[rebel-builders] moose fastbuild fus-33

[Dale Fultz]

Yes Jason that is where they are for ... It is in the fuselage section...
Dale SR-033
----- Original Message -----
From




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Robert and Olga Johnson]

Hi Jason. I believe there is a typo in the manual and they refer to fus
380's (inside corners) which go on the floor area of the baggage compartment
section. Mine are also marked fus 33. I do not see anywhere else in the
manual where these would be used. see page 5, fig 9 dated 13/03/2002. Bob J
( working on QB 226)
----- Original Message -----
From: "Jason Beall" <super_rebel131@yahoo.com>
To: "new list server" <rebel-builders@dcsol.com>
Sent: Thursday, May 18, 2006 3:24 PM
Subject: [rebel-builders] moose fastbuild fus-33

Evening all,

On the Moose/SuperRebel fastbuild, what are the
FUS-33's for? I have three of these, they are curved
sheets of aluminium.

I suspect they are for the inside of the fuselage
above the rear windows/baggage door? I can't find
where they are referenced in the builders manual?

Any help would be appreciated.

Thanks, -Jason


__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Drew Dalgleish]

Hi Bob How many planes are you building anyway :)

At 07:03 PM 5/18/2006 -0400, you wrote:

Hi Jason. I believe there is a typo in the manual and they refer to fus
380's (inside corners) which go on the floor area of the baggage compartment
section. Mine are also marked fus 33. I do not see anywhere else in the
manual where these would be used. see page 5, fig 9 dated 13/03/2002. Bob J
( working on QB 226)
----- Original Message -----
From: "Jason Beall" <super_rebel131@yahoo.com>
To: "new list server" <rebel-builders@dcsol.com>
Sent: Thursday, May 18, 2006 3:24 PM
Subject: [rebel-builders] moose fastbuild fus-33

Evening all,

On the Moose/SuperRebel fastbuild, what are the
FUS-33's for? I have three of these, they are curved
sheets of aluminium.

I suspect they are for the inside of the fuselage
above the rear windows/baggage door? I can't find
where they are referenced in the builders manual?

Any help would be appreciated.

Thanks, -Jason


__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Dale Fultz]

Jason they go in Section 9.3 Fuselage Assembly Page 12 Step 70 it is an
omission in the MAM manual.. They go into the top corners to finish
them...I can give you instructions on them if you need.... The FUS-380
mentioned by someone else go into the bottom corners in cargo area they have
a square type bend on them not rounded like the correct markings of FUS-33
which is correct for the part you are referring to... They aren't mention in
the MANUAL but I will guarantee you this is where they go... Dale SR-033
-----




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Robert and Olga Johnson]

Hi Drew: Right now just a Moose quick build for another gentleman. ( I just
wish it was mine.) I did build and fly Rebel 652 for 3 years - sold it (
really stupid - I miss it terribly) , Built another Rebel for someone else
and also built a Challenger for me at that time, currently flying that - but
it aint no Rebel ( wana buy it). I would like to build myself another Rebel,
but later - after I sell the Challenger. Oh yeh, I started with a Zenair
701 - That was a lot of fun if you did not want to go anywhere in a wind.
That's all for now, but I do have to admit, I enjoy the building as much as
the flying. - Keep at it as you know - It really is worth it. - Bob
----- Original Message -----
From: "Drew Dalgleish" <drewjan@cabletv.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, May 18, 2006 8:29 PM
Subject: Re: [rebel-builders] moose fastbuild fus-33

Hi Bob How many planes are you building anyway :)

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Robert and Olga Johnson]

Thanks Dale - My manual makes no indication of inside corners at the top and
I am missing the Fus 380 parts. I guess that is why I assumed (the famous
word) the 33's went on the bottom. - Sorry for misinforming. Boy - I wonder
what other surprises I will find. Bob J
----- Original Message -----
From: "Dale Fultz" <dfultz17086@earthlink.net>
To: <rebel-builders@dcsol.com>
Sent: Thursday, May 18, 2006 9:06 PM
Subject: Re: [rebel-builders] moose fastbuild fus-33

Jason they go in Section 9.3 Fuselage Assembly Page 12 Step 70 it is an
omission in the MAM manual.. They go into the top corners to finish
them...I can give you instructions on them if you need.... The FUS-380
mentioned by someone else go into the bottom corners in cargo area they
have
a square type bend on them not rounded like the correct markings of FUS-33
which is correct for the part you are referring to... They aren't mention
in
the MANUAL but I will guarantee you this is where they go... Dale SR-033
-----




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Dale Fultz]

Not a problem Bob,,, I could probably write the manual without it as many
times as I have read through it trying to figure things out.. And I kinda
chucked it when I changed the moose to a trigear instead of a taildragger.
The manual is good as a guide line but is hard to follow sometimes... I have
talked to several people that were missing the 380 including myself so it
would have been easy for you to mistake the 33 for them except the sharp
bend on the 380 when you see them is a give away for them.. Dale SR-033
----- Original Message -----
From: "Robert and Olga Johnson"




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jason Beall]

Thanks Dale.

-Jason

--- Dale Fultz <dfultz17086@earthlink.net> wrote:

Jason they go in Section 9.3 Fuselage Assembly Page
12 Step 70 it is an
omission in the MAM manual.. They go into the top
corners to finish
them...I can give you instructions on them if you
need.... The FUS-380
mentioned by someone else go into the bottom corners
in cargo area they have
a square type bend on them not rounded like the
correct markings of FUS-33
which is correct for the part you are referring
to... They aren't mention in
the MANUAL but I will guarantee you this is where
they go... Dale SR-033
-----

-----------------------------------------------------------------

List archives located at:
https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------


________________________________________________

Jason Beall
Super Rebel No. 131
Aberdeen, Scotland, UK
super_rebel131@yahoo.com

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------