[rebel-builders] Engine mount

[Ron Stahla]

Jay,

I have ordered one from Murphy. I have not received a price yet but it was about $400.

Ron

From: jayyau28@hotmail.com
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Engine mount
Date: Tue, 1 Jun 2010 08:55:57 -0700


Does any one know where to buy the engine mount for Rebel, for O-320 Mattituck engine? what's the approx price?



Jay

_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/the ... P:042010_1



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/the ... P:042010_4



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

A dynafocal ring alone from ACS was $220 last month.. doubt you're gonna get
that mount for $400 from MAM...but I could be wrong.

Jay.. what mount and engine do you have now? Conical (straight bolts) or
dynafocal (bolts point towards engines centre)?

If you are just looking to upgrade your engine from O-235 / O-290 to an
O-320.. they will all fit the same mounts, unless you change case styles..
ie conical to dynafocal or visa versa

----- Original Message -----
From: "Ron Stahla" <rmstahla@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 9:40 PM
Subject: RE: [rebel-builders] Engine mount

Jay,

I have ordered one from Murphy. I have not received a price yet but it
was about $400.

Ron

From: jayyau28@hotmail.com
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Engine mount
Date: Tue, 1 Jun 2010 08:55:57 -0700


Does any one know where to buy the engine mount for Rebel, for O-320
Mattituck engine? what's the approx price?



Jay

_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your
inbox.
http://www.windowslive.com/campaign/the ... P:042010_1



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with
Hotmail.
http://www.windowslive.com/campaign/the ... P:042010_4



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Charlie Eubanks]

While you guys are talking about engine mounts maybe you can answer a
question for me. I have Murphy's Dynafocal mount for my Lyc. O-235- L2C but
I need the part number for either the Barry or the Lord Dynafocal mounts. I
assume that part number is specified by Murphy so I just sent them an e-mail
but have not received their reply as yet.
Charlie E. 802R


----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 8:51 PM
Subject: Re: [rebel-builders] Engine mount

A dynafocal ring alone from ACS was $220 last month.. doubt you're gonna
get
that mount for $400 from MAM...but I could be wrong.

Jay.. what mount and engine do you have now? Conical (straight bolts) or
dynafocal (bolts point towards engines centre)?

If you are just looking to upgrade your engine from O-235 / O-290 to an
O-320.. they will all fit the same mounts, unless you change case styles..
ie conical to dynafocal or visa versa

----- Original Message -----
From: "Ron Stahla" <rmstahla@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 9:40 PM
Subject: RE: [rebel-builders] Engine mount

Jay,

I have ordered one from Murphy. I have not received a price yet but it
was about $400.

Ron

From: jayyau28@hotmail.com
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Engine mount
Date: Tue, 1 Jun 2010 08:55:57 -0700


Does any one know where to buy the engine mount for Rebel, for O-320
Mattituck engine? what's the approx price?



Jay

_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your
inbox.
http://www.windowslive.com/campaign/the ... P:042010_1



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with
Hotmail.
http://www.windowslive.com/campaign/the ... P:042010_4



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

Charlie ... Barry Mount.. 94150-40


----- Original Message -----
From: "Charlie Eubanks" <charlie@troyairpark.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 11:05 PM
Subject: Re: [rebel-builders] Engine mount

While you guys are talking about engine mounts maybe you can answer a
question for me. I have Murphy's Dynafocal mount for my Lyc. O-235- L2C
but
I need the part number for either the Barry or the Lord Dynafocal mounts.
I
assume that part number is specified by Murphy so I just sent them an
e-mail
but have not received their reply as yet.
Charlie E. 802R


----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 8:51 PM
Subject: Re: [rebel-builders] Engine mount

A dynafocal ring alone from ACS was $220 last month.. doubt you're gonna
get
that mount for $400 from MAM...but I could be wrong.

Jay.. what mount and engine do you have now? Conical (straight bolts) or
dynafocal (bolts point towards engines centre)?

If you are just looking to upgrade your engine from O-235 / O-290 to an
O-320.. they will all fit the same mounts, unless you change case
styles..
ie conical to dynafocal or visa versa

----- Original Message -----
From: "Ron Stahla" <rmstahla@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 9:40 PM
Subject: RE: [rebel-builders] Engine mount

Jay,

I have ordered one from Murphy. I have not received a price yet but it
was about $400.

Ron
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with
Hotmail.
http://www.windowslive.com/campaign/the ... P:042010_4



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

..and current price is $90 EACH from Aircraft Spruce...

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 11:12 PM
Subject: Re: [rebel-builders] Engine mount

Charlie ... Barry Mount.. 94150-40


----- Original Message -----
From: "Charlie Eubanks" <charlie@troyairpark.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 11:05 PM
Subject: Re: [rebel-builders] Engine mount

While you guys are talking about engine mounts maybe you can answer a
question for me. I have Murphy's Dynafocal mount for my Lyc. O-235- L2C
but
I need the part number for either the Barry or the Lord Dynafocal mounts.
I
assume that part number is specified by Murphy so I just sent them an
e-mail
but have not received their reply as yet.
Charlie E. 802R


----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 8:51 PM
Subject: Re: [rebel-builders] Engine mount

A dynafocal ring alone from ACS was $220 last month.. doubt you're gonna
get
that mount for $400 from MAM...but I could be wrong.

Jay.. what mount and engine do you have now? Conical (straight bolts) or
dynafocal (bolts point towards engines centre)?

If you are just looking to upgrade your engine from O-235 / O-290 to an
O-320.. they will all fit the same mounts, unless you change case
styles..
ie conical to dynafocal or visa versa

----- Original Message -----
From: "Ron Stahla" <rmstahla@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 9:40 PM
Subject: RE: [rebel-builders] Engine mount




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

http://www.chiefaircraft.com/Aircraft/E ... 150-40.jpg

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 11:14 PM
Subject: Re: [rebel-builders] Engine mount

..and current price is $90 EACH from Aircraft Spruce...

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 11:12 PM
Subject: Re: [rebel-builders] Engine mount

Charlie ... Barry Mount.. 94150-40


----- Original Message -----
From: "Charlie Eubanks" <charlie@troyairpark.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 11:05 PM
Subject: Re: [rebel-builders] Engine mount

While you guys are talking about engine mounts maybe you can answer a
question for me. I have Murphy's Dynafocal mount for my Lyc. O-235- L2C
but
I need the part number for either the Barry or the Lord Dynafocal
mounts.
I
assume that part number is specified by Murphy so I just sent them an
e-mail
but have not received their reply as yet.
Charlie E. 802R


----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 8:51 PM
Subject: Re: [rebel-builders] Engine mount



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jeff Micheal]

Charlie,

You can try these guys too, they've been good me in the past
http://www.skygeek.com/94150-40.html

Cheers,
Jeff




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Charlie Eubanks]

Thanks Wayne for the info on the Barry mounts
Charlie E.
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 10:12 PM
Subject: Re: [rebel-builders] Engine mount

Charlie ... Barry Mount.. 94150-40


----- Original Message -----
From: "Charlie Eubanks" <charlie@troyairpark.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 11:05 PM
Subject: Re: [rebel-builders] Engine mount

While you guys are talking about engine mounts maybe you can answer a
question for me. I have Murphy's Dynafocal mount for my Lyc. O-235- L2C
but
I need the part number for either the Barry or the Lord Dynafocal mounts.
I
assume that part number is specified by Murphy so I just sent them an
e-mail
but have not received their reply as yet.
Charlie E. 802R


----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 8:51 PM
Subject: Re: [rebel-builders] Engine mount

A dynafocal ring alone from ACS was $220 last month.. doubt you're gonna
get
that mount for $400 from MAM...but I could be wrong.

Jay.. what mount and engine do you have now? Conical (straight bolts) or
dynafocal (bolts point towards engines centre)?

If you are just looking to upgrade your engine from O-235 / O-290 to an
O-320.. they will all fit the same mounts, unless you change case
styles..
ie conical to dynafocal or visa versa

----- Original Message -----
From: "Ron Stahla" <rmstahla@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 9:40 PM
Subject: RE: [rebel-builders] Engine mount




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jay Yau]

Hi Ron and Wayne:



Ron, can you update me with your engine mount, my email: jayyau28@hotmail.com.



Wayne, the reason I'm thinking to try another mount is because my oil filler tube is too close to the mount (almost touching), which made me think the mount could be bent due to the ground loop by the builder @36 hours since new. Mine is dynafocal mount, the bolts are pointed to the center of the engine.



Do they have different dynafocal mount like Van's RV? Van's has dynafocal1 and dynafocal2, both point to the center of engine but with different angle.



Since mine is a replacement, it has to be the a identical mount. Thank you for pointing me the direction.



I'll be heading to Alaska this weekend, you guys are welcome to follow me through my web site.

www.chinesepilots.com





Jay

From: rmstahla@hotmail.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Engine mount
Date: Tue, 1 Jun 2010 20:40:27 -0500


Jay,

I have ordered one from Murphy. I have not received a price yet but it was about $400.

Ron

From: jayyau28@hotmail.com
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Engine mount
Date: Tue, 1 Jun 2010 08:55:57 -0700


Does any one know where to buy the engine mount for Rebel, for O-320 Mattituck engine? what's the approx price?



Jay

_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/the ... P:042010_1



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/the ... P:042010_4



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/the ... P:042010_1



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Charlie Eubanks]

Thanks Jeff I will give them a call
----- Original Message -----
From: "Jeff Micheal" <westcoastkitplanes@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, June 02, 2010 12:02 AM
Subject: Re: [rebel-builders] Engine mount

Charlie,

You can try these guys too, they've been good me in the past
http://www.skygeek.com/94150-40.html

Cheers,
Jeff




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Ron Stahla]

Jay,

Jeff at MAM said that the oil filter clearance for the IO320 was not suficent for their mount. there is an adapter that you can use to fix this problem.

Ron

From: jayyau28@hotmail.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Engine mount
Date: Wed, 2 Jun 2010 09:09:09 -0700


Hi Ron and Wayne:



Ron, can you update me with your engine mount, my email: jayyau28@hotmail.com.



Wayne, the reason I'm thinking to try another mount is because my oil filler tube is too close to the mount (almost touching), which made me think the mount could be bent due to the ground loop by the builder @36 hours since new. Mine is dynafocal mount, the bolts are pointed to the center of the engine.



Do they have different dynafocal mount like Van's RV? Van's has dynafocal1 and dynafocal2, both point to the center of engine but with different angle.



Since mine is a replacement, it has to be the a identical mount. Thank you for pointing me the direction.



I'll be heading to Alaska this weekend, you guys are welcome to follow me through my web site.

www.chinesepilots.com





Jay

From: rmstahla@hotmail.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Engine mount
Date: Tue, 1 Jun 2010 20:40:27 -0500


Jay,

I have ordered one from Murphy. I have not received a price yet but it was about $400.

Ron

From: jayyau28@hotmail.com
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Engine mount
Date: Tue, 1 Jun 2010 08:55:57 -0700


Does any one know where to buy the engine mount for Rebel, for O-320 Mattituck engine? what's the approx price?



Jay

_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/the ... P:042010_1



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/the ... P:042010_4



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/the ... P:042010_1



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/the ... P:042010_4



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jay Yau]

My problem is Oil filler tube touching the engine mount, not the oil filter.



Jay

From: rmstahla@hotmail.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Engine mount
Date: Wed, 2 Jun 2010 12:36:20 -0500


Jay,

Jeff at MAM said that the oil filter clearance for the IO320 was not suficent for their mount. there is an adapter that you can use to fix this problem.

Ron

From: jayyau28@hotmail.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Engine mount
Date: Wed, 2 Jun 2010 09:09:09 -0700


Hi Ron and Wayne:



Ron, can you update me with your engine mount, my email: jayyau28@hotmail.com.



Wayne, the reason I'm thinking to try another mount is because my oil filler tube is too close to the mount (almost touching), which made me think the mount could be bent due to the ground loop by the builder @36 hours since new. Mine is dynafocal mount, the bolts are pointed to the center of the engine.



Do they have different dynafocal mount like Van's RV? Van's has dynafocal1 and dynafocal2, both point to the center of engine but with different angle.



Since mine is a replacement, it has to be the a identical mount. Thank you for pointing me the direction.



I'll be heading to Alaska this weekend, you guys are welcome to follow me through my web site.

www.chinesepilots.com





Jay

From: rmstahla@hotmail.com
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Engine mount
Date: Tue, 1 Jun 2010 20:40:27 -0500


Jay,

I have ordered one from Murphy. I have not received a price yet but it was about $400.

Ron
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/the ... P:042010_4



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/the ... P:042010_1



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/the ... P:042010_4



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with Hotmail.
http://www.windowslive.com/campaign/the ... P:042010_5



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Tyler Coleman]

Hey I was wondering if any one had any pointers asto wether to go for an o-320 160 hp with a C/S prop or just a fixed pitch joby.

sincerly Tyler C.
PS. IS there any one building or flying a rebel here on vancouver Island BC. I'm in Duncan and would love to meet up with you=)

From: oifa@irishfield.on.ca
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Engine mount
Date: Tue, 1 Jun 2010 21:51:06 -0400

A dynafocal ring alone from ACS was $220 last month.. doubt you're gonna get
that mount for $400 from MAM...but I could be wrong.

Jay.. what mount and engine do you have now? Conical (straight bolts) or
dynafocal (bolts point towards engines centre)?

If you are just looking to upgrade your engine from O-235 / O-290 to an
O-320.. they will all fit the same mounts, unless you change case styles..
ie conical to dynafocal or visa versa

----- Original Message -----
From: "Ron Stahla" <rmstahla@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, June 01, 2010 9:40 PM
Subject: RE: [rebel-builders] Engine mount

Jay,

I have ordered one from Murphy. I have not received a price yet but it
was about $400.

Ron

From: jayyau28@hotmail.com
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Engine mount
Date: Tue, 1 Jun 2010 08:55:57 -0700


Does any one know where to buy the engine mount for Rebel, for O-320
Mattituck engine? what's the approx price?



Jay

_________________________________________________________________
Hotmail has tools for the New Busy. Search, chat and e-mail from your
inbox.
http://www.windowslive.com/campaign/the ... P:042010_1



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with
Hotmail.
http://www.windowslive.com/campaign/the ... P:042010_4



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
Game on: Challenge friends to great games on Messenger
http://go.microsoft.com/?linkid=9734387



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Ken Lehman]

With the power of a decent o-320 I'd rather save the weight on the nose
than take a second off the takeoff performance. THe Rebel is not the
high speed cruiser that can gain a huge amount from a C/S prop.
Ken

------------- Forwarded message follows -------------
Hey I was wondering if any one had any pointers asto wether to go for an
o-320 160 hp with a C/S prop or just a fixed pitch joby.




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Tyler Coleman]

Great point, thanks for the info Ken. keep it simple EH!

Date: Fri, 4 Jun 2010 06:23:35 -0400
From: klehman@albedo.net
To: rebel-builders@dcsol.com
Subject: Fw: RE: [rebel-builders] Engine mount

With the power of a decent o-320 I'd rather save the weight on the nose
than take a second off the takeoff performance. THe Rebel is not the
high speed cruiser that can gain a huge amount from a C/S prop.
Ken

------------- Forwarded message follows -------------
Hey I was wondering if any one had any pointers asto wether to go for an
o-320 160 hp with a C/S prop or just a fixed pitch joby.




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
Turn down-time into play-time with Messenger games
http://go.microsoft.com/?linkid=9734385



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------