Thanks Wayne, pictures are always helpful. Do you remember a fus 87? The
plans call for one. Should I assume that the fus 87 replaced the fus 86, in
the tailcone. As I mentioned, I have four of each of these parts... will I
need some elsewhere on the plane as well.
If anyone out there has a complete list of parts, numbers and
descriptions... I could use one about now. I only have bits and pieces of
lists from the previous builder, but nothing I would trust as being
comprehensive.
Roland
R56
-----Original Message-----
From:
mike.davis@dcsol.com [mailto:
mike.davis@dcsol.com] On Behalf Of Wayne
G. O'Shea
Sent: Sunday, April 18, 2010 6:52 PM
To:
rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Bulkhead Stiffeners
Surprised you have the fus 85/86's for motor mount fittings with 056 !! I
actually prefer the old "bath tub" fittings that came with mine.. 243R... as
they allow you to put in/and take out the motor mount bolts without taking
the whole mess apart, since the AN3 bolts are in the way on the fus85/86
assembly. If you have an original motor mount bath tub fitting it will work
in the tail as well, riveted to the Fus-49 bulkhead. IF not, let me know and
I'll downsize some pics of me milling a fitting for back there to correct
the old style straps.
Wayne
----- Original Message -----
From: "Roland Kriening" <
kriening@rogers.com>
To: <
rebel-builders@dcsol.com>
Sent: Sunday, April 18, 2010 6:38 PM
Subject: RE: [rebel-builders] Bulkhead Stiffeners
Thanks Wayne, greatly appreciated.
What came with my kit is 4 fus 85 and 4 fus 86. The plans call for a fus
87
to attach the fus 85, but I have no such animal. Not sure the fus 86 has
enough reach to get the two bolts in. Sometimes utter confusion when
working
with 20 year old parts, some of which have been replaced, and some not,
etc.
Roland
R56
-----Original Message-----
From:
mike.davis@dcsol.com [mailto:
mike.davis@dcsol.com] On Behalf Of
Wayne
G. O'Shea
Sent: Sunday, April 18, 2010 6:02 PM
To:
rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Bulkhead Stiffeners
Roland.. don't do it.. they and the bottom flange of the Fus-49 will crack
in short time. If you don't have the newer Fus85/86? combo for the tail
spring attach let me know and I'll send you some pics on how to mill your
own bathtub fitting for back there!
Wayne
----- Original Message -----
From: "Roland Kriening" <
kriening@rogers.com>
To: <
rebel-builders@dcsol.com>
Sent: Sunday, April 18, 2010 5:56 PM
Subject: [rebel-builders] Bulkhead Stiffeners
My 1992 plans call for four bulkhead stiffeners made out of .032 to be
inserted into the tail Fus 30 bulkhead. The 1998 plans make no mention of
the stiffeners??
Roland
R56
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------