safety issue would not be written in the official manual or adopted as a
change because the original method is acceptable. I was urged by Murphy
staff to modify the horizontal stab and elevator and did so via a verbal
description before seeing examples on Mike Davis's site. The reason I
was given and backed up by more than one pilot with experience on the
Elite is that the original design was too sensitive. I think I can see
more than one reason why that would be but it made sense to me to follow
the advise. Except, I didn't round the tips of the spade because it
wasn't stressed to do so, only that /some /builders also rounded the
spade tips.
I think that everyone should give due regard to the expertise of the
people who designed and test flew this airplane before making /any/ mods
that are not listed by MAM. However, I have modified our Elite because I
am allowed to in the rules, I build to a recognized standard and I think
it will work. I don't agree with every mod I have seen and a few seem a
bit loony. ( and maybe me!)
The elevator spade mod sounds like it would make the airplane more
comfortable for the average person to fly and a little less likely to
over stress it in some situations. I am not sure if there is any reason
to change the rudder.
However, that is just my best guess.
Bob
773E
flex@dcsol.com wrote:
Michelle and I just finished the horizontal stabilizer today. Getting ready to
move on to the elevator, and back to the rudder for tip mod.
Anyhow, I've gotten lots of advice on the in's and out's of the Elite tail design
and elevator/rudder tip mods. Based on what seems like an overly-sensisitve
nature of the tail control surfaces, it sounds like these are "must-do" mods.
My question is: if so many people have chosen to do these "highly
encouraged" mods, why hasn't Murphy issued any guidance on the subject
(economy and personnel issues aside... this has been a topic of discussion for
years from what I can tell)?
Is there anybody out there that has elected NOT to down-size/re-shape their
tip spades? My apologies if this topic has been beat to death, but I did a
search and it didn't come up with much other than lots of great pictures and
how-to guides... all of which are great, just looking for more discussion.
Thanks!
Kory "Flex" Klismith
678E
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.423 / Virus Database: 270.14.31/2458 - Release Date: 10/25/09 08:10:00
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------