[rebel-builders] Rebel Gas Cap

[Wayne G. O'Shea]

I have acquired the original source for them.... and have a request for
quote and minimum quantities in to the company that makes them.

If anyone is temporarily stuck... the old red rib topped Cessna Cap..
C156003 (made by CAP INC - Wichita Kansas) will work on the MAM flanged
filler neck.

Wayne

----- Original Message -----
From: "Ron Shannon" <rshannon@cruzcom.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, December 21, 2010 1:48 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

When I wanted to get a couple caps for spares, the only ones I could find
that would fit were from MAM. Whether MAM still has any to sell at this
point -- don't know. Sure would be nice to confirm another source.

Ron
N254MR




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Bob Palmer]

We didn't use the kit ones and I am pretty sure we didn't throw them out
so how ever wants them....



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[craig]

I'll take one, Bob. If you want you can email me direct and we'll arrange
it! Craig snowyrvr@mtaonline.net
----- Original Message -----
From: "Bob Palmer" <rtpalmer@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, December 21, 2010 7:38 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

We didn't use the kit ones and I am pretty sure we didn't throw them out
so how ever wants them....



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jesse Jenks]

Thanks guys, well I guess I won't have to steal anyone's caps off their plane after all. It looks like there are several options. Let us know when you find out Wayne. I looked at the ACS ones o the website, and I understand now. I always forget they have better pictures online than in the catalog.

From: snowyrvr@mtaonline.net
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Rebel Gas Cap
Date: Tue, 21 Dec 2010 19:54:44 -0900

I'll take one, Bob. If you want you can email me direct and we'll arrange
it! Craig snowyrvr@mtaonline.net
----- Original Message -----
From: "Bob Palmer" <rtpalmer@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, December 21, 2010 7:38 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

We didn't use the kit ones and I am pretty sure we didn't throw them out
so how ever wants them....



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Curtis Langholz]

The filler neck looks the same size as the one on my Cessna 120. I got STC'd replacement ones from Monarch. Might be worth a fit check on a 120/140 if you have one at your airport.

Curtis

From: jessejenks@hotmail.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Rebel Gas Cap
Date: Tue, 21 Dec 2010 14:16:10 -0800


Oh man, don't leave your planes out of sight guys...Rebel fuel caps are going to become a hot commodity. I knew I should have riveted my filler neck flanges to the outside of the tank skins. Now when I lose a fuel cap I'm going to have to open the tank just to put on a different filler neck/cap combo. That's what vanity will get you.
Seriously though, there must be a replacement out there somewhere. If not from mam then hopefully they would divulge the supplier. It looks like a generic part...probably not aviation.

From: rshannon@cruzcom.com
Date: Tue, 21 Dec 2010 11:50:13 -0800
Subject: Re: [rebel-builders] Rebel Gas Cap
To: rebel-builders@dcsol.com

I haven't tried that one, but I did try their "Piper" cap (SKU:
E-482-000<http://store.wagaero.com/product_info.p ... ts_id=1916>
on
the same web page) and it didn't fit.

Ron



On Tue, Dec 21, 2010 at 11:08 AM, <wayne.pederson@dcsol.com> wrote:

Have you tried Wag Aero?
They have a simular one for about $40.00

Ram Air Pressure Cap
Wag-Aero
SKU: E-481-000
$37.95

http://store.wagaero.com/index.php?cPath=601_151

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

Just waiting to clarify a few things with the company.. but of course there
is a minimum order of at least a few hundred dollars.

How many people are interested in caps.. and how many do you want.... and
how many flanged filler necks? If I can get a rough count I will decide
whether to proceed or not with this.

Vented caps, in Stainless steel (orig are plain steel.. and I can get those
as well), are looking like about $18 each and the filler flange/neck.. $8
each

Anyone going to floats... you do NOT want flush caps, as you'll fall off the
top step into the lake trying to fuel if you don' t have that filler neck to
grab a hold of !

LMK
Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, December 21, 2010 11:25 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

I have acquired the original source for them.... and have a request for
quote and minimum quantities in to the company that makes them.

If anyone is temporarily stuck... the old red rib topped Cessna Cap..
C156003 (made by CAP INC - Wichita Kansas) will work on the MAM flanged
filler neck.

Wayne

----- Original Message -----
From: "Ron Shannon" <rshannon@cruzcom.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, December 21, 2010 1:48 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

When I wanted to get a couple caps for spares, the only ones I could find
that would fit were from MAM. Whether MAM still has any to sell at this
point -- don't know. Sure would be nice to confirm another source.

Ron
N254MR




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Andrew Burr]

I wouldn't waste your time I found caps for $8.00.

Andrew E Burr XIV
Vertical performance LLc
Po Box 213
Cassville MO 65625


VPHelo, LLc has paid for the design and engineering for every component and
holds ownership of all intellectual property for each component.




________________________________
From: Wayne G. O'Shea <oifa@irishfield.on.ca>
To: rebel-builders@dcsol.com
Sent: Thu, December 23, 2010 11:32:40 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

Just waiting to clarify a few things with the company.. but of course there
is a minimum order of at least a few hundred dollars.

How many people are interested in caps.. and how many do you want.... and
how many flanged filler necks? If I can get a rough count I will decide
whether to proceed or not with this.

Vented caps, in Stainless steel (orig are plain steel.. and I can get those
as well), are looking like about $18 each and the filler flange/neck.. $8
each

Anyone going to floats... you do NOT want flush caps, as you'll fall off the
top step into the lake trying to fuel if you don' t have that filler neck to
grab a hold of !

LMK
Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, December 21, 2010 11:25 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

I have acquired the original source for them.... and have a request for
quote and minimum quantities in to the company that makes them.

If anyone is temporarily stuck... the old red rib topped Cessna Cap..
C156003 (made by CAP INC - Wichita Kansas) will work on the MAM flanged
filler neck.

Wayne

----- Original Message -----
From: "Ron Shannon" <rshannon@cruzcom.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, December 21, 2010 1:48 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

When I wanted to get a couple caps for spares, the only ones I could find
that would fit were from MAM. Whether MAM still has any to sell at this
point -- don't know. Sure would be nice to confirm another source.

Ron
N254MR




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

It's not about wasting time Andrew.. there are many of the newer kits
(Rebel/Elite and SR) that went out the Murphy door with flush seadog
caps/fillers. Some of those guys might want to get the proper neck and cap
for a much better application... and an important hand hold as far as I'm
concerned for float equipped filling safety.

I'm just offering to be the distribution source, considering the few hundred
dollar minimum to get an order out of the manufacturer. My only gain is I
could use a few spare caps around here as well.

Wayne

----- Original Message -----
From: "Andrew Burr" <verticalperformance@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 24, 2010 8:44 AM
Subject: Re: [rebel-builders] Rebel Gas Cap

I wouldn't waste your time I found caps for $8.00.

Andrew E Burr XIV
Vertical performance LLc
Po Box 213
Cassville MO 65625


VPHelo, LLc has paid for the design and engineering for every component
and
holds ownership of all intellectual property for each component.




________________________________
From: Wayne G. O'Shea <oifa@irishfield.on.ca>
To: rebel-builders@dcsol.com
Sent: Thu, December 23, 2010 11:32:40 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

Just waiting to clarify a few things with the company.. but of course
there
is a minimum order of at least a few hundred dollars.

How many people are interested in caps.. and how many do you want.... and
how many flanged filler necks? If I can get a rough count I will decide
whether to proceed or not with this.

Vented caps, in Stainless steel (orig are plain steel.. and I can get
those
as well), are looking like about $18 each and the filler flange/neck.. $8
each

Anyone going to floats... you do NOT want flush caps, as you'll fall off
the
top step into the lake trying to fuel if you don' t have that filler neck
to
grab a hold of !

LMK
Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, December 21, 2010 11:25 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

I have acquired the original source for them.... and have a request for
quote and minimum quantities in to the company that makes them.

If anyone is temporarily stuck... the old red rib topped Cessna Cap..
C156003 (made by CAP INC - Wichita Kansas) will work on the MAM flanged
filler neck.

Wayne

----- Original Message -----
From: "Ron Shannon" <rshannon@cruzcom.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, December 21, 2010 1:48 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

When I wanted to get a couple caps for spares, the only ones I could
find
that would fit were from MAM. Whether MAM still has any to sell at this
point -- don't know. Sure would be nice to confirm another source.

Ron
N254MR




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Andrew Burr]

You can buy the cap and the neck over the counter so why go thorough the
trouble.

Andrew E Burr XIV
Vertical performance LLc
Po Box 213
Cassville MO 65625


VPHelo, LLc has paid for the design and engineering for every component and
holds ownership of all intellectual property for each component.




________________________________
From: Wayne G. O'Shea <oifa@irishfield.on.ca>
To: rebel-builders@dcsol.com
Sent: Sat, December 25, 2010 1:48:45 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

It's not about wasting time Andrew.. there are many of the newer kits
(Rebel/Elite and SR) that went out the Murphy door with flush seadog
caps/fillers. Some of those guys might want to get the proper neck and cap
for a much better application... and an important hand hold as far as I'm
concerned for float equipped filling safety.

I'm just offering to be the distribution source, considering the few hundred
dollar minimum to get an order out of the manufacturer. My only gain is I
could use a few spare caps around here as well.

Wayne

----- Original Message -----
From: "Andrew Burr" <verticalperformance@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 24, 2010 8:44 AM
Subject: Re: [rebel-builders] Rebel Gas Cap

I wouldn't waste your time I found caps for $8.00.

Andrew E Burr XIV
Vertical performance LLc
Po Box 213
Cassville MO 65625


VPHelo, LLc has paid for the design and engineering for every component
and
holds ownership of all intellectual property for each component.




________________________________
From: Wayne G. O'Shea <oifa@irishfield.on.ca>
To: rebel-builders@dcsol.com
Sent: Thu, December 23, 2010 11:32:40 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

Just waiting to clarify a few things with the company.. but of course
there
is a minimum order of at least a few hundred dollars.

How many people are interested in caps.. and how many do you want.... and
how many flanged filler necks? If I can get a rough count I will decide
whether to proceed or not with this.

Vented caps, in Stainless steel (orig are plain steel.. and I can get
those
as well), are looking like about $18 each and the filler flange/neck.. $8
each

Anyone going to floats... you do NOT want flush caps, as you'll fall off
the
top step into the lake trying to fuel if you don' t have that filler neck
to
grab a hold of !

LMK
Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, December 21, 2010 11:25 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

I have acquired the original source for them.... and have a request for
quote and minimum quantities in to the company that makes them.

If anyone is temporarily stuck... the old red rib topped Cessna Cap..
C156003 (made by CAP INC - Wichita Kansas) will work on the MAM flanged
filler neck.

Wayne

----- Original Message -----
From: "Ron Shannon" <rshannon@cruzcom.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, December 21, 2010 1:48 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

When I wanted to get a couple caps for spares, the only ones I could
find
that would fit were from MAM. Whether MAM still has any to sell at this
point -- don't know. Sure would be nice to confirm another source.

Ron
N254MR




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Drew Dalgleish]

At 12:13 PM 25/12/2010 -0800, you wrote:

You can buy the cap and the neck over the counter so why go thorough the
trouble.

Andrew E Burr XIV
Vertical performance LLc
Po Box 213
Cassville MO 65625

I missed that post Andrew. Where did you find caps for sale?
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Andrew Burr]

You can buy the caps and the necks from ACS. Also a cap from an early modle
Harley Davidson will work they sell for about $5.00

Andrew E Burr XIV
Vertical performance LLc
Po Box 213
Cassville MO 65625


VPHelo, LLc has paid for the design and engineering for every component and
holds ownership of all intellectual property for each component.




________________________________
From: Drew Dalgleish <drewjan@cabletv.on.ca>
To: rebel-builders@dcsol.com
Sent: Sat, December 25, 2010 2:48:58 PM
Subject: Re: [rebel-builders] Rebel Gas Cap

At 12:13 PM 25/12/2010 -0800, you wrote:

You can buy the cap and the neck over the counter so why go thorough the
trouble.

Andrew E Burr XIV
Vertical performance LLc
Po Box 213
Cassville MO 65625

I missed that post Andrew. Where did you find caps for sale?
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------