The fwd of the outer rib is attached with ST-40, the aft of the rib is
attached with stainless angle; unless you have one of the early production
mods it was done a little bit differently with machined parts.
Jeff
On Wed, Mar 10, 2010 at 11:37 AM, Kelly M. Ewing <kelly@tru-form.ca> wrote:
Does anyone know what the most recent stab mod is for the moose? I've been
going through the archives and found a few things that I don't have. For
example in the stab I have only an angle piece of stainless( I think its
stainless) joining the most outside rib and the spar. Going through the
archives it looks like there is a more elaborate fix.
Thanks
Kelly
Moose
kelly@tru-form.ca
Enjoy your day !
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
