Hi Roland
Mine is a simple TED stub antennae mounted centrally on the floor just in
front of the forward FUS 5
Nig
745E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Roland
Kriening
Sent: 06 November 2011 17:30
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Transponder Antenna
Seems like one of the last warm days of the year so I thought I would do a
bit of work in the garage. Installing the antennas today. Already have the
radio and elt antennas in place. Now looking for a place for my transponder
antenna. The floor is already closed up so cant run coaxial there. My inner
floor goes all the way back to the elevator pulley. I could mount just to
the rear of that or just in front of the main cage but that puts it in
between the gear. Any ideas or suggestions.
Roland
R56
(currently wiring the panel, while I wait for my engine)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4599 - Release Date: 11/05/11
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4599 - Release Date: 11/05/11
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
[rebel-builders] Transponder Antenna
-
Roland Kriening
[rebel-builders] Transponder Antenna
Hi Nig,
Remind me again what the FUS 5 is?
Roland
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
N.Smith
Sent: Sunday, November 06, 2011 12:38 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Transponder Antenna
Hi Roland
Mine is a simple TED stub antennae mounted centrally on the floor just in
front of the forward FUS 5
Nig
745E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Roland
Kriening
Sent: 06 November 2011 17:30
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Transponder Antenna
Seems like one of the last warm days of the year so I thought I would do a
bit of work in the garage. Installing the antennas today. Already have the
radio and elt antennas in place. Now looking for a place for my transponder
antenna. The floor is already closed up so cant run coaxial there. My inner
floor goes all the way back to the elevator pulley. I could mount just to
the rear of that or just in front of the main cage but that puts it in
between the gear. Any ideas or suggestions.
Roland
R56
(currently wiring the panel, while I wait for my engine)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4599 - Release Date: 11/05/11
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4599 - Release Date: 11/05/11
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Remind me again what the FUS 5 is?
Roland
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
N.Smith
Sent: Sunday, November 06, 2011 12:38 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Transponder Antenna
Hi Roland
Mine is a simple TED stub antennae mounted centrally on the floor just in
front of the forward FUS 5
Nig
745E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Roland
Kriening
Sent: 06 November 2011 17:30
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Transponder Antenna
Seems like one of the last warm days of the year so I thought I would do a
bit of work in the garage. Installing the antennas today. Already have the
radio and elt antennas in place. Now looking for a place for my transponder
antenna. The floor is already closed up so cant run coaxial there. My inner
floor goes all the way back to the elevator pulley. I could mount just to
the rear of that or just in front of the main cage but that puts it in
between the gear. Any ideas or suggestions.
Roland
R56
(currently wiring the panel, while I wait for my engine)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4599 - Release Date: 11/05/11
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4599 - Release Date: 11/05/11
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
N.Smith
[rebel-builders] Transponder Antenna
Hi Roland
If I remember correctly it's the square tube running across the floor from
side to side (there's two of them) that attach to the bottom of the struts,
and have the control torque tube mounted on them. The cabin area floor sits
on them and runs rearward, but in front of them there is just the underfoot
floor skin that the rudder pedals are mounted on.
Nig
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Roland
Kriening
Sent: 06 November 2011 18:05
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Transponder Antenna
Hi Nig,
Remind me again what the FUS 5 is?
Roland
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
N.Smith
Sent: Sunday, November 06, 2011 12:38 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Transponder Antenna
Hi Roland
Mine is a simple TED stub antennae mounted centrally on the floor just in
front of the forward FUS 5
Nig
745E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Roland
Kriening
Sent: 06 November 2011 17:30
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Transponder Antenna
Seems like one of the last warm days of the year so I thought I would do a
bit of work in the garage. Installing the antennas today. Already have the
radio and elt antennas in place. Now looking for a place for my transponder
antenna. The floor is already closed up so cant run coaxial there. My inner
floor goes all the way back to the elevator pulley. I could mount just to
the rear of that or just in front of the main cage but that puts it in
between the gear. Any ideas or suggestions.
Roland
R56
(currently wiring the panel, while I wait for my engine)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4599 - Release Date: 11/05/11
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4599 - Release Date: 11/05/11
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4600 - Release Date: 11/06/11
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4600 - Release Date: 11/06/11
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
If I remember correctly it's the square tube running across the floor from
side to side (there's two of them) that attach to the bottom of the struts,
and have the control torque tube mounted on them. The cabin area floor sits
on them and runs rearward, but in front of them there is just the underfoot
floor skin that the rudder pedals are mounted on.
Nig
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Roland
Kriening
Sent: 06 November 2011 18:05
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Transponder Antenna
Hi Nig,
Remind me again what the FUS 5 is?
Roland
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
N.Smith
Sent: Sunday, November 06, 2011 12:38 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Transponder Antenna
Hi Roland
Mine is a simple TED stub antennae mounted centrally on the floor just in
front of the forward FUS 5
Nig
745E
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Roland
Kriening
Sent: 06 November 2011 17:30
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Transponder Antenna
Seems like one of the last warm days of the year so I thought I would do a
bit of work in the garage. Installing the antennas today. Already have the
radio and elt antennas in place. Now looking for a place for my transponder
antenna. The floor is already closed up so cant run coaxial there. My inner
floor goes all the way back to the elevator pulley. I could mount just to
the rear of that or just in front of the main cage but that puts it in
between the gear. Any ideas or suggestions.
Roland
R56
(currently wiring the panel, while I wait for my engine)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4599 - Release Date: 11/05/11
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4599 - Release Date: 11/05/11
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4600 - Release Date: 11/06/11
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1869 / Virus Database: 2092/4600 - Release Date: 11/06/11
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Wayne G. O'Shea
[rebel-builders] Transponder Antenna
I've put more than one thru the floor ahead of the rudder pedals. As long as
you're away from your exhaust pipes it works just fine there Roland and
makes it really simple to access/wire/inspect.
----- Original Message -----
From: "Roland Kriening" <kriening@rogers.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, November 06, 2011 12:29 PM
Subject: [rebel-builders] Transponder Antenna
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
you're away from your exhaust pipes it works just fine there Roland and
makes it really simple to access/wire/inspect.
----- Original Message -----
From: "Roland Kriening" <kriening@rogers.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, November 06, 2011 12:29 PM
Subject: [rebel-builders] Transponder Antenna
Seems like one of the last warm days of the year so I thought I would do a
bit of work in the garage. Installing the antennas today. Already have the
radio and elt antennas in place. Now looking for a place for my
transponder
antenna. The floor is already closed up so cant run coaxial there. My
inner
floor goes all the way back to the elevator pulley. I could mount just to
the rear of that or just in front of the main cage but that puts it in
between the gear. Any ideas or suggestions.
Roland
R56
(currently wiring the panel, while I wait for my engine)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Roland Kriening
[rebel-builders] Transponder Antenna
Thanks Nig and Wayne,
I thought of putting it where Nig suggested but wanted to make sure before I
drill any holes... once again an awesome resource this site is. Where else
can you get "expert" advice in less than an hour.
Roland
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Wayne
G. O'Shea
Sent: Sunday, November 06, 2011 2:02 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Transponder Antenna
I've put more than one thru the floor ahead of the rudder pedals. As long as
you're away from your exhaust pipes it works just fine there Roland and
makes it really simple to access/wire/inspect.
----- Original Message -----
From: "Roland Kriening" <kriening@rogers.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, November 06, 2011 12:29 PM
Subject: [rebel-builders] Transponder Antenna
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I thought of putting it where Nig suggested but wanted to make sure before I
drill any holes... once again an awesome resource this site is. Where else
can you get "expert" advice in less than an hour.
Roland
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Wayne
G. O'Shea
Sent: Sunday, November 06, 2011 2:02 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Transponder Antenna
I've put more than one thru the floor ahead of the rudder pedals. As long as
you're away from your exhaust pipes it works just fine there Roland and
makes it really simple to access/wire/inspect.
----- Original Message -----
From: "Roland Kriening" <kriening@rogers.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, November 06, 2011 12:29 PM
Subject: [rebel-builders] Transponder Antenna
Seems like one of the last warm days of the year so I thought I would do a
bit of work in the garage. Installing the antennas today. Already have the
radio and elt antennas in place. Now looking for a place for my
transponder
antenna. The floor is already closed up so cant run coaxial there. My
inner
floor goes all the way back to the elevator pulley. I could mount just to
the rear of that or just in front of the main cage but that puts it in
between the gear. Any ideas or suggestions.
Roland
R56
(currently wiring the panel, while I wait for my engine)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Ron Shannon
[rebel-builders] Transponder Antenna
I also put my TED monopole on the floor just forward of the cage, pretty
far to the right side to accommodate other things in the area. Seems to
work fine, including for Mode S traffic. I put a curved, removable "bridge"
foot guard over the top of the coax connection inside, so passenger feet
won't bang on it. Some photos are at:
http://n254mr.com/node/1342
http://n254mr.com/node/1481
http://n254mr.com/node/1484
Don't seem to have a decent photo of the bridge cover within reach yet, but
will take and send or post one if you're interested.
Ron
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
far to the right side to accommodate other things in the area. Seems to
work fine, including for Mode S traffic. I put a curved, removable "bridge"
foot guard over the top of the coax connection inside, so passenger feet
won't bang on it. Some photos are at:
http://n254mr.com/node/1342
http://n254mr.com/node/1481
http://n254mr.com/node/1484
Don't seem to have a decent photo of the bridge cover within reach yet, but
will take and send or post one if you're interested.
Ron
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
