Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] trim servo backing plate

Converted from Wildcat! database. (read only)
Locked
Wayne G. O'Shea

[rebel-builders] trim servo backing plate

Post by Wayne G. O'Shea » Sun Feb 19, 2012 6:14 pm

Pretty sure it's just a square of .032..

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, March 06, 2010 11:29 PM
Subject: [rebel-builders] trim servo backing plate

Hello all, I hope others are getting Spring fever and getting busy. I am
cutting in my trim tab on the elevator on my rebel kit. I can not find the
EL-35 backing plate, how thick is the material it is made of ?
yours
kevin623R






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Keith Leitch

[rebel-builders] trim servo backing plate

Post by Keith Leitch » Sun Feb 19, 2012 6:15 pm

Yep, what Wayne said. I think it says somewhere in the manual that it is cut from "stock".
I have my manual here...I'll see if I can find it.
Keith R661

--- On Sat, 3/6/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Saturday, March 6, 2010, 10:47 PM


Pretty sure it's just a square of .032..

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, March 06, 2010 11:29 PM
Subject: [rebel-builders] trim servo backing plate

Hello all, I hope others are getting Spring fever and getting busy. I am
cutting in my trim tab on the elevator on my rebel kit. I can not find the
EL-35 backing plate, how thick is the material it is made of ?
yours
kevin623R






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
kevin curtis

[rebel-builders] trim servo backing plate

Post by kevin curtis » Sun Feb 19, 2012 6:15 pm

thanks guys, I will go to the hanger and check to see if I find it in my manual this time.
kevin

--- On Sun, 3/7/10, Keith Leitch <im_planecrazy@yahoo.com> wrote:


From: Keith Leitch <im_planecrazy@yahoo.com>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Sunday, March 7, 2010, 8:08 AM


Yep, what Wayne said. I think it says somewhere in the manual that it is cut from "stock".
I have my manual here...I'll see if I can find it.
Keith R661

--- On Sat, 3/6/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Saturday, March 6, 2010, 10:47 PM


Pretty sure it's just a square of .032..

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, March 06, 2010 11:29 PM
Subject: [rebel-builders] trim servo backing plate

Hello all, I hope others are getting Spring fever and getting busy. I am
cutting in my trim tab on the elevator on my rebel kit. I can not find the
EL-35 backing plate, how thick is the material it is made of ?
yours
kevin623R






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Wayne G. O'Shea

[rebel-builders] trim servo backing plate

Post by Wayne G. O'Shea » Sun Feb 19, 2012 6:15 pm

I have a full trim kit in the shop somewhere.. I'll see if the EL-35 is in
the box/wrap...

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, March 07, 2010 10:47 AM
Subject: Re: [rebel-builders] trim servo backing plate

thanks guys, I will go to the hanger and check to see if I find it in my
manual this time.
kevin

--- On Sun, 3/7/10, Keith Leitch <im_planecrazy@yahoo.com> wrote:


From: Keith Leitch <im_planecrazy@yahoo.com>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Sunday, March 7, 2010, 8:08 AM


Yep, what Wayne said. I think it says somewhere in the manual that it is
cut from "stock".
I have my manual here...I'll see if I can find it.
Keith R661

--- On Sat, 3/6/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Saturday, March 6, 2010, 10:47 PM


Pretty sure it's just a square of .032..

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, March 06, 2010 11:29 PM
Subject: [rebel-builders] trim servo backing plate

Hello all, I hope others are getting Spring fever and getting busy. I am
cutting in my trim tab on the elevator on my rebel kit. I can not find
the
EL-35 backing plate, how thick is the material it is made of ?
yours
kevin623R






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
kevin curtis

[rebel-builders] trim servo backing plate

Post by kevin curtis » Sun Feb 19, 2012 6:15 pm

great that will ease my
Top
Jeff Micheal

[rebel-builders] trim servo backing plate

Post by Jeff Micheal » Sun Feb 19, 2012 6:15 pm

Kevin, Backing Plate is made from .063 6061-T6.

Cheers,
Jeff


On Sun, Mar 7, 2010 at 2:33 PM, kevin curtis <kcs1911@yahoo.com> wrote:
great that will ease my mind to know I am useing the right material.
Yours Kevin

--- On Sun, 3/7/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Sunday, March 7, 2010, 11:24 AM


I have a full trim kit in the shop somewhere.. I'll see if the EL-35 is in
the box/wrap...

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, March 07, 2010 10:47 AM
Subject: Re: [rebel-builders] trim servo backing plate

thanks guys, I will go to the hanger and check to see if I find it in my
manual this time.
kevin

--- On Sun, 3/7/10, Keith Leitch <im_planecrazy@yahoo.com> wrote:


From: Keith Leitch <im_planecrazy@yahoo.com>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Sunday, March 7, 2010, 8:08 AM


Yep, what Wayne said. I think it says somewhere in the manual that it is
cut from "stock".
I have my manual here...I'll see if I can find it.
Keith R661

--- On Sat, 3/6/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Saturday, March 6, 2010, 10:47 PM


Pretty sure it's just a square of .032..

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, March 06, 2010 11:29 PM
Subject: [rebel-builders] trim servo backing plate

Hello all, I hope others are getting Spring fever and getting busy. I am
cutting in my trim tab on the elevator on my rebel kit. I can not find
the
EL-35 backing plate, how thick is the material it is made of ?
yours
kevin623R






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Wayne G. O'Shea

[rebel-builders] trim servo backing plate

Post by Wayne G. O'Shea » Sun Feb 19, 2012 6:15 pm

One that I have, still boxed from MAM, is .050.

Kevin..is the backing plate not in the trim box?? Every kit I've received
had the EL-35 and 36's packed in the servo box.

----- Original Message -----
From: "Jeff Micheal" <westcoastkitplanes@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, March 07, 2010 10:52 PM
Subject: Re: [rebel-builders] trim servo backing plate

Kevin, Backing Plate is made from .063 6061-T6.

Cheers,
Jeff


On Sun, Mar 7, 2010 at 2:33 PM, kevin curtis <kcs1911@yahoo.com> wrote:
great that will ease my mind to know I am useing the right material.
Yours Kevin

--- On Sun, 3/7/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Sunday, March 7, 2010, 11:24 AM


I have a full trim kit in the shop somewhere.. I'll see if the EL-35 is
in
the box/wrap...

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, March 07, 2010 10:47 AM
Subject: Re: [rebel-builders] trim servo backing plate

thanks guys, I will go to the hanger and check to see if I find it in
my
manual this time.
kevin

--- On Sun, 3/7/10, Keith Leitch <im_planecrazy@yahoo.com> wrote:


From: Keith Leitch <im_planecrazy@yahoo.com>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Sunday, March 7, 2010, 8:08 AM


Yep, what Wayne said. I think it says somewhere in the manual that it
is
cut from "stock".
I have my manual here...I'll see if I can find it.
Keith R661

--- On Sat, 3/6/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Saturday, March 6, 2010, 10:47 PM


Pretty sure it's just a square of .032..

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, March 06, 2010 11:29 PM
Subject: [rebel-builders] trim servo backing plate




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
kevin curtis

[rebel-builders] trim servo backing plate

Post by kevin curtis » Sun Feb 19, 2012 6:15 pm

The plate was not in the box. It will be a simple thing to make, just needed to get an idea of
what
Top
Wayne G. O'Shea

[rebel-builders] trim servo backing plate

Post by Wayne G. O'Shea » Sun Feb 19, 2012 6:15 pm

Well.. as stated.. I have one in the box and it's .050"... and I took a mic
out to two airplanes in the hangar this afternoon and they're both the same!

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, March 08, 2010 5:23 PM
Subject: Re: [rebel-builders] trim servo backing plate

The plate was not in the box. It will be a simple thing to make, just
needed to get an idea of
what

--- On Mon, 3/8/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Monday, March 8, 2010, 12:48 PM


One that I have, still boxed from MAM, is .050.

Kevin..is the backing plate not in the trim box?? Every kit I've received
had the EL-35 and 36's packed in the servo box.

----- Original Message -----
From: "Jeff Micheal" <westcoastkitplanes@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, March 07, 2010 10:52 PM
Subject: Re: [rebel-builders] trim servo backing plate

Kevin, Backing Plate is made from .063 6061-T6.

Cheers,
Jeff


On Sun, Mar 7, 2010 at 2:33 PM, kevin curtis <kcs1911@yahoo.com> wrote:
great that will ease my mind to know I am useing the right material.
Yours Kevin

--- On Sun, 3/7/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Sunday, March 7, 2010, 11:24 AM


I have a full trim kit in the shop somewhere.. I'll see if the EL-35 is
in
the box/wrap...

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, March 07, 2010 10:47 AM
Subject: Re: [rebel-builders] trim servo backing plate




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
kevin curtis

[rebel-builders] trim servo backing plate

Post by kevin curtis » Sun Feb 19, 2012 6:15 pm

Top
Jeff Micheal

[rebel-builders] trim servo backing plate

Post by Jeff Micheal » Sun Feb 19, 2012 6:15 pm

Kevin,

FWIW the EL-35 in the Newer kits are made from .063 6061-T6 (older kits .050
like Wayne says). Your a/c, your choice.

Cheers,
Jeff


On Mon, Mar 8, 2010 at 2:49 PM, kevin curtis <kcs1911@yahoo.com> wrote:
Thank you I got you e-mail and right in the middle of my reply I fat
fingered the keyboard and sent half of what I wanted to say. So here goes
again: I will make a plate from .050 stock, which matches what is in
you kit. Thanks agian for the help.
Yours,

--- On Mon, 3/8/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Monday, March 8, 2010, 5:32 PM


Well.. as stated.. I have one in the box and it's .050"... and I took a mic
out to two airplanes in the hangar this afternoon and they're both the
same!

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, March 08, 2010 5:23 PM
Subject: Re: [rebel-builders] trim servo backing plate

The plate was not in the box. It will be a simple thing to make, just
needed to get an idea of
what

--- On Mon, 3/8/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Monday, March 8, 2010, 12:48 PM


One that I have, still boxed from MAM, is .050.

Kevin..is the backing plate not in the trim box?? Every kit I've received
had the EL-35 and 36's packed in the servo box.

----- Original Message -----
From: "Jeff Micheal" <westcoastkitplanes@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, March 07, 2010 10:52 PM
Subject: Re: [rebel-builders] trim servo backing plate

Kevin, Backing Plate is made from .063 6061-T6.

Cheers,
Jeff


On Sun, Mar 7, 2010 at 2:33 PM, kevin curtis <kcs1911@yahoo.com> wrote:
I


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
kevin curtis

[rebel-builders] trim servo backing plate

Post by kevin curtis » Sun Feb 19, 2012 6:15 pm

Thanks Jeff that will be helpful.
Yours, Kevin
--- On Tue, 3/9/10, Jeff Micheal <westcoastkitplanes@gmail.com> wrote:


From: Jeff Micheal <westcoastkitplanes@gmail.com>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Tuesday, March 9, 2010, 1:12 AM


Kevin,

FWIW the EL-35 in the Newer kits are made from .063 6061-T6 (older kits .050
like Wayne says). Your a/c, your choice.

Cheers,
Jeff


On Mon, Mar 8, 2010 at 2:49 PM, kevin curtis <kcs1911@yahoo.com> wrote:

[quote]
Top
Wayne G. O'Shea

[rebel-builders] trim servo backing plate

Post by Wayne G. O'Shea » Sun Feb 19, 2012 6:15 pm

I suspect the .063 is a convenience.. not a necessity. .050 isn't used
anywhere else in the Rebel/Elite or Moose.. so it's an odd ball to stock.
.063 on the other hand... lots of scraps around ! For what it's doing in the
Rebel.. .032 or .040 would be plenty.

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, March 09, 2010 6:17 PM
Subject: Re: [rebel-builders] trim servo backing plate

Thanks Jeff that will be helpful.
Yours, Kevin
--- On Tue, 3/9/10, Jeff Micheal <westcoastkitplanes@gmail.com> wrote:


From: Jeff Micheal <westcoastkitplanes@gmail.com>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Tuesday, March 9, 2010, 1:12 AM


Kevin,

FWIW the EL-35 in the Newer kits are made from .063 6061-T6 (older kits
.050
like Wayne says). Your a/c, your choice.

Cheers,
Jeff


On Mon, Mar 8, 2010 at 2:49 PM, kevin curtis <kcs1911@yahoo.com> wrote:
Thank you I got you e-mail and right in the middle of my reply I fat
fingered the keyboard and sent half of what I wanted to say. So here goes
again: I will make a plate from .050 stock, which matches what is in
you kit. Thanks agian for the help.
Yours,

--- On Mon, 3/8/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Monday, March 8, 2010, 5:32 PM


Well.. as stated.. I have one in the box and it's .050"... and I took a
mic
out to two airplanes in the hangar this afternoon and they're both the
same!

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, March 08, 2010 5:23 PM
Subject: Re: [rebel-builders] trim servo backing plate

The plate was not in the box. It will be a simple thing to make, just
needed to get an idea of
what

--- On Mon, 3/8/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Monday, March 8, 2010, 12:48 PM


One that I have, still boxed from MAM, is .050.

Kevin..is the backing plate not in the trim box?? Every kit I've
received
had the EL-35 and 36's packed in the servo box.

----- Original Message -----
From: "Jeff Micheal" <westcoastkitplanes@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, March 07, 2010 10:52 PM
Subject: Re: [rebel-builders] trim servo backing plate

I



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Jeff Micheal

[rebel-builders] trim servo backing plate

Post by Jeff Micheal » Sun Feb 19, 2012 6:15 pm

If .032 or .040 was good enough from the original .050 then why would MAM
upgrade it to .063 instead of going down in material thickness. Lighter
would be better even if it's just going from .050 to .040, but then I was
told never to downgrade in material thickness either.

Just my insight opinion.

Cheers,
Jeff



On Tue, Mar 9, 2010 at 3:22 PM, Wayne G. O'Shea <oifa@irishfield.on.ca>wrote:
I suspect the .063 is a convenience.. not a necessity. .050 isn't used
anywhere else in the Rebel/Elite or Moose.. so it's an odd ball to stock.
.063 on the other hand... lots of scraps around ! For what it's doing in
the
Rebel.. .032 or .040 would be plenty.

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, March 09, 2010 6:17 PM
Subject: Re: [rebel-builders] trim servo backing plate

Thanks Jeff that will be helpful.
Yours, Kevin
--- On Tue, 3/9/10, Jeff Micheal <westcoastkitplanes@gmail.com> wrote:


From: Jeff Micheal <westcoastkitplanes@gmail.com>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Tuesday, March 9, 2010, 1:12 AM


Kevin,

FWIW the EL-35 in the Newer kits are made from .063 6061-T6 (older kits
.050
like Wayne says). Your a/c, your choice.

Cheers,
Jeff


On Mon, Mar 8, 2010 at 2:49 PM, kevin curtis <kcs1911@yahoo.com> wrote:
Thank you I got you e-mail and right in the middle of my reply I fat
fingered the keyboard and sent half of what I wanted to say. So here
goes
again: I will make a plate from .050 stock, which matches what is in
you kit. Thanks agian for the help.
Yours,

--- On Mon, 3/8/10, Wayne G. O'Shea <oifa@irishfield.on.ca> wrote:


From: Wayne G. O'Shea <oifa@irishfield.on.ca>
Subject: Re: [rebel-builders] trim servo backing plate
To: rebel-builders@dcsol.com
Date: Monday, March 8, 2010, 5:32 PM


Well.. as stated.. I have one in the box and it's .050"... and I took a
mic
out to two airplanes in the hangar this afternoon and they're both the
same!

----- Original Message -----
From: "kevin curtis" <kcs1911@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, March 08, 2010 5:23 PM
Subject: Re: [rebel-builders] trim servo backing plate

wrote:
I


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”