Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] Drawings chapter 20

Converted from Wildcat! database. (read only)
Locked
gleeso

[rebel-builders] Drawings chapter 20

Post by gleeso » Sun Feb 19, 2012 5:07 pm

Mine's the same, and so is the CD, FWIW 20.8.8 has the dims, but no
drwg, both on the CD and the manual.
John Gleeson.
Rebel 804 down under


Rebecca Brownell wrote:
Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.10.7/1894 - Release Date: 1/14/2009 7:27 PM


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Charlie Eubanks

[rebel-builders] Drawings chapter 20

Post by Charlie Eubanks » Sun Feb 19, 2012 5:07 pm

I am a little confused. Fig 20.11.5 in my manual just shows the assembly of
the rudder cable, cable shackles and clevis pin. No dimensions required. My
Fig.20.8.8 gives the construction dimensions of the elevator pus pull
tubes.
Charlie E. 802R
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 14, 2009 9:47 PM
Subject: [rebel-builders] Drawings chapter 20

Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Rebecca Brownell

[rebel-builders] Drawings chapter 20

Post by Rebecca Brownell » Sun Feb 19, 2012 5:11 pm

Hi charlie ,it the rudder cable assembly figure that I need fig 20.11.5.
any way you could put that on an email?
thanks
jason
On 15-Jan-09, at 10:16 AM, Charlie Eubanks wrote:
I am a little confused. Fig 20.11.5 in my manual just shows the
assembly of
the rudder cable, cable shackles and clevis pin. No dimensions
required. My
Fig.20.8.8 gives the construction dimensions of the elevator pus pull
tubes.
Charlie E. 802R
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 14, 2009 9:47 PM
Subject: [rebel-builders] Drawings chapter 20

Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Ken

[rebel-builders] Drawings chapter 20

Post by Ken » Sun Feb 19, 2012 5:11 pm

Found a good copy and have uploaded it as 20-11-5.doc
Ken


Rebecca Brownell wrote:
Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Charlie Eubanks

[rebel-builders] Drawings chapter 20

Post by Charlie Eubanks » Sun Feb 19, 2012 5:11 pm

Looks like Ken has got you covered
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, January 15, 2009 11:38 AM
Subject: Re: [rebel-builders] Drawings chapter 20

Hi charlie ,it the rudder cable assembly figure that I need fig 20.11.5.
any way you could put that on an email?
thanks
jason
On 15-Jan-09, at 10:16 AM, Charlie Eubanks wrote:
I am a little confused. Fig 20.11.5 in my manual just shows the
assembly of
the rudder cable, cable shackles and clevis pin. No dimensions
required. My
Fig.20.8.8 gives the construction dimensions of the elevator pus pull
tubes.
Charlie E. 802R
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 14, 2009 9:47 PM
Subject: [rebel-builders] Drawings chapter 20

Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Tim Hickey

[rebel-builders] Drawings chapter 20

Post by Tim Hickey » Sun Feb 19, 2012 5:12 pm

Just a caution on this upload.
My computer would not directly download that file. It will download pictures
directly, but not that file. I had to right click it, and then do a "save
as" command. Then I could open and view it.

Computers: just one more of life's mysteries.

Tim Hickey
R 808


----- Original Message -----
From: "Ron Shannon" <rshannon@cruzcom.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, January 19, 2009 8:13 PM
Subject: Re: [rebel-builders] Drawings chapter 20

On the Rebel Builder's Site (https://www.dcsol.com/rebel.htm) in the
Files,
Rebel, Control Systems section.

Ron


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Rebecca Brownell

[rebel-builders] Drawings chapter 20

Post by Rebecca Brownell » Sun Feb 19, 2012 5:12 pm

AH!
Thanks
On 19-Jan-09, at 9:13 PM, Ron Shannon wrote:
On the Rebel Builder's Site (https://www.dcsol.com/rebel.htm) in the
Files,
Rebel, Control Systems section.

Ron



On Mon, Jan 19, 2009 at 6:06 PM, Rebecca Brownell
<brownell@candlelight.ca>wrote:
Forgive my being computerally challenged,but where would I find that
"upload"you speak of?
Thanks Ken
Jason
On 15-Jan-09, at 12:55 PM, Ken wrote:
Found a good copy and have uploaded it as 20-11-5.doc
Ken


Rebecca Brownell wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Rebecca Brownell

[rebel-builders] Drawings chapter 20

Post by Rebecca Brownell » Sun Feb 19, 2012 5:12 pm

Forgive my being computerally challenged,but where would I find that
"upload"you speak of?
Thanks Ken
Jason
On 15-Jan-09, at 12:55 PM, Ken wrote:
Found a good copy and have uploaded it as 20-11-5.doc
Ken


Rebecca Brownell wrote:
Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Ron Shannon

[rebel-builders] Drawings chapter 20

Post by Ron Shannon » Sun Feb 19, 2012 5:12 pm

On the Rebel Builder's Site (https://www.dcsol.com/rebel.htm) in the Files,
Rebel, Control Systems section.

Ron



On Mon, Jan 19, 2009 at 6:06 PM, Rebecca Brownell
<brownell@candlelight.ca>wrote:
Forgive my being computerally challenged,but where would I find that
"upload"you speak of?
Thanks Ken
Jason
On 15-Jan-09, at 12:55 PM, Ken wrote:
Found a good copy and have uploaded it as 20-11-5.doc
Ken


Rebecca Brownell wrote:
Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Charlie Eubanks

[rebel-builders] Drawings chapter 20

Post by Charlie Eubanks » Sun Feb 19, 2012 5:12 pm

I was able to open the drawing but I have a question for Ken. Where did you
get the drawing that you up loaded and how did you get it in color?
Charlie
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, January 19, 2009 8:06 PM
Subject: Re: [rebel-builders] Drawings chapter 20

Forgive my being computerally challenged,but where would I find that
"upload"you speak of?
Thanks Ken
Jason
On 15-Jan-09, at 12:55 PM, Ken wrote:
Found a good copy and have uploaded it as 20-11-5.doc
Ken


Rebecca Brownell wrote:
Hello all
could anyone send me the drawing 20.11.5 chapter20.My manual and the
pdf file I got from MAM Has the dimentions and discriptions but no
picture of the part.Printing error I guess.I don"t have the manual on
disc.If anyone could help me on that I'd appreciate it.
Thanks Jason


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Ken

[rebel-builders] Drawings chapter 20

Post by Ken » Sun Feb 19, 2012 5:12 pm

Well I found it in the file 'D:\Rebel2000\technical\20 Controls.doc'
dated 6/8/2000 on what was a very early CD copy of the Manual. Looks
liked I got it in 2000.

The first time I looked at the copy of the file on my hard drive it was
also missing the diagram. It will probably disappear again if I clear
the memory cache. I only have Word2000, which judging by the dates, may
be the version of word that originally made the file.

Ken

Charlie Eubanks wrote:
I was able to open the drawing but I have a question for Ken. Where did you
get the drawing that you up loaded and how did you get it in color?
Charlie
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, January 19, 2009 8:06 PM
Subject: Re: [rebel-builders] Drawings chapter 20

Forgive my being computerally challenged,but where would I find that
"upload"you speak of?
Thanks Ken
Jason
On 15-Jan-09, at 12:55 PM, Ken wrote:
Found a good copy and have uploaded it as 20-11-5.doc
Ken


Rebecca Brownell wrote:

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”