Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] prop spacers

Converted from Wildcat! database. (read only)
Locked
Drew Dalgleish

[rebel-builders] prop spacers

Post by Drew Dalgleish » Sun Feb 19, 2012 6:23 pm

I don't have a spacer on my prop with a piper tri pacer nosebowl. If you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
Hi all



Does the rebel with 0-320 require a spacer to put spinner and prop clear of
the nose bowl, how much of a spacer is needed

Is it possible to push cowl and nose bowl back far enough so a space is not
needed



Cheers



mike
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Angus McKenzie

[rebel-builders] prop spacers

Post by Angus McKenzie » Sun Feb 19, 2012 6:23 pm

I have an extra 2" prop spacer.



Came with the 80"Borer I bought. I had a machine shop counter-sink all the holes for the prop flange so I would not have to use it. The correct bolt kit was priced at $650 for the 6+" AN bolts




Date: Fri, 4 Jun 2010 00:25:43 -0400
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Subject: Re: [rebel-builders] prop spacers

I don't have a spacer on my prop with a piper tri pacer nosebowl. If you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
Hi all



Does the rebel with 0-320 require a spacer to put spinner and prop clear of
the nose bowl, how much of a spacer is needed

Is it possible to push cowl and nose bowl back far enough so a space is not
needed



Cheers



mike
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Jones, Michael

[rebel-builders] prop spacers

Post by Jones, Michael » Sun Feb 19, 2012 6:23 pm

So aree you selling the 2" spacer, my prop has 3/8 bolts, how do I know
if your spacer will work ?

Cheers

mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:08 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


I have an extra 2" prop spacer.



Came with the 80"Borer I bought. I had a machine shop counter-sink all
the holes for the prop flange so I would not have to use it. The correct
bolt kit was priced at $650 for the 6+" AN bolts




Date: Fri, 4 Jun 2010 00:25:43 -0400
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Subject: Re: [rebel-builders] prop spacers

I don't have a spacer on my prop with a piper tri pacer nosebowl. If
you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
Hi all



Does the rebel with 0-320 require a spacer to put spinner and prop
clear of
the nose bowl, how much of a spacer is needed

Is it possible to push cowl and nose bowl back far enough so a space
is not
needed



Cheers



mike
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Angus McKenzie

[rebel-builders] prop spacers

Post by Angus McKenzie » Sun Feb 19, 2012 6:23 pm

So yes, I'll sell the 2"spacer. I'll have to go to the hangar (Sun.) and measure the bolt size but I think it's 3/8th's".

Half of AC Spruce price sound OK?
Subject: RE: [rebel-builders] prop spacers
Date: Fri, 4 Jun 2010 08:11:38 -0400
From: Michael.Jones@snclavalin.com
To: rebel-builders@dcsol.com

So aree you selling the 2" spacer, my prop has 3/8 bolts, how do I know
if your spacer will work ?

Cheers

mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:08 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


I have an extra 2" prop spacer.



Came with the 80"Borer I bought. I had a machine shop counter-sink all
the holes for the prop flange so I would not have to use it. The correct
bolt kit was priced at $650 for the 6+" AN bolts




Date: Fri, 4 Jun 2010 00:25:43 -0400
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Subject: Re: [rebel-builders] prop spacers

I don't have a spacer on my prop with a piper tri pacer nosebowl. If
you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
Hi all



Does the rebel with 0-320 require a spacer to put spinner and prop
clear of
the nose bowl, how much of a spacer is needed

Is it possible to push cowl and nose bowl back far enough so a space
is not
needed



Cheers



mike
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Jones, Michael

[rebel-builders] prop spacers

Post by Jones, Michael » Sun Feb 19, 2012 6:23 pm

Sounds great to me,
what about bolt pattern I have sae2, 3/8 bolts,
When can I pick up,
Contact me at

Michael.jones@snclavalin.com

We can work out the details

cheers


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:22 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


So yes, I'll sell the 2"spacer. I'll have to go to the hangar (Sun.)
and measure the bolt size but I think it's 3/8th's".

Half of AC Spruce price sound OK?
Subject: RE: [rebel-builders] prop spacers
Date: Fri, 4 Jun 2010 08:11:38 -0400
From: Michael.Jones@snclavalin.com
To: rebel-builders@dcsol.com

So aree you selling the 2" spacer, my prop has 3/8 bolts, how do I
know
if your spacer will work ?

Cheers

mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:08 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


I have an extra 2" prop spacer.



Came with the 80"Borer I bought. I had a machine shop counter-sink all
the holes for the prop flange so I would not have to use it. The
correct
bolt kit was priced at $650 for the 6+" AN bolts




Date: Fri, 4 Jun 2010 00:25:43 -0400
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Subject: Re: [rebel-builders] prop spacers

I don't have a spacer on my prop with a piper tri pacer nosebowl. If
you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
Hi all



Does the rebel with 0-320 require a spacer to put spinner and prop
clear of
the nose bowl, how much of a spacer is needed

Is it possible to push cowl and nose bowl back far enough so a
space
is not
needed



Cheers



mike
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Angus McKenzie

[rebel-builders] prop spacers

Post by Angus McKenzie » Sun Feb 19, 2012 6:23 pm

Hi Mike, My engine is 0-320-A2B from and American Champion Challenger GCBC and I'm not certain of the SAE pattern, I think it's 3/8" maybe someone will jump in here and tell us so you'll know before I go to the hangar and check the pattern/size.

I'm in St.Thomas at my hangar Sun morning to fly the Rebel to Reeces Corners for the fly-in, be back mid afternoon.

Can mail it if you want
Subject: RE: [rebel-builders] prop spacers
Date: Fri, 4 Jun 2010 08:26:59 -0400
From: Michael.Jones@snclavalin.com
To: rebel-builders@dcsol.com

Sounds great to me,
what about bolt pattern I have sae2, 3/8 bolts,
When can I pick up,
Contact me at

Michael.jones@snclavalin.com

We can work out the details

cheers


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:22 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


So yes, I'll sell the 2"spacer. I'll have to go to the hangar (Sun.)
and measure the bolt size but I think it's 3/8th's".

Half of AC Spruce price sound OK?
Subject: RE: [rebel-builders] prop spacers
Date: Fri, 4 Jun 2010 08:11:38 -0400
From: Michael.Jones@snclavalin.com
To: rebel-builders@dcsol.com

So aree you selling the 2" spacer, my prop has 3/8 bolts, how do I
know
if your spacer will work ?

Cheers

mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:08 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


I have an extra 2" prop spacer.



Came with the 80"Borer I bought. I had a machine shop counter-sink all
the holes for the prop flange so I would not have to use it. The
correct
bolt kit was priced at $650 for the 6+" AN bolts




Date: Fri, 4 Jun 2010 00:25:43 -0400
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Subject: Re: [rebel-builders] prop spacers

I don't have a spacer on my prop with a piper tri pacer nosebowl. If
you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
clear of
space
is not
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Jones, Michael

[rebel-builders] prop spacers

Post by Jones, Michael » Sun Feb 19, 2012 6:23 pm

Check the size and let me know if it will fit, my engine is 0-320 b3b
160 hp, 3/8" prop bolts and sae2 flange pattern
If it all works will take it , mailing is fine or can pick up, either
works
Let me know when you have details

cheers

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:41 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


Hi Mike, My engine is 0-320-A2B from and American Champion Challenger
GCBC and I'm not certain of the SAE pattern, I think it's 3/8" maybe
someone will jump in here and tell us so you'll know before I go to the
hangar and check the pattern/size.

I'm in St.Thomas at my hangar Sun morning to fly the Rebel to Reeces
Corners for the fly-in, be back mid afternoon.

Can mail it if you want
Subject: RE: [rebel-builders] prop spacers
Date: Fri, 4 Jun 2010 08:26:59 -0400
From: Michael.Jones@snclavalin.com
To: rebel-builders@dcsol.com

Sounds great to me,
what about bolt pattern I have sae2, 3/8 bolts,
When can I pick up,
Contact me at

Michael.jones@snclavalin.com

We can work out the details

cheers


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Angus McKenzie
Sent: June 4, 2010 8:22 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


So yes, I'll sell the 2"spacer. I'll have to go to the hangar (Sun.)
and measure the bolt size but I think it's 3/8th's".

Half of AC Spruce price sound OK?
Subject: RE: [rebel-builders] prop spacers
Date: Fri, 4 Jun 2010 08:11:38 -0400
From: Michael.Jones@snclavalin.com
To: rebel-builders@dcsol.com

So aree you selling the 2" spacer, my prop has 3/8 bolts, how do I
know
if your spacer will work ?

Cheers

mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf
Of
Angus McKenzie
Sent: June 4, 2010 8:08 AM
To: Mike Davis
Subject: RE: [rebel-builders] prop spacers


I have an extra 2" prop spacer.



Came with the 80"Borer I bought. I had a machine shop counter-sink
all
the holes for the prop flange so I would not have to use it. The
correct
bolt kit was priced at $650 for the 6+" AN bolts




Date: Fri, 4 Jun 2010 00:25:43 -0400
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Subject: Re: [rebel-builders] prop spacers

I don't have a spacer on my prop with a piper tri pacer nosebowl.
If
you
have the speed cowl I think you need one.

At 04:22 PM 03/06/2010 -0400, you wrote:
prop
clear of
space
is not
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”