Roger,
Are you looking merely to seal your windshield to the frame/cabin or are you
trying to do something else?
After I had trimmed and fit my windshield for probably the 10th time, I used
"Bostick 1100" that I purchased from LP Aero to set it in place. Then, per
the manual, I layed up multiple sets of fiberglass cloth and endless
filler/sanding for the final installation process.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
rogerk@dcsol.com
Sent: Sunday, December 06, 2009 11:05 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Moose WindShield Surround
Hello Moosers
Can anyone advise on the best type of resin to use for the windshield
surround?
Should it be epoxy or one of the esters? or does it matter?
Roger K
SR210
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
[rebel-builders] Moose WindShield Surround
[rebel-builders] Moose WindShield Surround
Roger (and other windshield retainer builders):
I'm no expert on fiberglass, but I did talk to many folks who are. I used a
"Laminating Resin" for all my fiberglass work. AFAIK, it worked fine
<grin>. Everything is still in one piece and still on the Moose anyway!
Ted
-----Original Message-----
From: roger@proteus.com.au [mailto:roger@proteus.com.au]
Sent: Saturday, December 12, 2009 12:48 PM
To: ted@vafm.org
Cc: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Moose WindShield Surround
hi Ted
It's the making of the actual surround (fibre glass layers) that I'm
doing. I didn't get any resin with the kit so I need to buy some and
my choices are either an epoxy or polyester and I'm not sure if one
is better than the other.
Thanks for the tip on the Bostick, that will be the next thing for me
once the frame is made.
Roger K
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I'm no expert on fiberglass, but I did talk to many folks who are. I used a
"Laminating Resin" for all my fiberglass work. AFAIK, it worked fine
<grin>. Everything is still in one piece and still on the Moose anyway!
Ted
-----Original Message-----
From: roger@proteus.com.au [mailto:roger@proteus.com.au]
Sent: Saturday, December 12, 2009 12:48 PM
To: ted@vafm.org
Cc: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Moose WindShield Surround
hi Ted
It's the making of the actual surround (fibre glass layers) that I'm
doing. I didn't get any resin with the kit so I need to buy some and
my choices are either an epoxy or polyester and I'm not sure if one
is better than the other.
Thanks for the tip on the Bostick, that will be the next thing for me
once the frame is made.
Roger K
youRoger,
Are you looking merely to seal your windshield to the frame/cabin or are
usedtrying to do something else?
After I had trimmed and fit my windshield for probably the 10th time, I
"Bostick 1100" that I purchased from LP Aero to set it in place. Then, per
the manual, I layed up multiple sets of fiberglass cloth and endless
filler/sanding for the final installation process.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
rogerk@dcsol.com
Sent: Sunday, December 06, 2009 11:05 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Moose WindShield Surround
Hello Moosers
Can anyone advise on the best type of resin to use for the windshield
surround?
Should it be epoxy or one of the esters? or does it matter?
Roger K
SR210
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Moose WindShield Surround
Roger,
To answer your question, to use epoxy or polyester resin? This link will
most likely answer your question and provide some other information you may
not have thought of.
http://www.google.ca/url?sa=t&source=we ... 7Qej4oDx6g
Cheers,
Jeff
On Sat, Dec 12, 2009 at 4:07 PM, Ted Waltman <ted@vafm.org> wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
To answer your question, to use epoxy or polyester resin? This link will
most likely answer your question and provide some other information you may
not have thought of.
http://www.google.ca/url?sa=t&source=we ... 7Qej4oDx6g
Cheers,
Jeff
On Sat, Dec 12, 2009 at 4:07 PM, Ted Waltman <ted@vafm.org> wrote:
Roger (and other windshield retainer builders):
I'm no expert on fiberglass, but I did talk to many folks who are. I used
a
"Laminating Resin" for all my fiberglass work. AFAIK, it worked fine
<grin>. Everything is still in one piece and still on the Moose anyway!
Ted
-----Original Message-----
From: roger@proteus.com.au [mailto:roger@proteus.com.au]
Sent: Saturday, December 12, 2009 12:48 PM
To: ted@vafm.org
Cc: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Moose WindShield Surround
hi Ted
It's the making of the actual surround (fibre glass layers) that I'm
doing. I didn't get any resin with the kit so I need to buy some and
my choices are either an epoxy or polyester and I'm not sure if one
is better than the other.
Thanks for the tip on the Bostick, that will be the next thing for me
once the frame is made.
Roger K
youRoger,
Are you looking merely to seal your windshield to the frame/cabin or areusedtrying to do something else?
After I had trimmed and fit my windshield for probably the 10th time, Iper"Bostick 1100" that I purchased from LP Aero to set it in place. Then,the manual, I layed up multiple sets of fiberglass cloth and endless
filler/sanding for the final installation process.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
rogerk@dcsol.com
Sent: Sunday, December 06, 2009 11:05 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Moose WindShield Surround
Hello Moosers
Can anyone advise on the best type of resin to use for the windshield
surround?
Should it be epoxy or one of the esters? or does it matter?
Roger K
SR210
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Moose WindShield Surround
No expert either but the common polyester resin worked just fine for me.
Ken
Ted Waltman wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Ken
Ted Waltman wrote:
Roger (and other windshield retainer builders):
I'm no expert on fiberglass, but I did talk to many folks who are. I used a
"Laminating Resin" for all my fiberglass work. AFAIK, it worked fine
<grin>. Everything is still in one piece and still on the Moose anyway!
Ted
-----Original Message-----
From: roger@proteus.com.au [mailto:roger@proteus.com.au]
Sent: Saturday, December 12, 2009 12:48 PM
To: ted@vafm.org
Cc: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Moose WindShield Surround
hi Ted
It's the making of the actual surround (fibre glass layers) that I'm
doing. I didn't get any resin with the kit so I need to buy some and
my choices are either an epoxy or polyester and I'm not sure if one
is better than the other.
Thanks for the tip on the Bostick, that will be the next thing for me
once the frame is made.
Roger K
youRoger,
Are you looking merely to seal your windshield to the frame/cabin or areusedtrying to do something else?
After I had trimmed and fit my windshield for probably the 10th time, I"Bostick 1100" that I purchased from LP Aero to set it in place. Then, per
the manual, I layed up multiple sets of fiberglass cloth and endless
filler/sanding for the final installation process.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
rogerk@dcsol.com
Sent: Sunday, December 06, 2009 11:05 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Moose WindShield Surround
Hello Moosers
Can anyone advise on the best type of resin to use for the windshield
surround?
Should it be epoxy or one of the esters? or does it matter?
Roger K
SR210
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Moose WindShield Surround
Hey folks,
New here, been reading the posts for a while.
I just completed my Moose, SR169, this year, first flight in April.
For the windshield installation, I used a big bead of proseal to seat the windshield in place. For the retainer, I used bdirectional cloth with West Systems epoxy resin. I put down several layers of cloth and installed some CS rivets (widely spaced) through the retainer into the metal. Then I put down several more layers of cloth on top of that to finish it. For the left and right vertical sides of the windshield, I made aluminum retainers, riveted the retainers to the skin, and blended them in with a resin mix. This worked very well for me.
Darryl
________________________________
From: Ted Waltman <ted@vafm.org>
To: rebel-builders@dcsol.com
Cc: rebel-builders@dcsol.com
Sent: Sat, December 12, 2009 7:07:36 PM
Subject: RE: [rebel-builders] Moose WindShield Surround
Roger (and other windshield retainer builders):
I'm no expert on fiberglass, but I did talk to many folks who are. I used a
"Laminating Resin" for all my fiberglass work. AFAIK, it worked fine
<grin>. Everything is still in one piece and still on the Moose anyway!
Ted
-----Original Message-----
From: roger@proteus.com.au [mailto:roger@proteus.com.au]
Sent: Saturday, December 12, 2009 12:48 PM
To: ted@vafm.org
Cc: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Moose WindShield Surround
hi Ted
It's the making of the actual surround (fibre glass layers) that I'm
doing. I didn't get any resin with the kit so I need to buy some and
my choices are either an epoxy or polyester and I'm not sure if one
is better than the other.
Thanks for the tip on the Bostick, that will be the next thing for me
once the frame is made.
Roger K
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
New here, been reading the posts for a while.
I just completed my Moose, SR169, this year, first flight in April.
For the windshield installation, I used a big bead of proseal to seat the windshield in place. For the retainer, I used bdirectional cloth with West Systems epoxy resin. I put down several layers of cloth and installed some CS rivets (widely spaced) through the retainer into the metal. Then I put down several more layers of cloth on top of that to finish it. For the left and right vertical sides of the windshield, I made aluminum retainers, riveted the retainers to the skin, and blended them in with a resin mix. This worked very well for me.
Darryl
________________________________
From: Ted Waltman <ted@vafm.org>
To: rebel-builders@dcsol.com
Cc: rebel-builders@dcsol.com
Sent: Sat, December 12, 2009 7:07:36 PM
Subject: RE: [rebel-builders] Moose WindShield Surround
Roger (and other windshield retainer builders):
I'm no expert on fiberglass, but I did talk to many folks who are. I used a
"Laminating Resin" for all my fiberglass work. AFAIK, it worked fine
<grin>. Everything is still in one piece and still on the Moose anyway!
Ted
-----Original Message-----
From: roger@proteus.com.au [mailto:roger@proteus.com.au]
Sent: Saturday, December 12, 2009 12:48 PM
To: ted@vafm.org
Cc: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Moose WindShield Surround
hi Ted
It's the making of the actual surround (fibre glass layers) that I'm
doing. I didn't get any resin with the kit so I need to buy some and
my choices are either an epoxy or polyester and I'm not sure if one
is better than the other.
Thanks for the tip on the Bostick, that will be the next thing for me
once the frame is made.
Roger K
youRoger,
Are you looking merely to seal your windshield to the frame/cabin or are
usedtrying to do something else?
After I had trimmed and fit my windshield for probably the 10th time, I
"Bostick 1100" that I purchased from LP Aero to set it in place. Then, per
the manual, I layed up multiple sets of fiberglass cloth and endless
filler/sanding for the final installation process.
Ted
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
rogerk@dcsol.com
Sent: Sunday, December 06, 2009 11:05 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Moose WindShield Surround
Hello Moosers
Can anyone advise on the best type of resin to use for the windshield
surround?
Should it be epoxy or one of the esters? or does it matter?
Roger K
SR210
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------