Hello Rebel Builders:
Rebel Manual 23.0 Door Assembly (29/06/98) Pg.7, Number 17
The manual says to attach the door to the forward vertical stainless hinge using 1/8 x 1/8 Stainless rivets (assumed RV5402). Unfortunately, I do not have the RV5402's on my MAM packing list and none in stock. The closest stainless rivet I have in my stock is RV5404 (1/8 x 1/4) which look a bit long for the thickness of material. Is this an acceptable rivet or should I order some RV5402's for the application?
Thank you in advance for information.
Terry Dazey
Rebel 662
Lake Tapps, Washington USA
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Rebel Door Hinge Rivets
Rebel Door Hinge Rivets
On 6/12/2011 5:57 AM, dazey@turbousa.com wrote to rebel-builders:
-> Hello Rebel Builders:
->
-> Rebel Manual 23.0 Door Assembly (29/06/98) Pg.7, Number 17
->
-> The manual says to attach the door to the forward vertical stainless
hinge using 1/8 x 1/8 Stainless rivets (assumed RV5402). Unfortunately, I
do not have the RV5402's on my MAM packing list and none in stock. The
closest stainless rivet I have in my stock is RV5404 (1/8 x 1/4) which look
a bit long for the thickness of material. Is this an acceptable rivet or
should I order some RV5402's for the application?
->
-> Thank you in advance for information.
->
-> Terry Dazey
-> Rebel 662
-> Lake Tapps, Washington USA
Hi Terry,
I have used aluminium rivets in 818R.......because I forgot! I've
decided to go with them for now and keep an eye. I figure if there is going
to be a problem it will be with the upper and lower ones and I'll replace
them with stainless if required. Hope this helps.
Cheers Mike
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-> Hello Rebel Builders:
->
-> Rebel Manual 23.0 Door Assembly (29/06/98) Pg.7, Number 17
->
-> The manual says to attach the door to the forward vertical stainless
hinge using 1/8 x 1/8 Stainless rivets (assumed RV5402). Unfortunately, I
do not have the RV5402's on my MAM packing list and none in stock. The
closest stainless rivet I have in my stock is RV5404 (1/8 x 1/4) which look
a bit long for the thickness of material. Is this an acceptable rivet or
should I order some RV5402's for the application?
->
-> Thank you in advance for information.
->
-> Terry Dazey
-> Rebel 662
-> Lake Tapps, Washington USA
Hi Terry,
I have used aluminium rivets in 818R.......because I forgot! I've
decided to go with them for now and keep an eye. I figure if there is going
to be a problem it will be with the upper and lower ones and I'll replace
them with stainless if required. Hope this helps.
Cheers Mike
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------