Thought about making one? Find some thin raw stock (e.g. 0.020). Make a
wooden form using a belt sander. Bend/hammer 0.020 over the wooden form.
Cut small relief slots to enable smooth bend or use fluting pliers
(http://www.aircraftspruce.com/catalog/t ... pliers.php ). Faster than
waiting on Murphy to get you one <sigh>.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Cindy
and Brooks
Sent: Tuesday, October 13, 2009 6:42 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] SR Part/FUS387??
Hello all,
Can you tell me if anybody out there has one FUS387 corner gusset? Mis
drilled (oops). Called Murphy, so no response. Please respond if you know of
where I can get one.
Thanks,
Brooks Parton
SR2500 N166BP
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
[rebel-builders] SR Part/FUS387??
[rebel-builders] SR Part/FUS387??
Ted,
Do you think that method would work for a windshield? lol I may get
desperate enough to try and form the stuff that came with my kit.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you think that method would work for a windshield? lol I may get
desperate enough to try and form the stuff that came with my kit.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] SR Part/FUS387??
Craig....... Did you get a call back on your windshield ??
Jeff
On Tue, Oct 13, 2009 at 8:56 PM, craig <snowyrvr@mtaonline.net> wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Jeff
On Tue, Oct 13, 2009 at 8:56 PM, craig <snowyrvr@mtaonline.net> wrote:
Ted,
Do you think that method would work for a windshield? lol I may get
desperate enough to try and form the stuff that came with my kit.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] SR Part/FUS387??
Not yet. I left a message as well. CW
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] SR Part/FUS387??
Any chance a Fus-387 is the same as a Rebel Fus-37 quarter round gusset?
Fus-37 is cut into 4 quarter round gussets that make up the curves in
the fuselage around the door opening. I have one or more of those
quarter rounds but they don't seem to have a separate part number once
you cut the Fus-37 in my manual.
Ken
Ted Waltman wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Fus-37 is cut into 4 quarter round gussets that make up the curves in
the fuselage around the door opening. I have one or more of those
quarter rounds but they don't seem to have a separate part number once
you cut the Fus-37 in my manual.
Ken
Ted Waltman wrote:
Thought about making one? Find some thin raw stock (e.g. 0.020). Make a
wooden form using a belt sander. Bend/hammer 0.020 over the wooden form.
Cut small relief slots to enable smooth bend or use fluting pliers
(http://www.aircraftspruce.com/catalog/t ... pliers.php ). Faster than
waiting on Murphy to get you one <sigh>.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Cindy
and Brooks
Sent: Tuesday, October 13, 2009 6:42 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] SR Part/FUS387??
Hello all,
Can you tell me if anybody out there has one FUS387 corner gusset? Mis
drilled (oops). Called Murphy, so no response. Please respond if you know of
where I can get one.
Thanks,
Brooks Parton
SR2500 N166BP
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] SR Part/FUS387??
Ken,
Fus0037 is for the Rebel and Elite doors, but will also fit the Cargo Door
for the SR Series. Fus0387 is for the main doors for the SR Series.
Cheers,
Jeff
On Wed, Oct 14, 2009 at 6:09 AM, Ken <klehman@albedo.net> wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Fus0037 is for the Rebel and Elite doors, but will also fit the Cargo Door
for the SR Series. Fus0387 is for the main doors for the SR Series.
Cheers,
Jeff
On Wed, Oct 14, 2009 at 6:09 AM, Ken <klehman@albedo.net> wrote:
Any chance a Fus-387 is the same as a Rebel Fus-37 quarter round gusset?
Fus-37 is cut into 4 quarter round gussets that make up the curves in
the fuselage around the door opening. I have one or more of those
quarter rounds but they don't seem to have a separate part number once
you cut the Fus-37 in my manual.
Ken
Ted Waltman wrote:thanThought about making one? Find some thin raw stock (e.g. 0.020). Make a
wooden form using a belt sander. Bend/hammer 0.020 over the wooden form.
Cut small relief slots to enable smooth bend or use fluting pliers
(http://www.aircraftspruce.com/catalog/t ... pliers.php ). FasterCindywaiting on Murphy to get you one <sigh>.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Ofofand Brooks
Sent: Tuesday, October 13, 2009 6:42 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] SR Part/FUS387??
Hello all,
Can you tell me if anybody out there has one FUS387 corner gusset? Mis
drilled (oops). Called Murphy, so no response. Please respond if you knowwhere I can get one.
Thanks,
Brooks Parton
SR2500 N166BP
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------