Hi all
I guess I have a problem with my prop and prop flange
Prop says on it to use an6 (3/8) bolts
But when engine was built it had an7 (7/16) lugs installed
So questions is can I change out the lugs for smaller size or does a shop
have to do it, assume they are a press fit, is there special tool to use
besides a sledge hammer
Perhaps wayne you can tell me size for your prop lugs since we have same
engine, except for the 160 hp in mine
Cheers
Mike#007
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions