charlie Eubanks <charlie@troyairpark.com>
Date: Fri, 04 Jun 2010 17:05:02
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] carburator bits
Have you checked to see if your primer check valve is seated? It will
continue to run but rough after shutdown if leaking
Charlie E..
----- Original Message -----
From: "Garry Wright" <wright.garry30@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, June 04, 2010 11:39 AM
Subject: [rebel-builders] carburator bits
I've got a Marvel-Schebler MA-4SPA part# 10-3678-12 on my O-320. I'm
having a bit of trouble with idle cutoff and it seems to be leak-by
associated with the mixture barrel/window-sleeve/window components. I
can't find the part numbers on this part - anyone know how to find same?
Reference EAA article by Richard Koehler "It Won't Shut Down".
Garry
C-FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] carburator bits
Gary,
The part # for the MA4SPA 10-3678-12 Mixture control metering valve assy. is
242-514 hope this helps.
Si
----- Original Message -----
From: "Garry Wright" <wright.garry30@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, June 04, 2010 11:39 AM
Subject: [rebel-builders] carburator bits
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2917 - Release Date: 06/04/10
06:25:00
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
The part # for the MA4SPA 10-3678-12 Mixture control metering valve assy. is
242-514 hope this helps.
Si
----- Original Message -----
From: "Garry Wright" <wright.garry30@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, June 04, 2010 11:39 AM
Subject: [rebel-builders] carburator bits
--------------------------------------------------------------------------------I've got a Marvel-Schebler MA-4SPA part# 10-3678-12 on my O-320. I'm
having a bit of trouble with idle cutoff and it seems to be leak-by
associated with the mixture barrel/window-sleeve/window components. I
can't find the part numbers on this part - anyone know how to find same?
Reference EAA article by Richard Koehler "It Won't Shut Down".
Garry
C-FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2917 - Release Date: 06/04/10
06:25:00
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] carburator bits
Thanks Si. That could help a lot. Where did you find that and who is a
good supplier?
Garry
On 10-06-04 06:40 PM, Simon Smith wrote:
Garry Wright
Skepticism is the highest duty and blind faith the one unpardonable sin.
-- Thomas Huxley, (attributed: source unknown)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
good supplier?
Garry
On 10-06-04 06:40 PM, Simon Smith wrote:
--Gary,
The part # for the MA4SPA 10-3678-12 Mixture control metering valve assy. is
242-514 hope this helps.
Si
----- Original Message -----
From: "Garry Wright"<wright.garry30@gmail.com>
To:<rebel-builders@dcsol.com>
Sent: Friday, June 04, 2010 11:39 AM
Subject: [rebel-builders] carburator bits
--------------------------------------------------------------------------------I've got a Marvel-Schebler MA-4SPA part# 10-3678-12 on my O-320. I'm
having a bit of trouble with idle cutoff and it seems to be leak-by
associated with the mixture barrel/window-sleeve/window components. I
can't find the part numbers on this part - anyone know how to find same?
Reference EAA article by Richard Koehler "It Won't Shut Down".
Garry
C-FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2917 - Release Date: 06/04/10
06:25:00
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Garry Wright
Skepticism is the highest duty and blind faith the one unpardonable sin.
-- Thomas Huxley, (attributed: source unknown)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] carburator bits
Thanks Charlie. If I don't get anywhere with the thread I'm following I
will chase that one. The article below suggests that would cause plug
fouling and other problems before this cutoff issue so I'll keep it in mind.
Garry
On 10-06-04 04:05 PM, Charlie Eubanks wrote:
Garry Wright
Skepticism is the highest duty and blind faith the one unpardonable sin.
-- Thomas Huxley, (attributed: source unknown)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
will chase that one. The article below suggests that would cause plug
fouling and other problems before this cutoff issue so I'll keep it in mind.
Garry
On 10-06-04 04:05 PM, Charlie Eubanks wrote:
--Have you checked to see if your primer check valve is seated? It will
continue to run but rough after shutdown if leaking
Charlie E..
----- Original Message -----
From: "Garry Wright"<wright.garry30@gmail.com>
To:<rebel-builders@dcsol.com>
Sent: Friday, June 04, 2010 11:39 AM
Subject: [rebel-builders] carburator bits
I've got a Marvel-Schebler MA-4SPA part# 10-3678-12 on my O-320. I'm
having a bit of trouble with idle cutoff and it seems to be leak-by
associated with the mixture barrel/window-sleeve/window components. I
can't find the part numbers on this part - anyone know how to find same?
Reference EAA article by Richard Koehler "It Won't Shut Down".
Garry
C-FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Garry Wright
Skepticism is the highest duty and blind faith the one unpardonable sin.
-- Thomas Huxley, (attributed: source unknown)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] carburator bits
Gary,
The information came from my Precision Carburetors Manual. I don't know of a
source right now but you might try A.E.R.O. 1-800-362-3044 or El Reno
Aviation 405-262-2387.
Si
----- Original Message -----
From: "Garry Wright" <wright.garry30@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, June 05, 2010 6:39 AM
Subject: Re: [rebel-builders] carburator bits
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2918 - Release Date: 06/04/10
18:25:00
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
The information came from my Precision Carburetors Manual. I don't know of a
source right now but you might try A.E.R.O. 1-800-362-3044 or El Reno
Aviation 405-262-2387.
Si
----- Original Message -----
From: "Garry Wright" <wright.garry30@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, June 05, 2010 6:39 AM
Subject: Re: [rebel-builders] carburator bits
--------------------------------------------------------------------------------Thanks Si. That could help a lot. Where did you find that and who is a
good supplier?
Garry
On 10-06-04 06:40 PM, Simon Smith wrote:--Gary,
The part # for the MA4SPA 10-3678-12 Mixture control metering valve assy.
is
242-514 hope this helps.
Si
----- Original Message -----
From: "Garry Wright"<wright.garry30@gmail.com>
To:<rebel-builders@dcsol.com>
Sent: Friday, June 04, 2010 11:39 AM
Subject: [rebel-builders] carburator bits
--------------------------------------------------------------------------------I've got a Marvel-Schebler MA-4SPA part# 10-3678-12 on my O-320. I'm
having a bit of trouble with idle cutoff and it seems to be leak-by
associated with the mixture barrel/window-sleeve/window components. I
can't find the part numbers on this part - anyone know how to find same?
Reference EAA article by Richard Koehler "It Won't Shut Down".
Garry
C-FOKM
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2917 - Release Date: 06/04/10
06:25:00
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Garry Wright
Skepticism is the highest duty and blind faith the one unpardonable sin.
-- Thomas Huxley, (attributed: source unknown)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2918 - Release Date: 06/04/10
18:25:00
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] carburator bits
Thanks Si. Thats very helpful. This is not a normally replaced part and
does not appear in any of the lists I've found.
Garry
On 10-06-05 06:51 AM, Simon Smith wrote:
Garry Wright
Skepticism is the highest duty and blind faith the one unpardonable sin.
-- Thomas Huxley, (attributed: source unknown)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
does not appear in any of the lists I've found.
Garry
On 10-06-05 06:51 AM, Simon Smith wrote:
--Gary,
The information came from my Precision Carburetors Manual. I don't know of a
source right now but you might try A.E.R.O. 1-800-362-3044 or El Reno
Aviation 405-262-2387.
Si
----- Original Message -----
From: "Garry Wright"<wright.garry30@gmail.com>
To:<rebel-builders@dcsol.com>
Sent: Saturday, June 05, 2010 6:39 AM
Subject: Re: [rebel-builders] carburator bits
--------------------------------------------------------------------------------Thanks Si. That could help a lot. Where did you find that and who is a
good supplier?
Garry
On 10-06-04 06:40 PM, Simon Smith wrote:
--Gary,
The part # for the MA4SPA 10-3678-12 Mixture control metering valve assy.
is
242-514 hope this helps.
Si
----- Original Message -----
From: "Garry Wright"<wright.garry30@gmail.com>
To:<rebel-builders@dcsol.com>
Sent: Friday, June 04, 2010 11:39 AM
Subject: [rebel-builders] carburator bits
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2917 - Release Date: 06/04/10
06:25:00
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Garry Wright
Skepticism is the highest duty and blind faith the one unpardonable sin.
-- Thomas Huxley, (attributed: source unknown)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2918 - Release Date: 06/04/10
18:25:00
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Garry Wright
Skepticism is the highest duty and blind faith the one unpardonable sin.
-- Thomas Huxley, (attributed: source unknown)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] carburator bits
I take that back. ACS has it for $79.85 but no info on it at all so I
was initially unable to find it.
G
On 10-06-05 06:51 AM, Simon Smith wrote:
Garry Wright
Skepticism is the highest duty and blind faith the one unpardonable sin.
-- Thomas Huxley, (attributed: source unknown)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
was initially unable to find it.
G
On 10-06-05 06:51 AM, Simon Smith wrote:
--Gary,
The information came from my Precision Carburetors Manual. I don't know of a
source right now but you might try A.E.R.O. 1-800-362-3044 or El Reno
Aviation 405-262-2387.
Si
----- Original Message -----
From: "Garry Wright"<wright.garry30@gmail.com>
To:<rebel-builders@dcsol.com>
Sent: Saturday, June 05, 2010 6:39 AM
Subject: Re: [rebel-builders] carburator bits
--------------------------------------------------------------------------------Thanks Si. That could help a lot. Where did you find that and who is a
good supplier?
Garry
On 10-06-04 06:40 PM, Simon Smith wrote:
--Gary,
The part # for the MA4SPA 10-3678-12 Mixture control metering valve assy.
is
242-514 hope this helps.
Si
----- Original Message -----
From: "Garry Wright"<wright.garry30@gmail.com>
To:<rebel-builders@dcsol.com>
Sent: Friday, June 04, 2010 11:39 AM
Subject: [rebel-builders] carburator bits
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2917 - Release Date: 06/04/10
06:25:00
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Garry Wright
Skepticism is the highest duty and blind faith the one unpardonable sin.
-- Thomas Huxley, (attributed: source unknown)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2918 - Release Date: 06/04/10
18:25:00
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Garry Wright
Skepticism is the highest duty and blind faith the one unpardonable sin.
-- Thomas Huxley, (attributed: source unknown)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------