It comes off no problem. I had to reglass some of it because the gelcoat
cracked. The factory fiberglass work won't win any prizes!
Jeffrey Steenson
E714
----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Friday, August 18, 2006 7:13 PM
Subject: [rebel-builders] Elite
Hi group,
I recently bought the tail fairing after my own attempt failed. I just
couldn't make it smooth enough, I knew there was a reason I built a metal
plane! The purchased fairing came in 2 pieces, a RS and LS. I am told to
glass the halves together. Does it come off ok as a 1 piece item? Looks
like you may have to fight the flare of the tail cone as you pull it
forward and then off.
I also installed the ground handler kit, it sure is a nice piece and good
idea.
Mike Betti
771E
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------