[rebel-builders] roof edge cs rivets?

[Drew Dalgleish]

At 07:10 PM 3/11/2008 -0900, you wrote:

I'm dimpling the rivet holes along the side edges of the roof and the
Fus-27 root rib flanges. MAM says to hold off riveting to the angle stock
behind the root rib flanges. I also assume since they don't mention
countersinking the angle pieces, that they mean not to, i.e., it will be
regular dome 4410 rivets when the time comes. Right? (don't want to undo
for countersinking later)
Thanks,
-Ben

Hi Ben You just need to dimple where the wing root fairing will be so that
it ends up laying flat.
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[bransom]

Thanks Drew
-Ben

Hi Ben You just need to dimple where the wing root fairing will be so that
it ends up laying flat.
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------