Hi all
Having a deuce of a time trying to get the wraps between bulkhead A
and F bent properly to make the transition from the cabin
to the tail cone.Any helpful tricks out there?Any help would be
appreciated.
Thanks
Jason
817R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
bottom corner wraps(bulkhead A)
bottom corner wraps(bulkhead A)
Hi Jason
I used the wood cutout per MAM, and hit it with a rounded dolly. I marked a
line about 3/4" in from the end, on the inside of the wrap to keep track of
where I was hammering. Chamfer the edge of the wood form to avoid hammering
sharp lines in the wrap.
If helpful, some pictures at:
http://mae.ucdavis.edu/ransom/Murphy/20 ... 5/0805.htm
Cheers,
-Ben/ 496R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I used the wood cutout per MAM, and hit it with a rounded dolly. I marked a
line about 3/4" in from the end, on the inside of the wrap to keep track of
where I was hammering. Chamfer the edge of the wood form to avoid hammering
sharp lines in the wrap.
If helpful, some pictures at:
http://mae.ucdavis.edu/ransom/Murphy/20 ... 5/0805.htm
Cheers,
-Ben/ 496R
Hi all
Having a deuce of a time trying to get the wraps between bulkhead A
and F bent properly to make the transition from the cabin
to the tail cone.Any helpful tricks out there?Any help would be
appreciated.
Thanks
Jason
817R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------