Making my door frames today and of course, I cut the curved D-2 a little
short on one side. (Doh!) I'm thinking I'll just cut even further, making room
for the horizontal tube pieces (that separate upper window from lower door
half) to go full length of the door opening. In other words, the curved D-2
stubs underneath the horizontal tube, instead of the horizontal tube stubbing
into D-2. And I'd repeat this to the top halves too for symmetry, i.e. to make
it look like I know what I'm doing.
Looking at the rest of the door plans, I can't see any problems with this fix,
but shout if you see I'm missing something.
Thanks,
-Ben/ 496R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Rebel door frames
Rebel door frames
FWIW, I just went ahead an did the fix this way. I almost didn't post the
question in the first place, thinking this can't possibly matter. But
assumptions or overconfidence have so many ways to bite back.
-Ben
On 8/14/2010 9:27 PM, bransom wrote to rebel-builders:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
question in the first place, thinking this can't possibly matter. But
assumptions or overconfidence have so many ways to bite back.
-Ben
On 8/14/2010 9:27 PM, bransom wrote to rebel-builders:
roomMaking my door frames today and of course, I cut the curved D-2 a little
short on one side. (Doh!) I'm thinking I'll just cut even further, making
stubbingfor the horizontal tube pieces (that separate upper window from lower door
half) to go full length of the door opening. In other words, the curved D-2
stubs underneath the horizontal tube, instead of the horizontal tube
makeinto D-2. And I'd repeat this to the top halves too for symmetry, i.e. to
it look like I know what I'm doing.
Looking at the rest of the door plans, I can't see any problems with this fix,
but shout if you see I'm missing something.
Thanks,
-Ben/ 496R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------