Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] Up to date builders manual needed (Float st

Converted from Wildcat! database. (read only)
Locked
N.Smith

[rebel-builders] Up to date builders manual needed (Float stiffeners)

Post by N.Smith » Sun Feb 19, 2012 6:24 pm

Hi Curtis

The Firewall stiffeners are part of the "Ontario Mod's" that are highly
recommended - courtesy of Wayne I think.

I've fitted them to my Elite. One large section across the bottom and 2
smaller triangles at the upper motor mount attach points.

Other recommendations are stronger (thicker) corner wraps, and 2 under floor
stiffeners running from near the bottom motor mount points aft towards the
FUS-5 carrythrough. Pictures already in the archives I think.

Nig
745E

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Curtis
Langholz
Sent: 08 June 2010 23:44
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Up to date builders manual needed


Also I have some questions regarding the doublers / stiffeners for putting
the Rebel on floats. Have the fuselage complete to the firewall and the rear
float attach points are in, just completed rear wing attach bracket
installation. Also made the float fix doublers near the wing attach points.
I have seen some of the builders pictures with a big doubler on the
firewall, what is the problem with that area? Is there any stiffening needed
around the upper or lower motor mount brackets? It seems a little flimsy
there to me. Thanks in advance for any assistance...



Curtis

N175CL
From: kriening@rogers.com
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Up to date builders manual needed
Date: Tue, 8 Jun 2010 12:02:46 -0400

Looking for a copy of an up to date builders manual. Tried Jeff at MAM a
few
times without success. Seems the copies I was given from the previous
builder are not complete. I have found the odd missing page. Would like to
have the complete set.

Will gladly pay copy and shipping, if anyone can help me out.

Roland
London, Ontario, Canada
R56

BTW... just starting fus cage. Starting to look like and airplane.







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



_________________________________________________________________
Hotmail is redefining busy with tools for the New Busy. Get more from your
inbox.
http://www.windowslive.com/campaign/the ... MTAGL:ON:W
L:en-US:WM_HMP:042010_2



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Locked