Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

f89 fuselage pieces

Converted from Wildcat! database. (read only)
Locked
Wayne Ouellette

f89 fuselage pieces

Post by Wayne Ouellette » Sat Feb 18, 2012 10:09 am

Hi everybody, I bought an early rebel kit and it doesn't have the F89
doublers that lie inside the tailcone. They join the side skins to the
Fus 30 tail wrap. Does anybody know the thickness of those pieces so I
can fabricate them myself.
Thanks
Wayne 333R



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Ken

f89 fuselage pieces

Post by Ken » Sat Feb 18, 2012 10:09 am

I believe they are 0.020
I think that upgrade was designed when FUS-30 was only 0.020
Sometimes the aft end of the flanges on it have to be trimmed a bit to
clear the elevator push rods so you might want to taper the flanges down
to perhaps 1/4" at the aft end.
Ken 119R

Wayne Ouellette wrote:
Hi everybody, I bought an early rebel kit and it doesn't have the F89
doublers that lie inside the tailcone. They join the side skins to the
Fus 30 tail wrap. Does anybody know the thickness of those pieces so I
can fabricate them myself.
Thanks
Wayne 333R



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Wayne Ouellette

f89 fuselage pieces

Post by Wayne Ouellette » Sat Feb 18, 2012 10:09 am

Thanks very much Ken, I can keep going now!
----- Original Message -----
From: "Ken" <klehman@albedo.net>
To: <rebel-builders@dcsol.com>
Sent: Friday, February 04, 2005 10:48 AM
Subject: Re: f89 fuselage pieces

I believe they are 0.020
I think that upgrade was designed when FUS-30 was only 0.020
Sometimes the aft end of the flanges on it have to be trimmed a bit to
clear the elevator push rods so you might want to taper the flanges down
to perhaps 1/4" at the aft end.
Ken 119R

Wayne Ouellette wrote:
Hi everybody, I bought an early rebel kit and it doesn't have the F89
doublers that lie inside the tailcone. They join the side skins to the
Fus 30 tail wrap. Does anybody know the thickness of those pieces so I
can fabricate them myself.
Thanks
Wayne 333R



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
brad

f89 fuselage pieces

Post by brad » Sat Feb 18, 2012 10:09 am

Wayne,

I had the same problem. I don't know the guage but it is a formed part.
It seems to me that they wern't too expensive from MAM.

Brad R195





On 2/4/2005 5:23 AM, W.OUELLETTE@SYMPATICO.CA wrote to REBEL-BUILDERS:

-> Received: by dcsol.com (Wildcat! SMTP Router v6.0.451.3)
-> for rebel-builders@dcsol.com; Fri, 04 Feb 2005 05:24:36 -0900
-> Received: from tomts5.bellnexxia.net ([209.226.175.25]) EHLO=tomts5-
srv.bellnexxia.net
-> by dcsol.com (Wildcat! SMTP v6.0.451.3) with SMTP
-> id 383032343; Fri, 04 Feb 2005 05:24:34 -0900
-> Received: from useraobwrjfvto ([206.172.171.168])
-> by tomts5-srv.bellnexxia.net
-> (InterMail vM.5.01.06.10 201-253-122-130-110-20040306) with SMTP
-> id <20050204142431.HUXQ2026.tomts5-
srv.bellnexxia.net@useraobwrjfvto>
-> for <rebel-builders@dcsol.com>; Fri, 4 Feb 2005 09:24:31 -0500
-> Message-ID: <001501c50ac5$18043090$a8abacce@useraobwrjfvto>
-> From: "Wayne Ouellette" <w.ouellette@sympatico.ca>
-> To: <rebel-builders@dcsol.com>
-> Subject: f89 fuselage pieces
-> Date: Fri, 4 Feb 2005 09:23:26 -0500
-> X-Orig-MIME-Version: 1.0
-> X-Orig-Content-Type: multipart/alternative; boundary="----
=_NextPart_000_0012_01C50A9B.2E3CC3B0"
-> X-Priority: 3
-> X-MSMail-Priority: Normal
-> X-Mailer: Microsoft Outlook Express 6.00.2800.1106
-> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
-> X-Antivirus-Remover: Message filtered with wsAV v2.0.0 Build 001
->
-> Hi everybody, I bought an early rebel kit and it doesn't have the F89
-> doublers that lie inside the tailcone. They join the side skins to the
-> Fus 30 tail wrap. Does anybody know the thickness of those pieces so I
-> can fabricate them myself.
-> Thanks
-> Wayne 333R





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Wayne Ouellette

f89 fuselage pieces

Post by Wayne Ouellette » Sat Feb 18, 2012 10:09 am

Thanks Brad, they are very simple pieces to make....just a bit of .020 which
seems pretty light to me. I have some .025 here that I will make them out
of.
Thanks again
Wayne 333R
----- Original Message -----
From: <brad@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, February 04, 2005 5:17 PM
Subject: RE: f89 fuselage pieces

Wayne,

I had the same problem. I don't know the guage but it is a formed part.
It seems to me that they wern't too expensive from MAM.

Brad R195





On 2/4/2005 5:23 AM, W.OUELLETTE@SYMPATICO.CA wrote to REBEL-BUILDERS:

-> Received: by dcsol.com (Wildcat! SMTP Router v6.0.451.3)
-> for rebel-builders@dcsol.com; Fri, 04 Feb 2005 05:24:36 -0900
-> Received: from tomts5.bellnexxia.net ([209.226.175.25]) EHLO=tomts5-
srv.bellnexxia.net
-> by dcsol.com (Wildcat! SMTP v6.0.451.3) with SMTP
-> id 383032343; Fri, 04 Feb 2005 05:24:34 -0900
-> Received: from useraobwrjfvto ([206.172.171.168])
-> by tomts5-srv.bellnexxia.net
-> (InterMail vM.5.01.06.10 201-253-122-130-110-20040306) with
SMTP
-> id <20050204142431.HUXQ2026.tomts5-
srv.bellnexxia.net@useraobwrjfvto>
-> for <rebel-builders@dcsol.com>; Fri, 4 Feb 2005
09:24:31 -0500
-> Message-ID: <001501c50ac5$18043090$a8abacce@useraobwrjfvto>
-> From: "Wayne Ouellette" <w.ouellette@sympatico.ca>
-> To: <rebel-builders@dcsol.com>
-> Subject: f89 fuselage pieces
-> Date: Fri, 4 Feb 2005 09:23:26 -0500
-> X-Orig-MIME-Version: 1.0
-> X-Orig-Content-Type: multipart/alternative; boundary="----
=_NextPart_000_0012_01C50A9B.2E3CC3B0"
-> X-Priority: 3
-> X-MSMail-Priority: Normal
-> X-Mailer: Microsoft Outlook Express 6.00.2800.1106
-> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
-> X-Antivirus-Remover: Message filtered with wsAV v2.0.0 Build 001
->
-> Hi everybody, I bought an early rebel kit and it doesn't have the F89
-> doublers that lie inside the tailcone. They join the side skins to the
-> Fus 30 tail wrap. Does anybody know the thickness of those pieces so I
-> can fabricate them myself.
-> Thanks
-> Wayne 333R





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”