How much Pro Seal?

[S & L Aldrich]

Randy, Don, anybody,
Approximately how much of the brush able PS 890 is enough for fixing the quick build leaks? Pint kit or Qt?

Thanks,
Scott Aldrich
N174SL Moose #174

[klehman]

Scott
I coated all the interior joints and rivets on a 3 bay Rebel tank with a
3.5 oz. semkit of brushable.
Ken

S & L Aldrich wrote:

Randy, Don, anybody,
Approximately how much of the brush able PS 890 is enough for fixing
the quick build leaks? Pint kit or Qt?

Thanks,
Scott Aldrich
N174SL Moose #174

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[RJBWoodman]

If you have quite a few leaks per tank as we did, you will need to brush all the seams, joints, rivets, stringers, etc of the tank interiors. If this is the case we used 3 pints total for the brushing process only. Thats after 2 pints of putty meticulously working possible leak by possible leak. Its not fun. ( Wish i was done ) I have my final pint to go out and finish the job. If you have a couple leaks, know where they are, i think you should brush one pint per tank as a final "seal all" coating for a perfect job. Good luck.
Randy Bowers SR130

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------