Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] SR Part/FUS387??

Converted from Wildcat! database. (read only)
Locked
Ted Waltman

[rebel-builders] SR Part/FUS387??

Post by Ted Waltman » Sun Feb 19, 2012 5:40 pm

Thought about making one? Find some thin raw stock (e.g. 0.020). Make a
wooden form using a belt sander. Bend/hammer 0.020 over the wooden form.
Cut small relief slots to enable smooth bend or use fluting pliers
(http://www.aircraftspruce.com/catalog/t ... pliers.php ). Faster than
waiting on Murphy to get you one <sigh>.

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Cindy
and Brooks
Sent: Tuesday, October 13, 2009 6:42 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] SR Part/FUS387??

Hello all,
Can you tell me if anybody out there has one FUS387 corner gusset? Mis
drilled (oops). Called Murphy, so no response. Please respond if you know of
where I can get one.
Thanks,
Brooks Parton
SR2500 N166BP



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
craig

[rebel-builders] SR Part/FUS387??

Post by craig » Sun Feb 19, 2012 5:40 pm

Ted,

Do you think that method would work for a windshield? lol I may get
desperate enough to try and form the stuff that came with my kit.




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Jeff Micheal

[rebel-builders] SR Part/FUS387??

Post by Jeff Micheal » Sun Feb 19, 2012 5:40 pm

Craig....... Did you get a call back on your windshield ??

Jeff


On Tue, Oct 13, 2009 at 8:56 PM, craig <snowyrvr@mtaonline.net> wrote:
Ted,

Do you think that method would work for a windshield? lol I may get
desperate enough to try and form the stuff that came with my kit.




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
craig

[rebel-builders] SR Part/FUS387??

Post by craig » Sun Feb 19, 2012 5:40 pm

Not yet. I left a message as well. CW



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Ken

[rebel-builders] SR Part/FUS387??

Post by Ken » Sun Feb 19, 2012 5:40 pm

Any chance a Fus-387 is the same as a Rebel Fus-37 quarter round gusset?
Fus-37 is cut into 4 quarter round gussets that make up the curves in
the fuselage around the door opening. I have one or more of those
quarter rounds but they don't seem to have a separate part number once
you cut the Fus-37 in my manual.
Ken

Ted Waltman wrote:
Thought about making one? Find some thin raw stock (e.g. 0.020). Make a
wooden form using a belt sander. Bend/hammer 0.020 over the wooden form.
Cut small relief slots to enable smooth bend or use fluting pliers
(http://www.aircraftspruce.com/catalog/t ... pliers.php ). Faster than
waiting on Murphy to get you one <sigh>.

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Cindy
and Brooks
Sent: Tuesday, October 13, 2009 6:42 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] SR Part/FUS387??

Hello all,
Can you tell me if anybody out there has one FUS387 corner gusset? Mis
drilled (oops). Called Murphy, so no response. Please respond if you know of
where I can get one.
Thanks,
Brooks Parton
SR2500 N166BP

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Jeff Micheal

[rebel-builders] SR Part/FUS387??

Post by Jeff Micheal » Sun Feb 19, 2012 5:40 pm

Ken,

Fus0037 is for the Rebel and Elite doors, but will also fit the Cargo Door
for the SR Series. Fus0387 is for the main doors for the SR Series.

Cheers,
Jeff


On Wed, Oct 14, 2009 at 6:09 AM, Ken <klehman@albedo.net> wrote:
Any chance a Fus-387 is the same as a Rebel Fus-37 quarter round gusset?
Fus-37 is cut into 4 quarter round gussets that make up the curves in
the fuselage around the door opening. I have one or more of those
quarter rounds but they don't seem to have a separate part number once
you cut the Fus-37 in my manual.
Ken

Ted Waltman wrote:
Thought about making one? Find some thin raw stock (e.g. 0.020). Make a
wooden form using a belt sander. Bend/hammer 0.020 over the wooden form.
Cut small relief slots to enable smooth bend or use fluting pliers
(http://www.aircraftspruce.com/catalog/t ... pliers.php ). Faster
than
waiting on Murphy to get you one <sigh>.

Ted

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Cindy
and Brooks
Sent: Tuesday, October 13, 2009 6:42 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] SR Part/FUS387??

Hello all,
Can you tell me if anybody out there has one FUS387 corner gusset? Mis
drilled (oops). Called Murphy, so no response. Please respond if you know
of
where I can get one.
Thanks,
Brooks Parton
SR2500 N166BP

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”