just looks much cleaner.
Wayne
----- Original Message -----
From: <bransom@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, January 13, 2009 1:17 AM
Subject: [rebel-builders] forward fuse questions
Hi all, couple questions...
1. Is my memory right that some have put the engine reinforcement
gussets
on the inside instead of outside? Any problems putting it on the inside?
Picture for reference (Bruce G) with the gussets on the outside:
http://mae.ucdavis.edu/ransom/Murphy/mi ... Gusset.jpg
2. Here's the bigger thing bugging me... I cannot find in MAM where it
says to drill and rivet the side Fus-11s and door post braces (Fus-9s) to
the cage uprights (Fus-4). I've not done the Fus-11 witches hats or
engine
mount fittings yet, but have gotten firewall, top corner wraps, dashboard
all cleco'd in. BTW, yes, I'll do the double row up the post and 3/16
rivets up top.
Thanks,
-Ben/ 496R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
