Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] Teleflex Cable

Converted from Wildcat! database. (read only)
craig

[rebel-builders] Teleflex Cable

Post by craig » Sun Feb 19, 2012 5:37 pm

Hi Charlie,

My teleflex is 72 1/4". The one that came with the split flaps kit is I was
trying to sell is 66 1/4". They must have given you the wrong one. That's
no good. Sorry for that bit of bad news. CW




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Ron Shannon

[rebel-builders] Teleflex Cable

Post by Ron Shannon » Sun Feb 19, 2012 5:37 pm

Charlie,

I have a longer Teleflex I'm not going to use because I built an electric
actuator system. Contact me direct if you want it for peanuts, or less. :-)

Ron
254R


On Tue, Oct 6, 2009 at 3:42 PM, Charlie Eubanks <charlie@troyairpark.com>wrote:
Hello All
Any Rebel builder out there who can readily measure the length, tip/to tip
of there Teleflex cable? Mine measure 66 1/4" and I am concerned it might
be
about 3-4" short. I can not route it behind and over the 2" aileron torque
tube and reach the flap handle. Thanks in advance.
Charlie E. 802R


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

gleeso1

[rebel-builders] Teleflex Cable

Post by gleeso1 » Sun Feb 19, 2012 5:37 pm

G'Day All,
Mine is 74 1/8" just to confuse the issue. That's threaded end to end.

Sorry Charlie.

Regards
John
Rebel 804 down under.

craig wrote:
Hi Charlie,

My teleflex is 72 1/4". The one that came with the split flaps kit is I was
trying to sell is 66 1/4". They must have given you the wrong one. That's
no good. Sorry for that bit of bad news. CW




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

craig

[rebel-builders] Teleflex Cable

Post by craig » Sun Feb 19, 2012 5:37 pm

That's the Australian difference; below the equator. :)



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Jeff Micheal

[rebel-builders] Teleflex Cable

Post by Jeff Micheal » Sun Feb 19, 2012 5:37 pm

Charlie,

Teleflex Cable #4703GG5-074B (74 inch) for the Rebel flapperon system.

Cheers,
Jeff


On Tue, Oct 6, 2009 at 10:24 PM, craig <snowyrvr@mtaonline.net> wrote:
That's the Australian difference; below the equator. :)



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Charlie Eubanks

[rebel-builders] Teleflex Cable

Post by Charlie Eubanks » Sun Feb 19, 2012 5:37 pm

Ron, Craig, John & Jeff
Thanks for the help in solving my problem. If Ron's cable is available I am
back in business. Don't know what we would do without this net. Thanks
again.
Charlie E. 802R
----- Original Message -----
From: "Charlie Eubanks" <charlie@troyairpark.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, October 06, 2009 5:42 PM
Subject: [rebel-builders] Teleflex Cable

Hello All
Any Rebel builder out there who can readily measure the length, tip/to tip
of there Teleflex cable? Mine measure 66 1/4" and I am concerned it might
be
about 3-4" short. I can not route it behind and over the 2" aileron torque
tube and reach the flap handle. Thanks in advance.
Charlie E. 802R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

mike jones

[rebel-builders] Teleflex Cable

Post by mike jones » Sun Feb 19, 2012 5:37 pm

My cable says 4703gg5-072b, 3451 so guess I have a 72 inch cable, couple of
inches short but seems to reach but have to go pretty direct to connect it

cheers

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jeff
Micheal
Sent: Wednesday, October 07, 2009 2:00 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Teleflex Cable

Charlie,

Teleflex Cable #4703GG5-074B (74 inch) for the Rebel flapperon system.

Cheers,
Jeff


On Tue, Oct 6, 2009 at 10:24 PM, craig <snowyrvr@mtaonline.net> wrote:
That's the Australian difference; below the equator. :)



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Jeff Micheal

[rebel-builders] Teleflex Cable

Post by Jeff Micheal » Sun Feb 19, 2012 5:37 pm

Mike,

The part number I gave is from a current ship list.......... I'm sure your
list might be a "tad" outdated. Either way 72" to 74" looks like it will
work.

Cheers,
Jeff


On Wed, Oct 7, 2009 at 2:12 PM, mike jones <mfjrebel007r@cogeco.ca> wrote:
My cable says 4703gg5-072b, 3451 so guess I have a 72 inch cable, couple of
inches short but seems to reach but have to go pretty direct to connect it

cheers

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jeff
Micheal
Sent: Wednesday, October 07, 2009 2:00 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Teleflex Cable

Charlie,

Teleflex Cable #4703GG5-074B (74 inch) for the Rebel flapperon system.

Cheers,
Jeff


On Tue, Oct 6, 2009 at 10:24 PM, craig <snowyrvr@mtaonline.net> wrote:
That's the Australian difference; below the equator. :)



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

N.Smith

[rebel-builders] Teleflex Cable

Post by N.Smith » Sun Feb 19, 2012 5:37 pm

Hi Charlie
I think what you have there is an Elite cable. It's quite a bit shorter than
the rebel one !
Nig
745E

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Charlie Eubanks
Sent: 07 October 2009 12:59
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Teleflex Cable

Ron, Craig, John & Jeff
Thanks for the help in solving my problem. If Ron's cable is available I am
back in business. Don't know what we would do without this net. Thanks
again.
Charlie E. 802R
----- Original Message -----
From: "Charlie Eubanks" <charlie@troyairpark.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, October 06, 2009 5:42 PM
Subject: [rebel-builders] Teleflex Cable

Hello All
Any Rebel builder out there who can readily measure the length, tip/to tip
of there Teleflex cable? Mine measure 66 1/4" and I am concerned it might
be
about 3-4" short. I can not route it behind and over the 2" aileron torque
tube and reach the flap handle. Thanks in advance.
Charlie E. 802R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.421 / Virus Database: 270.14.5/2419 - Release Date: 10/07/09
05:18:00




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Charlie Eubanks

[rebel-builders] Teleflex Cable

Post by Charlie Eubanks » Sun Feb 19, 2012 5:37 pm

Thanks for the info Nig
Looks like Ron Shannon has come to my rescue. He has a unused cable he is
going to send me. Did Philippe Berjaud ever get his gear fixed on his Elite
back in the air?
Charlie E. 802R
----- Original Message -----
From: "N.Smith" <admin@airnig.co.uk>
To: <rebel-builders@dcsol.com>
Sent: Thursday, October 08, 2009 6:14 AM
Subject: RE: [rebel-builders] Teleflex Cable

Hi Charlie
I think what you have there is an Elite cable. It's quite a bit shorter
than
the rebel one !
Nig
745E

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Charlie Eubanks
Sent: 07 October 2009 12:59
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Teleflex Cable

Ron, Craig, John & Jeff
Thanks for the help in solving my problem. If Ron's cable is available I
am
back in business. Don't know what we would do without this net. Thanks
again.
Charlie E. 802R
----- Original Message -----
From: "Charlie Eubanks" <charlie@troyairpark.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, October 06, 2009 5:42 PM
Subject: [rebel-builders] Teleflex Cable

Hello All
Any Rebel builder out there who can readily measure the length, tip/to
tip
of there Teleflex cable? Mine measure 66 1/4" and I am concerned it might
be
about 3-4" short. I can not route it behind and over the 2" aileron
torque
tube and reach the flap handle. Thanks in advance.
Charlie E. 802R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.421 / Virus Database: 270.14.5/2419 - Release Date: 10/07/09
05:18:00




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Philippe BERJAUD

[rebel-builders] Teleflex Cable

Post by Philippe BERJAUD » Sun Feb 19, 2012 5:37 pm

Hello Charlie,
We eventually fixed the landing gear and I made about 40 hrs of flight during the summer and 120 landings and so far, it works all right . Thank you again for the tube. It helped me a lot.
Regards.
Philippe




Message du 08/10/09 13:59
De : "Charlie Eubanks"
A : rebel-builders@dcsol.com
Copie à :
Objet : Re: [rebel-builders] Teleflex Cable


Thanks for the info Nig
Looks like Ron Shannon has come to my rescue. He has a unused cable he is
going to send me. Did Philippe Berjaud ever get his gear fixed on his Elite
back in the air?
Charlie E. 802R
----- Original Message -----
From: "N.Smith"
To:
Sent: Thursday, October 08, 2009 6:14 AM
Subject: RE: [rebel-builders] Teleflex Cable

Hi Charlie
I think what you have there is an Elite cable. It's quite a bit shorter
than
the rebel one !
Nig
745E

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Charlie Eubanks
Sent: 07 October 2009 12:59
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Teleflex Cable

Ron, Craig, John & Jeff
Thanks for the help in solving my problem. If Ron's cable is available I
am
back in business. Don't know what we would do without this net. Thanks
again.
Charlie E. 802R
----- Original Message -----
From: "Charlie Eubanks"
To:
Sent: Tuesday, October 06, 2009 5:42 PM
Subject: [rebel-builders] Teleflex Cable

Hello All
Any Rebel builder out there who can readily measure the length, tip/to
tip
of there Teleflex cable? Mine measure 66 1/4" and I am concerned it might
be
about 3-4" short. I can not route it behind and over the 2" aileron
torque
tube and reach the flap handle. Thanks in advance.
Charlie E. 802R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.421 / Virus Database: 270.14.5/2419 - Release Date: 10/07/09
05:18:00




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Charlie Eubanks

[rebel-builders] Teleflex Cable

Post by Charlie Eubanks » Sun Feb 19, 2012 5:37 pm

Hello Philippe
Good to hear from you, glad you are back in the air and everything is
working well. I don't know if you have been following the net recently but
Ron Shannon just came to my rescue with the right Teleflex cable I needed.
This pay forward thing really works. Happy flying.
Charlie E. 802R
----- Original Message -----
From: "Philippe BERJAUD" <philiberj@orange.fr>
To: <rebel-builders@dcsol.com>
Sent: Thursday, October 08, 2009 7:34 AM
Subject: Re: [rebel-builders] Teleflex Cable


[quote]Hello Charlie,
We eventually fixed the landing gear and I made about 40 hrs of flight
during the summer and 120 landings and so far, it works all right . Thank
you again for the tube. It helped me a lot.
Regards.
Philippe





[quote]Message du 08/10/09 13:59
De : "Charlie Eubanks"
A : rebel-builders@dcsol.com
Copie

Wayne G. O'Shea

[rebel-builders] Teleflex cable

Post by Wayne G. O'Shea » Sun Feb 19, 2012 11:34 pm

Paul... sorry I didn't have what you/he needs. They are a Marine industry
item and Teleflex gets it's name from the company of the same name...
although they could be a generic item bought elsewhere.

Did you try sending the factory an email as I suggested?

Wayne

----- Original Message -----
From: "Paul Michel" <n616pm@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, October 07, 2011 10:10 PM
Subject: [rebel-builders] Teleflex cable

Hey group:

My good friend in Brazil, Jose Gozzi, is on the final leg of his Rebel
project and is in dire need of the shorter Teleflex Cable for his split
flap/aeileron. He says it is supposed to be 66 1/4 inches long and has a
74
inch like mine.

Does anyone have one available for purchase and/or lease etc. so I can get
him flying ASAP? As soon as I can procure one from MAC I will return it
and
pay all the postages etc.

One of his sons will be coming to the US in a few weeks and I would like
to
have it available for him to hand carry it back to Brazil with him.

Or can anyone tell me who the vendor for the original is so I can go
direct
procurement or have the spare I have modified to the shorter length.

Paul J. Michel
Suwannee [image: Options]Belle Airport (9FL0)
O'Brien, Florida




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Paul Michel

[rebel-builders] Teleflex cable

Post by Paul Michel » Sun Feb 19, 2012 11:34 pm

Wayne
Yep on the factory. I understand with their current workload it takes a bit
of time and just would like to have all my ducks in a row when Jose's son is
here in Florida.

Paul

On Fri, Oct 7, 2011 at 10:23 PM, Wayne G. O'Shea <oifa@irishfield.on.ca>wrote:
Paul... sorry I didn't have what you/he needs. They are a Marine industry
item and Teleflex gets it's name from the company of the same name...
although they could be a generic item bought elsewhere.

Did you try sending the factory an email as I suggested?

Wayne

----- Original Message -----
From: "Paul Michel" <n616pm@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, October 07, 2011 10:10 PM
Subject: [rebel-builders] Teleflex cable

Hey group:

My good friend in Brazil, Jose Gozzi, is on the final leg of his Rebel
project and is in dire need of the shorter Teleflex Cable for his split
flap/aeileron. He says it is supposed to be 66 1/4 inches long and has a
74
inch like mine.

Does anyone have one available for purchase and/or lease etc. so I can
get
him flying ASAP? As soon as I can procure one from MAC I will return it
and
pay all the postages etc.

One of his sons will be coming to the US in a few weeks and I would like
to
have it available for him to hand carry it back to Brazil with him.

Or can anyone tell me who the vendor for the original is so I can go
direct
procurement or have the spare I have modified to the shorter length.

Paul J. Michel
Suwannee [image: Options]Belle Airport (9FL0)
O'Brien, Florida




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea

[rebel-builders] Teleflex cable

Post by Wayne G. O'Shea » Sun Feb 19, 2012 11:34 pm

Chances are Darryl will answer your email on a/the weekend.. late at night.

----- Original Message -----
From: "Paul Michel" <n616pm@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, October 07, 2011 10:35 PM
Subject: Re: [rebel-builders] Teleflex cable

Wayne
Yep on the factory. I understand with their current workload it takes a
bit
of time and just would like to have all my ducks in a row when Jose's son
is
here in Florida.

Paul

On Fri, Oct 7, 2011 at 10:23 PM, Wayne G. O'Shea
<oifa@irishfield.on.ca>wrote:
Paul... sorry I didn't have what you/he needs. They are a Marine industry
item and Teleflex gets it's name from the company of the same name...
although they could be a generic item bought elsewhere.

Did you try sending the factory an email as I suggested?

Wayne

----- Original Message -----
From: "Paul Michel" <n616pm@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, October 07, 2011 10:10 PM
Subject: [rebel-builders] Teleflex cable

Hey group:

My good friend in Brazil, Jose Gozzi, is on the final leg of his Rebel
project and is in dire need of the shorter Teleflex Cable for his split
flap/aeileron. He says it is supposed to be 66 1/4 inches long and has
a
74
inch like mine.

Does anyone have one available for purchase and/or lease etc. so I can
get
him flying ASAP? As soon as I can procure one from MAC I will return
it
and
pay all the postages etc.

One of his sons will be coming to the US in a few weeks and I would
like
to
have it available for him to hand carry it back to Brazil with him.

Or can anyone tell me who the vendor for the original is so I can go
direct
procurement or have the spare I have modified to the shorter length.

Paul J. Michel
Suwannee [image: Options]Belle Airport (9FL0)
O'Brien, Florida




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Locked