Moose Flaps

[steveh]

I guess this message is to Al.

We plan on using the teleflex cable for our flap system. What length cable
did you install? About 14' long?

Do you have a part number for it?

We like the idea of eliminating the cable run from the middle of the fus. and
not going thru the roof. We will br putting in a floor in the back for some
extra storage. We ran all the controll cables througt the bulk heads so that
they will be under the new floor.

Thanks
SteveH
Moose 213



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Al Paxhia]

Steve,
The cable I used is about 14'. I can't see the numbers on the cable that is
in the airplane, but the numbers on a longer cable in my shop are "Morse
C301947-3-264in 48411", the 264in is the length of the cable.
Al
----- Original Message -----
----- Original Message -----
From: <steveh@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, February 20, 2005 9:25 AM
Subject: Moose Flaps

I guess this message is to Al.

We plan on using the teleflex cable for our flap system. What length
cable
did you install? About 14' long?

Do you have a part number for it?

We like the idea of eliminating the cable run from the middle of the fus.
and
not going thru the roof. We will br putting in a floor in the back for
some
extra storage. We ran all the controll cables througt the bulk heads so
that
they will be under the new floor.

Thanks
SteveH
Moose 213



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[steveh]

Al,

Do you remember where you ordered the teleflex cable from??
Have been surching the web and non of the suppliers that I tried have any such
part numbers. Any help would be appreciated.

Did you make your own anchor brackets for the end of the cables??

SteveH
Moose 213


-> Steve,
-> The cable I used is about 14'. I can't see the numbers on the cable that is
-> in the airplane, but the numbers on a longer cable in my shop are "Morse
-> C301947-3-264in 48411", the 264in is the length of the cable.
-> Al
-> ----- Original Message -----
-> ----- Original Message -----
-> From: <steveh@dcsol.com>
-> To: <rebel-builders@dcsol.com>
-> Sent: Sunday, February 20, 2005 9:25 AM
-> Subject: Moose Flaps
->
->
-> >I guess this message is to Al.
-> >
-> > We plan on using the teleflex cable for our flap system. What length
-> > cable
-> > did you install? About 14' long?
-> >
-> > Do you have a part number for it?
-> >
-> > We like the idea of eliminating the cable run from the middle of the fus.
-> > and
-> > not going thru the roof. We will br putting in a floor in the back for
-> > some
-> > extra storage. We ran all the controll cables througt the bulk heads so
-> > that
-> > they will be under the new floor.
-> >
-> > Thanks
-> > SteveH
-> > Moose 213
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > username "rebel" password "builder"
-> > Subscription services located at:
-> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
-> >
->
->





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[jtpackard]

SteveH:
I am using a 7' Teleflex cable running up the rear door post. I bought the
Teleflex from <BoatFix.com> I've copied the info below:
Qty Part No Name Options Price Total
1 MOR3019477 7' TYPE 33C SUPREME CABLE TELEFLEX
MECHANICAL: $26.35 $26.35
Regards,
Tom Packard
SR 043



----- Original Message -----
From: <steveh@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 21, 2005 11:03 AM
Subject: Re: Moose Flaps

Al,

Do you remember where you ordered the teleflex cable from??
Have been surching the web and non of the suppliers that I tried have any

such

part numbers. Any help would be appreciated.

Did you make your own anchor brackets for the end of the cables??

SteveH
Moose 213


-> Steve,
-> The cable I used is about 14'. I can't see the numbers on the cable

that is

-> in the airplane, but the numbers on a longer cable in my shop are

"Morse

-> C301947-3-264in 48411", the 264in is the length of the cable.
-> Al
-> ----- Original Message -----
-> ----- Original Message -----
-> From: <steveh@dcsol.com>
-> To: <rebel-builders@dcsol.com>
-> Sent: Sunday, February 20, 2005 9:25 AM
-> Subject: Moose Flaps
->
->
-> >I guess this message is to Al.
-> >
-> > We plan on using the teleflex cable for our flap system. What length
-> > cable
-> > did you install? About 14' long?
-> >
-> > Do you have a part number for it?
-> >
-> > We like the idea of eliminating the cable run from the middle of the

fus.

-> > and
-> > not going thru the roof. We will br putting in a floor in the back

for

-> > some
-> > extra storage. We ran all the controll cables througt the bulk heads

so

-> > that
-> > they will be under the new floor.
-> >
-> > Thanks
-> > SteveH
-> > Moose 213
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > username "rebel" password "builder"
-> > Subscription services located at:
-> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
-> >
->
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[steveh]

Thanks for the info. Will check it out.

-> SteveH:
-> I am using a 7' Teleflex cable running up the rear door post. I bought the
-> Teleflex from <BoatFix.com> I've copied the info below:
-> Qty Part No Name Options Price Total
-> 1 MOR3019477 7' TYPE 33C SUPREME CABLE TELEFLEX
-> MECHANICAL: $26.35 $26.35
-> Regards,
-> Tom Packard
-> SR 043
->
->
->
-> ----- Original Message -----
-> From: <steveh@dcsol.com>
-> To: <rebel-builders@dcsol.com>
-> Sent: Monday, February 21, 2005 11:03 AM
-> Subject: Re: Moose Flaps
->
->
-> > Al,
-> >
-> > Do you remember where you ordered the teleflex cable from??
-> > Have been surching the web and non of the suppliers that I tried have any
-> such
-> > part numbers. Any help would be appreciated.
-> >
-> > Did you make your own anchor brackets for the end of the cables??
-> >
-> > SteveH
-> > Moose 213
-> >
-> >
-> > -> Steve,
-> > -> The cable I used is about 14'. I can't see the numbers on the cable
-> that is
-> > -> in the airplane, but the numbers on a longer cable in my shop are
-> "Morse
-> > -> C301947-3-264in 48411", the 264in is the length of the cable.
-> > -> Al
-> > -> ----- Original Message -----
-> > -> ----- Original Message -----
-> > -> From: <steveh@dcsol.com>
-> > -> To: <rebel-builders@dcsol.com>
-> > -> Sent: Sunday, February 20, 2005 9:25 AM
-> > -> Subject: Moose Flaps
-> > ->
-> > ->
-> > -> >I guess this message is to Al.
-> > -> >
-> > -> > We plan on using the teleflex cable for our flap system. What length
-> > -> > cable
-> > -> > did you install? About 14' long?
-> > -> >
-> > -> > Do you have a part number for it?
-> > -> >
-> > -> > We like the idea of eliminating the cable run from the middle of the
-> fus.
-> > -> > and
-> > -> > not going thru the roof. We will br putting in a floor in the back
-> for
-> > -> > some
-> > -> > extra storage. We ran all the controll cables througt the bulk heads
-> so
-> > -> > that
-> > -> > they will be under the new floor.
-> > -> >
-> > -> > Thanks
-> > -> > SteveH
-> > -> > Moose 213
-> > -> >
-> > -> >
-> > -> >
-> > -> > -----------------------------------------------------------------
-> > -> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > -> > username "rebel" password "builder"
-> > -> > Subscription services located at:
-> > -> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > -> > List administrator: mike.davis@dcsol.com
-> > -> > -----------------------------------------------------------------
-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> > ->
-> > ->
-> >
-> >
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > username "rebel" password "builder"
-> > Subscription services located at:
-> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
->
->
->
-> --- http://USFamily.Net/dialup.html - $8.25/mo! --
http://www.usfamily.net/dsl.html - $19.99/mo! ---
->





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Al Paxhia]

Steve,
I have no source for the cables, my son gave me the ones that I have. They
came out of a new boat, I don't remember the reason something like different
engine different controls. The brackets that attach the cable sleeve to the
airplane came from Doc Freeman's Marine Supply in Seattle. Boat Fix should
have all the same stuff and the prices look very competitive.
Al
----- Original Message -----
From: <steveh@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 21, 2005 10:33 AM
Subject: Re: Moose Flaps

Thanks for the info. Will check it out.

-> SteveH:
-> I am using a 7' Teleflex cable running up the rear door post. I bought
the
-> Teleflex from <BoatFix.com> I've copied the info below:
-> Qty Part No Name Options Price Total
-> 1 MOR3019477 7' TYPE 33C SUPREME CABLE TELEFLEX
-> MECHANICAL: $26.35 $26.35
-> Regards,
-> Tom Packard
-> SR 043
->
->
->
-> ----- Original Message -----
-> From: <steveh@dcsol.com>
-> To: <rebel-builders@dcsol.com>
-> Sent: Monday, February 21, 2005 11:03 AM
-> Subject: Re: Moose Flaps
->
->
-> > Al,
-> >
-> > Do you remember where you ordered the teleflex cable from??
-> > Have been surching the web and non of the suppliers that I tried have
any
-> such
-> > part numbers. Any help would be appreciated.
-> >
-> > Did you make your own anchor brackets for the end of the cables??
-> >
-> > SteveH
-> > Moose 213
-> >
-> >
-> > -> Steve,
-> > -> The cable I used is about 14'. I can't see the numbers on the
cable
-> that is
-> > -> in the airplane, but the numbers on a longer cable in my shop are
-> "Morse
-> > -> C301947-3-264in 48411", the 264in is the length of the cable.
-> > -> Al
-> > -> ----- Original Message -----
-> > -> ----- Original Message -----
-> > -> From: <steveh@dcsol.com>
-> > -> To: <rebel-builders@dcsol.com>
-> > -> Sent: Sunday, February 20, 2005 9:25 AM
-> > -> Subject: Moose Flaps
-> > ->
-> > ->
-> > -> >I guess this message is to Al.
-> > -> >
-> > -> > We plan on using the teleflex cable for our flap system. What
length
-> > -> > cable
-> > -> > did you install? About 14' long?
-> > -> >
-> > -> > Do you have a part number for it?
-> > -> >
-> > -> > We like the idea of eliminating the cable run from the middle of
the
-> fus.
-> > -> > and
-> > -> > not going thru the roof. We will br putting in a floor in the
back
-> for
-> > -> > some
-> > -> > extra storage. We ran all the controll cables througt the bulk
heads
-> so
-> > -> > that
-> > -> > they will be under the new floor.
-> > -> >
-> > -> > Thanks
-> > -> > SteveH
-> > -> > Moose 213
-> > -> >
-> > -> >
-> > -> >
-> > ->

-----------------------------------------------------------------

-> > -> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > -> > username "rebel" password "builder"
-> > -> > Subscription services located at:
-> > -> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > -> > List administrator: mike.davis@dcsol.com
-> > ->

-----------------------------------------------------------------

-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> > ->
-> > ->
-> >
-> >
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > username "rebel" password "builder"
-> > Subscription services located at:
-> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
->
->
->
-> --- http://USFamily.Net/dialup.html - $8.25/mo! --
http://www.usfamily.net/dsl.html - $19.99/mo! ---
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[steveh]

Thanks Al! !

SteveH

-> Steve,
-> I have no source for the cables, my son gave me the ones that I have. They
-> came out of a new boat, I don't remember the reason something like
different
-> engine different controls. The brackets that attach the cable sleeve to the
-> airplane came from Doc Freeman's Marine Supply in Seattle. Boat Fix
should
-> have all the same stuff and the prices look very competitive.
-> Al
-> ----- Original Message -----
-> From: <steveh@dcsol.com>
-> To: <rebel-builders@dcsol.com>
-> Sent: Monday, February 21, 2005 10:33 AM
-> Subject: Re: Moose Flaps
->
->
-> > Thanks for the info. Will check it out.
-> >
-> > -> SteveH:
-> > -> I am using a 7' Teleflex cable running up the rear door post. I bought
-> > the
-> > -> Teleflex from <BoatFix.com> I've copied the info below:
-> > -> Qty Part No Name Options Price Total
-> > -> 1 MOR3019477 7' TYPE 33C SUPREME CABLE TELEFLEX
-> > -> MECHANICAL: $26.35 $26.35
-> > -> Regards,
-> > -> Tom Packard
-> > -> SR 043
-> > ->
-> > ->
-> > ->
-> > -> ----- Original Message -----
-> > -> From: <steveh@dcsol.com>
-> > -> To: <rebel-builders@dcsol.com>
-> > -> Sent: Monday, February 21, 2005 11:03 AM
-> > -> Subject: Re: Moose Flaps
-> > ->
-> > ->
-> > -> > Al,
-> > -> >
-> > -> > Do you remember where you ordered the teleflex cable from??
-> > -> > Have been surching the web and non of the suppliers that I tried
have
-> > any
-> > -> such
-> > -> > part numbers. Any help would be appreciated.
-> > -> >
-> > -> > Did you make your own anchor brackets for the end of the cables??
-> > -> >
-> > -> > SteveH
-> > -> > Moose 213
-> > -> >
-> > -> >
-> > -> > -> Steve,
-> > -> > -> The cable I used is about 14'. I can't see the numbers on the
-> > cable
-> > -> that is
-> > -> > -> in the airplane, but the numbers on a longer cable in my shop are
-> > -> "Morse
-> > -> > -> C301947-3-264in 48411", the 264in is the length of the cable.
-> > -> > -> Al
-> > -> > -> ----- Original Message -----
-> > -> > -> ----- Original Message -----
-> > -> > -> From: <steveh@dcsol.com>
-> > -> > -> To: <rebel-builders@dcsol.com>
-> > -> > -> Sent: Sunday, February 20, 2005 9:25 AM
-> > -> > -> Subject: Moose Flaps
-> > -> > ->
-> > -> > ->
-> > -> > -> >I guess this message is to Al.
-> > -> > -> >
-> > -> > -> > We plan on using the teleflex cable for our flap system. What
-> > length
-> > -> > -> > cable
-> > -> > -> > did you install? About 14' long?
-> > -> > -> >
-> > -> > -> > Do you have a part number for it?
-> > -> > -> >
-> > -> > -> > We like the idea of eliminating the cable run from the middle
of
-> > the
-> > -> fus.
-> > -> > -> > and
-> > -> > -> > not going thru the roof. We will br putting in a floor in the
-> > back
-> > -> for
-> > -> > -> > some
-> > -> > -> > extra storage. We ran all the controll cables througt the bulk
-> > heads
-> > -> so
-> > -> > -> > that
-> > -> > -> > they will be under the new floor.
-> > -> > -> >
-> > -> > -> > Thanks
-> > -> > -> > SteveH
-> > -> > -> > Moose 213
-> > -> > -> >
-> > -> > -> >
-> > -> > -> >
-> > -> > ->
-> > > -----------------------------------------------------------------
-> > -> > -> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > -> > -> > username "rebel" password "builder"
-> > -> > -> > Subscription services located at:
-> > -> > -> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > -> > -> > List administrator: mike.davis@dcsol.com
-> > -> > ->
-> > > -----------------------------------------------------------------
-> > -> > -> >
-> > -> > -> >
-> > -> > -> >
-> > -> > -> >
-> > -> > ->
-> > -> > ->
-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> > -> > -----------------------------------------------------------------
-> > -> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > -> > username "rebel" password "builder"
-> > -> > Subscription services located at:
-> > -> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > -> > List administrator: mike.davis@dcsol.com
-> > -> > -----------------------------------------------------------------
-> > -> >
-> > -> >
-> > -> >
-> > ->
-> > ->
-> > ->
-> > -> --- http://USFamily.Net/dialup.html - $8.25/mo! --
-> > http://www.usfamily.net/dsl.html - $19.99/mo! ---
-> > ->
-> >
-> >
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > username "rebel" password "builder"
-> > Subscription services located at:
-> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
->
->





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Dale Fultz]

Hi Al, How much movement is there at the rod that attaches to your flap
rod at the top off the bellcrank( how much does the round rod move in inches
from zero degrees to full flaps) I have some ideas for it but need know
about how far it moves. I don't have my wings installed yet to get a
measurement. If you don't understand what I mean e-mail me and I will try
to explain what I need. Thanks Dale 033SR-Moose
----- Original Message -----
From: <steveh@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 21, 2005 3:39 PM
Subject: Re: Moose Flaps

Thanks Al! !

SteveH

-> Steve,
-> I have no source for the cables, my son gave me the ones that I have.

They

-> came out of a new boat, I don't remember the reason something like
different
-> engine different controls. The brackets that attach the cable sleeve to

the

-> airplane came from Doc Freeman's Marine Supply in Seattle. Boat Fix
should
-> have all the same stuff and the prices look very competitive.
-> Al
-> ----- Original Message -----
-> From: <steveh@dcsol.com>
-> To: <rebel-builders@dcsol.com>
-> Sent: Monday, February 21, 2005 10:33 AM
-> Subject: Re: Moose Flaps
->
->
-> > Thanks for the info. Will check it out.
-> >
-> > -> SteveH:
-> > -> I am using a 7' Teleflex cable running up the rear door post. I

bought

-> > the
-> > -> Teleflex from <BoatFix.com> I've copied the info below:
-> > -> Qty Part No Name Options Price Total
-> > -> 1 MOR3019477 7' TYPE 33C SUPREME CABLE TELEFLEX
-> > -> MECHANICAL: $26.35 $26.35
-> > -> Regards,
-> > -> Tom Packard
-> > -> SR 043
-> > ->
-> > ->
-> > ->
-> > -> ----- Original Message -----
-> > -> From: <steveh@dcsol.com>
-> > -> To: <rebel-builders@dcsol.com>
-> > -> Sent: Monday, February 21, 2005 11:03 AM
-> > -> Subject: Re: Moose Flaps
-> > ->
-> > ->
-> > -> > Al,
-> > -> >
-> > -> > Do you remember where you ordered the teleflex cable from??
-> > -> > Have been surching the web and non of the suppliers that I tried
have
-> > any
-> > -> such
-> > -> > part numbers. Any help would be appreciated.
-> > -> >
-> > -> > Did you make your own anchor brackets for the end of the

cables??

-> > -> >
-> > -> > SteveH
-> > -> > Moose 213
-> > -> >
-> > -> >
-> > -> > -> Steve,
-> > -> > -> The cable I used is about 14'. I can't see the numbers on the
-> > cable
-> > -> that is
-> > -> > -> in the airplane, but the numbers on a longer cable in my shop

are

-> > -> "Morse
-> > -> > -> C301947-3-264in 48411", the 264in is the length of the

cable.

-> > -> > -> Al
-> > -> > -> ----- Original Message -----
-> > -> > -> ----- Original Message -----
-> > -> > -> From: <steveh@dcsol.com>
-> > -> > -> To: <rebel-builders@dcsol.com>
-> > -> > -> Sent: Sunday, February 20, 2005 9:25 AM
-> > -> > -> Subject: Moose Flaps
-> > -> > ->
-> > -> > ->
-> > -> > -> >I guess this message is to Al.
-> > -> > -> >
-> > -> > -> > We plan on using the teleflex cable for our flap system.

What

-> > length
-> > -> > -> > cable
-> > -> > -> > did you install? About 14' long?
-> > -> > -> >
-> > -> > -> > Do you have a part number for it?
-> > -> > -> >
-> > -> > -> > We like the idea of eliminating the cable run from the

middle

of
-> > the
-> > -> fus.
-> > -> > -> > and
-> > -> > -> > not going thru the roof. We will br putting in a floor in

the

-> > back
-> > -> for
-> > -> > -> > some
-> > -> > -> > extra storage. We ran all the controll cables througt the

bulk

-> > heads
-> > -> so
-> > -> > -> > that
-> > -> > -> > they will be under the new floor.
-> > -> > -> >
-> > -> > -> > Thanks
-> > -> > -> > SteveH
-> > -> > -> > Moose 213
-> > -> > -> >
-> > -> > -> >
-> > -> > -> >
-> > -> > ->
-> > > -----------------------------------------------------------------
-> > -> > -> > List archives located at:

https://www.dcsol.com/login?mode=HTML

-> > -> > -> > username "rebel" password "builder"
-> > -> > -> > Subscription services located at:
-> > -> > -> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > -> > -> > List administrator: mike.davis@dcsol.com
-> > -> > ->
-> > > -----------------------------------------------------------------
-> > -> > -> >
-> > -> > -> >
-> > -> > -> >
-> > -> > -> >
-> > -> > ->
-> > -> > ->
-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> > ->
-----------------------------------------------------------------
-> > -> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > -> > username "rebel" password "builder"
-> > -> > Subscription services located at:
-> > -> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > -> > List administrator: mike.davis@dcsol.com
-> > ->
-----------------------------------------------------------------
-> > -> >
-> > -> >
-> > -> >
-> > ->
-> > ->
-> > ->
-> > -> --- http://USFamily.Net/dialup.html - $8.25/mo! --
-> > http://www.usfamily.net/dsl.html - $19.99/mo! ---
-> > ->
-> >
-> >
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > username "rebel" password "builder"
-> > Subscription services located at:
-> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
->
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.2.0 - Release Date: 2/21/05

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.2.0 - Release Date: 2/21/05




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Al Paxhia]

Dale,
The exact measurement is buried under headliner and floor so I don't know
off hand, it is the same as MAM's design. If you measure at the Johnson bar
you should get the answer. I tried to keep the movements the same at the
bellcrank as the movement on the Johnson bar, the bellcrank only changes the
direction of the action. I wanted pull on the cable to deploy flaps and push
to retract them. The air loads and spring help retract.
Al
----- Original Message -----
From: "Dale Fultz" <dfultz17086@earthlink.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 21, 2005 9:26 PM
Subject: Re: Moose Flaps

Hi Al, How much movement is there at the rod that attaches to your flap
rod at the top off the bellcrank( how much does the round rod move in
inches
from zero degrees to full flaps) I have some ideas for it but need know
about how far it moves. I don't have my wings installed yet to get a
measurement. If you don't understand what I mean e-mail me and I will
try
to explain what I need. Thanks Dale 033SR-Moose
----- Original Message -----
From: <steveh@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 21, 2005 3:39 PM
Subject: Re: Moose Flaps

Thanks Al! !

SteveH

-> Steve,
-> I have no source for the cables, my son gave me the ones that I have.

They

-> came out of a new boat, I don't remember the reason something like
different
-> engine different controls. The brackets that attach the cable sleeve
to

the

-> airplane came from Doc Freeman's Marine Supply in Seattle. Boat Fix
should
-> have all the same stuff and the prices look very competitive.
-> Al
-> ----- Original Message -----
-> From: <steveh@dcsol.com>
-> To: <rebel-builders@dcsol.com>
-> Sent: Monday, February 21, 2005 10:33 AM
-> Subject: Re: Moose Flaps
->
->
-> > Thanks for the info. Will check it out.
-> >
-> > -> SteveH:
-> > -> I am using a 7' Teleflex cable running up the rear door post. I

bought

-> > the
-> > -> Teleflex from <BoatFix.com> I've copied the info below:
-> > -> Qty Part No Name Options Price Total
-> > -> 1 MOR3019477 7' TYPE 33C SUPREME CABLE TELEFLEX
-> > -> MECHANICAL: $26.35 $26.35
-> > -> Regards,
-> > -> Tom Packard
-> > -> SR 043
-> > ->
-> > ->
-> > ->
-> > -> ----- Original Message -----
-> > -> From: <steveh@dcsol.com>
-> > -> To: <rebel-builders@dcsol.com>
-> > -> Sent: Monday, February 21, 2005 11:03 AM
-> > -> Subject: Re: Moose Flaps
-> > ->
-> > ->
-> > -> > Al,
-> > -> >
-> > -> > Do you remember where you ordered the teleflex cable from??
-> > -> > Have been surching the web and non of the suppliers that I
tried
have
-> > any
-> > -> such
-> > -> > part numbers. Any help would be appreciated.
-> > -> >
-> > -> > Did you make your own anchor brackets for the end of the

cables??

-> > -> >
-> > -> > SteveH
-> > -> > Moose 213
-> > -> >
-> > -> >
-> > -> > -> Steve,
-> > -> > -> The cable I used is about 14'. I can't see the numbers on
the
-> > cable
-> > -> that is
-> > -> > -> in the airplane, but the numbers on a longer cable in my
shop

are

-> > -> "Morse
-> > -> > -> C301947-3-264in 48411", the 264in is the length of the

cable.

-> > -> > -> Al
-> > -> > -> ----- Original Message -----
-> > -> > -> ----- Original Message -----
-> > -> > -> From: <steveh@dcsol.com>
-> > -> > -> To: <rebel-builders@dcsol.com>
-> > -> > -> Sent: Sunday, February 20, 2005 9:25 AM
-> > -> > -> Subject: Moose Flaps
-> > -> > ->
-> > -> > ->
-> > -> > -> >I guess this message is to Al.
-> > -> > -> >
-> > -> > -> > We plan on using the teleflex cable for our flap system.

What

-> > length
-> > -> > -> > cable
-> > -> > -> > did you install? About 14' long?
-> > -> > -> >
-> > -> > -> > Do you have a part number for it?
-> > -> > -> >
-> > -> > -> > We like the idea of eliminating the cable run from the

middle

of
-> > the
-> > -> fus.
-> > -> > -> > and
-> > -> > -> > not going thru the roof. We will br putting in a floor in

the

-> > back
-> > -> for
-> > -> > -> > some
-> > -> > -> > extra storage. We ran all the controll cables througt the

bulk

-> > heads
-> > -> so
-> > -> > -> > that
-> > -> > -> > they will be under the new floor.
-> > -> > -> >
-> > -> > -> > Thanks
-> > -> > -> > SteveH
-> > -> > -> > Moose 213
-> > -> > -> >
-> > -> > -> >
-> > -> > -> >
-> > -> > ->
-> > > -----------------------------------------------------------------
-> > -> > -> > List archives located at:

https://www.dcsol.com/login?mode=HTML

-> > -> > -> > username "rebel" password "builder"
-> > -> > -> > Subscription services located at:
-> > -> > -> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > -> > -> > List administrator: mike.davis@dcsol.com
-> > -> > ->
-> > > -----------------------------------------------------------------
-> > -> > -> >
-> > -> > -> >
-> > -> > -> >
-> > -> > -> >
-> > -> > ->
-> > -> > ->
-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> > -> >
-> > ->
-----------------------------------------------------------------
-> > -> > List archives located at:
https://www.dcsol.com/login?mode=HTML
-> > -> > username "rebel" password "builder"
-> > -> > Subscription services located at:
-> > -> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > -> > List administrator: mike.davis@dcsol.com
-> > ->
-----------------------------------------------------------------
-> > -> >
-> > -> >
-> > -> >
-> > ->
-> > ->
-> > ->
-> > -> --- http://USFamily.Net/dialup.html - $8.25/mo! --
-> > http://www.usfamily.net/dsl.html - $19.99/mo! ---
-> > ->
-> >
-> >
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > username "rebel" password "builder"
-> > Subscription services located at:
-> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
->
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.2.0 - Release Date: 2/21/05

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.2.0 - Release Date: 2/21/05




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Kelly M. Ewing]

When the flaps of the moose are installed is the aft 2/3rds up 5 degrees? And forward section of the flaps level with the bottom of the wings?

Thanks
Kelly
Moose
kelly@tru-form.ca
Enjoy your day !




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Kelly M. Ewing]

It looks like all I had to do is adjust the CC149 centre arm. Works great and the numbers ( degrees ) are perfect.


Thanks
All

Kelly
Moose
kelly@tru-form.ca
Enjoy your day !




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------