Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] Amphib nose bearing

Converted from Wildcat! database. (read only)
Locked
Wayne G. O'Shea

[rebel-builders] Amphib nose bearing

Post by Wayne G. O'Shea » Sun Feb 19, 2012 5:21 pm

You sure they aren't NSK ??? If so SKF and FAG would be the same number.

Or measure with vernier OD / ID and width... Probably just a common 6201 or
6202 bearing. If you don't get any answers I'll go pull a wheel off the ones
I just finished rebuilding and check the bearings.

Wayne


----- Original Message -----
From: <Rebflyer@aol.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, April 03, 2009 5:08 PM
Subject: [rebel-builders] Amphib nose bearing

Hi all,
Has anyone found a good place to buy the KSK bearing that MAM used in the
nose wheel on the amphibs?
Better yet, how about a cross reference. The P/N is KSK 1628.
I just haven't found the right site yet I guess.
I found one during inspection that growls.
As always, thanks all for the help.
Curt Martin
N97MR
**************Hurry! April 15th is almost here. File your Federal taxes
FREE
with TaxACT.
(http://pr.atwola.com/promoclk/100126575 ... 1%26p%3D82)




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Wayne G. O'Shea

[rebel-builders] Amphib nose bearing

Post by Wayne G. O'Shea » Sun Feb 19, 2012 5:21 pm

..and add 2RS for two seals..

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, April 03, 2009 5:19 PM
Subject: Re: [rebel-builders] Amphib nose bearing

You sure they aren't NSK ??? If so SKF and FAG would be the same number.

Or measure with vernier OD / ID and width... Probably just a common 6201
or
6202 bearing. If you don't get any answers I'll go pull a wheel off the
ones
I just finished rebuilding and check the bearings.

Wayne


----- Original Message -----
From: <Rebflyer@aol.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, April 03, 2009 5:08 PM
Subject: [rebel-builders] Amphib nose bearing

Hi all,
Has anyone found a good place to buy the KSK bearing that MAM used in
the
nose wheel on the amphibs?
Better yet, how about a cross reference. The P/N is KSK 1628.
I just haven't found the right site yet I guess.
I found one during inspection that growls.
As always, thanks all for the help.
Curt Martin
N97MR
**************Hurry! April 15th is almost here. File your Federal taxes
FREE
with TaxACT.
(http://pr.atwola.com/promoclk/100126575 ... 1%26p%3D82)




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Wayne G. O'Shea

[rebel-builders] Amphib nose bearing

Post by Wayne G. O'Shea » Sun Feb 19, 2012 5:21 pm

Well Curt... mine are RBI Bearings.. same number 1628-2RS

They are .625 ID... 1.625 OD and .5 width.

Your nearest USA RBI dealer is in IL
1055 Stevenson Ct Suite 102W Roselle IL 60172 (800) 708-2128

Also NICE bearings are the same number 1628DC - the DC is for double seal
with them

AST Bearings.. same 1628-2RS number


----- Original Message -----
From: <Rebflyer@aol.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, April 03, 2009 5:08 PM
Subject: [rebel-builders] Amphib nose bearing

Hi all,
Has anyone found a good place to buy the KSK bearing that MAM used in the
nose wheel on the amphibs?
Better yet, how about a cross reference. The P/N is KSK 1628.
I just haven't found the right site yet I guess.
I found one during inspection that growls.
As always, thanks all for the help.
Curt Martin
N97MR
**************Hurry! April 15th is almost here. File your Federal taxes
FREE
with TaxACT.
(http://pr.atwola.com/promoclk/100126575 ... 1%26p%3D82)




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
rebflyer

[rebel-builders] Amphib nose bearing

Post by rebflyer » Sun Feb 19, 2012 5:21 pm

Wayne,
? Thanks so much!? Those numbers I can find much easier!?? Mine were definetely KSK bearings. ?Had the I.D. and O.D. just was not sure about the weight capabilities and really wasn't really looking forward to that much research.
? You can bet this will get printed off and put in the log book for further reference.
?? As always thanks so much
? Curt Martin
? N97MR


-----Original Message-----
From: Wayne G. O'Shea <oifa@irishfield.on.ca>
To: rebel-builders@dcsol.com
Sent: Fri, 3 Apr 2009 9:15 pm
Subject: Re: [rebel-builders] Amphib nose bearing



Well Curt... mine are RBI Bearings.. same number 1628-2RS

They are .625 ID... 1.625 OD and .5 width.

Your nearest USA RBI dealer is in IL
1055 Stevenson Ct Suite 102W Roselle IL 60172 (800) 708-2128

Also NICE bearings are the same number 1628DC - the DC is for double seal
with them

AST Bearings.. same 1628-2RS number


----- Original Message -----
From: <Rebflyer@aol.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, April 03, 2009 5:08 PM
Subject: [rebel-builders] Amphib nose bearing

Hi all,
Has anyone found a good place to buy the KSK bearing that MAM used in the
nose wheel on the amphibs?
Better yet, how about a cross reference. The P/N is KSK 1628.
I just haven't found the right site yet I guess.
I found one during inspection that growls.
As always, thanks all for the help.
Curt Martin
N97MR
**************Hurry! April 15th is almost here. File your Federal taxes
FREE
with TaxACT.
(http://pr.atwola.com/promoclk/100126575 ... 1%26p%3D82)




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”