Rebel name plate

allsure · Post by **allsure** » Fri Feb 17, 2012 9:37 pm

G'day

My Rebel is nearing completion, and I am going to get the factory supplied identification plate engraved today.

Just where is a good place to fix the plate to the Rebel?

Thanks and regards

Ian Donaldson

Bob Patterson · Post by **Bob Patterson** » Fri Feb 17, 2012 9:37 pm

Hi Ian !

The U.S. laws call for the plate to go on the outside,
where it can be easily seen - most mount them on the fuselage
side, below the stabilizer. In Canada, they've recently changed,
and I think they can be inside, as long as they're visible from
outside (and legible). That means door posts, or near the back window,
somehow. This prevents passers-by from easily defacing the plate ...

Does your government have a preferred position ??

.....bobp

-------------------------------orig.-------------------------------
At 09:31 AM 12/24/01 +1100, you wrote:

G'day

My Rebel is nearing completion, and I am going to get the factory supplied

identification plate engraved today.

Just where is a good place to fix the plate to the Rebel?

Thanks and regards

Ian Donaldson
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=windows-1252" http-equiv=Content-Type>
<META content="MSHTML 5.00.2919.6307" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>G'day</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>My Rebel is nearing completion, and I am going to get the
factory supplied identification plate engraved today.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>Just where is a good place to fix the plate to the
Rebel?</FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV><FONT size=2>Thanks and regards</FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV><FONT size=2>Ian Donaldson</FONT></DIV></BODY></HTML>

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

allsure · Post by **allsure** » Fri Feb 17, 2012 9:37 pm

G'day Bob

Thanks for your reply.

We don't have any legislation regarding the placement of the plate. All they
say is that it must be firmly
attached and made out of "fireproof" material.

I wanted to display it, but not to ostentatiously!
regards

Ian

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea · Post by **Wayne G. O'Shea** » Fri Feb 17, 2012 9:37 pm

Transport Canada started requesting that it go on the tailcone, under the
stab, as after the post crash fire the tail feathers are always left behind
to identify what it was!!!!

----- Original Message -----
From: "allsure" <allsure@iprimus.com.au>
To: <murphy-rebel@dcsol.com>
Sent: Sunday, December 23, 2001 7:44 PM
Subject: Re: Rebel name plate

G'day Bob

Thanks for your reply.

We don't have any legislation regarding the placement of the plate. All

they

say is that it must be firmly
attached and made out of "fireproof" material.

I wanted to display it, but not to ostentatiously!
regards

Ian

** To unsubscribe, send e-mail to list-server@dcsol.com with

**

** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself

**

** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm

**

** To contact the list admin, e-mail mike.davis@dcsol.com

**

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

allsure · Post by **allsure** » Fri Feb 17, 2012 9:37 pm

G'day Wayne

I'm more optomistic than Transport Canada!
I want to display it somewhere.

Regards

Ian Donaldson

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

LisaFly99 · Post by **LisaFly99** » Fri Feb 17, 2012 9:37 pm

In a message dated 12/23/01 7:10:06 PM Central Standard Time, oifa@irishfield.on.ca writes:

Transport Canada started requesting that it go on the tailcone, under the
stab,

Same place the FAA want's it placed. USA
Phil&Lisa Smith
#460R
N414D

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Rick Harper · Post by **Rick Harper** » Fri Feb 17, 2012 9:37 pm

DON'T !

The factory one is NOT acceptable under one Experimental system

You need one from the SAAA Ian !

Rick

----- Original Message -----
From: allsure (allsure@iprimus.com.au)
To: murphy-rebel@dcsol.com (murphy-rebel@dcsol.com)
Sent: Monday, 24 December 2001 9:31
Subject: Rebel name plate

G'day

My Rebel is nearing completion, and I am going to get the factory supplied identification plate engraved today.

Just where is a good place to fix the plate to the Rebel?

Thanks and regards

Ian Donaldson

Rick Harper · Post by **Rick Harper** » Fri Feb 17, 2012 9:37 pm

Ian...I put ours just in front of the passenger door hinge...on the OUTSIDE
(for all to see)

Rick & Wendy

----- Original Message -----
From: allsure <allsure@iprimus.com.au>
To: <murphy-rebel@dcsol.com>
Sent: Monday, 24 December 2001 12:26
Subject: Re: Rebel name plate

G'day Wayne

I'm more optomistic than Transport Canada!
I want to display it somewhere.

Regards

Ian Donaldson

** To unsubscribe, send e-mail to list-server@dcsol.com with

**

** UNSUBSCRIBE MURPHY-REBEL in the message body on a line by itself

**

** Archives located at http://rebel:builder@www.dcsol.com:81/default.htm

**

** To contact the list admin, e-mail mike.davis@dcsol.com

**

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------