[rebel-builders] ls2 corvette engine on ebay

Bill Maxwell · Post by **Bill Maxwell** » Sun Feb 19, 2012 4:26 pm

Hey Drew, how did you manage to pre-post, several days ago, a message
that I am not supposed to get until tomorrow, our time? You must be in
the only time zone that is a matter of days ahead of UTC :)

cheers
Bill 753R

Drew Dalgleish wrote:

I just saw this on another group and thought there may be an interested
moose builder.

http://cgi.ebay.com/ebaymotors/GM-Corve ... nversion_W
0QQitemZ160206357499QQcmdZViewItem?hash=item160206357499
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Drew Dalgleish · Post by **Drew Dalgleish** » Sun Feb 19, 2012 4:26 pm

Magic fairy dust on the keyboard? I really don't know computers mostly just
confuse me.

At 03:49 PM 2/11/2008 +1100, you wrote:

Hey Drew, how did you manage to pre-post, several days ago, a message
that I am not supposed to get until tomorrow, our time? You must be in
the only time zone that is a matter of days ahead of UTC :)

cheers
Bill 753R

Drew Dalgleish wrote:
I just saw this on another group and thought there may be an interested
moose builder.

http://cgi.ebay.com/ebaymotors/GM-Corve ... nversion_W

0QQitemZ160206357499QQcmdZViewItem?hash=item160206357499
Drew

Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Chris Hodgson · Post by **Chris Hodgson** » Sun Feb 19, 2012 4:26 pm

Does anyone know anything about Helicor or their PSRU?
Chris

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Drew
Dalgleish
Sent: February 11, 2008 12:19 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] ls2 corvette engine on ebay

I just saw this on another group and thought there may be an interested
moose builder.

http://cgi.ebay.com/ebaymotors/GM-Corve ... nversion_W
0QQitemZ160206357499QQcmdZViewItem?hash=item160206357499
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Mike Davis · Post by **Mike Davis** » Sun Feb 19, 2012 4:26 pm

It was offered by the same folks that made the Turbine Moose... Aerotek
Aviation. I don't believe they still offer it however. Not sure why, I
thought it looked very promising.

http://www.aerotekaviation.ca/mot-Intro-e.html

They used to have a video up there of a C185 with the prototype motor, which
was a LS1. But I can't find that anymore.

Mike

----- Original Message -----
From: "Chris Hodgson" <chrishodgson@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 11, 2008 12:28 PM
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

Does anyone know anything about Helicor or their PSRU?
Chris

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Drew
Dalgleish
Sent: February 11, 2008 12:19 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] ls2 corvette engine on ebay

I just saw this on another group and thought there may be an interested
moose builder.

http://cgi.ebay.com/ebaymotors/GM-Corve ... nversion_W
0QQitemZ160206357499QQcmdZViewItem?hash=item160206357499
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Chris Hodgson · Post by **Chris Hodgson** » Sun Feb 19, 2012 4:26 pm

Mike,
I remember emailing you 2 years ago asking about V8s and you saying you were
thinking about the Helicor. I know Aerotek has been promoting their turbine
more. I wonder if there was a problem with the Helicor. At that price very
tempting - anyone else interested?
Chris

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]
Sent: February 11, 2008 2:58 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] ls2 corvette engine on ebay

It was offered by the same folks that made the Turbine Moose... Aerotek
Aviation. I don't believe they still offer it however. Not sure why, I
thought it looked very promising.

http://www.aerotekaviation.ca/mot-Intro-e.html

They used to have a video up there of a C185 with the prototype motor, which

was a LS1. But I can't find that anymore.

Mike

----- Original Message -----
From: "Chris Hodgson" <chrishodgson@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 11, 2008 12:28 PM
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

Does anyone know anything about Helicor or their PSRU?
Chris

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Drew
Dalgleish
Sent: February 11, 2008 12:19 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] ls2 corvette engine on ebay

I just saw this on another group and thought there may be an interested
moose builder.

http://cgi.ebay.com/ebaymotors/GM-Corve ... nversion_W

0QQitemZ160206357499QQcmdZViewItem?hash=item160206357499
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Mike Kimball · Post by **Mike Kimball** » Sun Feb 19, 2012 4:26 pm

I have about $36,000 invested in my Rodec Chevy 350 engine/PSRU/engine
mount/accessories and mine is carbureted. That is a ridiculously low price.
If that is a PSRU made by Aerotek it is a dead ringer for the CAM500 I have
which cost over $12,000. Anybody interested in a V8 conversion should take
a real good look at that one.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Chris
Hodgson
Sent: Monday, February 11, 2008 2:25 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

Mike,
I remember emailing you 2 years ago asking about V8s and you saying you were
thinking about the Helicor. I know Aerotek has been promoting their turbine
more. I wonder if there was a problem with the Helicor. At that price very
tempting - anyone else interested?
Chris

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]
Sent: February 11, 2008 2:58 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] ls2 corvette engine on ebay

It was offered by the same folks that made the Turbine Moose... Aerotek
Aviation. I don't believe they still offer it however. Not sure why, I
thought it looked very promising.

http://www.aerotekaviation.ca/mot-Intro-e.html

They used to have a video up there of a C185 with the prototype motor, which

was a LS1. But I can't find that anymore.

Mike

----- Original Message -----
From: "Chris Hodgson" <chrishodgson@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 11, 2008 12:28 PM
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

Does anyone know anything about Helicor or their PSRU?
Chris

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Drew
Dalgleish
Sent: February 11, 2008 12:19 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] ls2 corvette engine on ebay

I just saw this on another group and thought there may be an interested
moose builder.

http://cgi.ebay.com/ebaymotors/GM-Corve ... nversion_W

0QQitemZ160206357499QQcmdZViewItem?hash=item160206357499
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

jean.poirier · Post by **jean.poirier** » Sun Feb 19, 2012 4:26 pm

Hello Mike

When you say $36000.00 is a very low price... versus a new Lycoming? The best deal was not the M14P? Hp/dollards?
Just for info, my "little" Rebel will never use a big engine like those!

Jean
Rebel 747R

On Mon Feb 11 18:56 , Mike Kimball <mkimball@gci.net> sent:

I have about $36,000 invested in my Rodec Chevy 350 engine/PSRU/engine
mount/accessories and mine is carbureted. That is a ridiculously low price.
If that is a PSRU made by Aerotek it is a dead ringer for the CAM500 I have
which cost over $12,000. Anybody interested in a V8 conversion should take
a real good look at that one.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com [mike.davis@dcsol.com','','','')">mike.davis@dcsol.com] On Behalf Of Chris
Hodgson
Sent: Monday, February 11, 2008 2:25 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

Mike,
I remember emailing you 2 years ago asking about V8s and you saying you were
thinking about the Helicor. I know Aerotek has been promoting their turbine
more. I wonder if there was a problem with the Helicor. At that price very
tempting - anyone else interested?
Chris

-----Original Message-----
From: mike.davis@dcsol.com [mike.davis@dcsol.com','','','')">mike.davis@dcsol.com]
Sent: February 11, 2008 2:58 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] ls2 corvette engine on ebay

It was offered by the same folks that made the Turbine Moose... Aerotek
Aviation. I don't believe they still offer it however. Not sure why, I
thought it looked very promising.

http://www.aerotekaviation.ca/mot-Intro-e.html

They used to have a video up there of a C185 with the prototype motor, which

was a LS1. But I can't find that anymore.

Mike

----- Original Message -----
From: "Chris Hodgson" chrishodgson@shaw.ca>
To: rebel-builders@dcsol.com>
Sent: Monday, February 11, 2008 12:28 PM
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

Does anyone know anything about Helicor or their PSRU?
Chris

-----Original Message-----
From: mike.davis@dcsol.com [mike.davis@dcsol.com','','','')">mike.davis@dcsol.com] On Behalf Of Drew
Dalgleish
Sent: February 11, 2008 12:19 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] ls2 corvette engine on ebay

I just saw this on another group and thought there may be an interested
moose builder.

http://cgi.ebay.com/ebaymotors/GM-Corve ... nversion_W
0QQitemZ160206357499QQcmdZViewItem?hash=item160206357499
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Chris Hodgson · Post by **Chris Hodgson** » Sun Feb 19, 2012 4:26 pm

I think Mike meant the $6000 minimum bid for the LS2 as ridiculously low.
Wouldn't buy you a Lycoming core.
Chris

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
jean.poirier@oxyportneuf.com
Sent: February 11, 2008 4:15 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

Hello Mike

When you say $36000.00 is a very low price... versus a new Lycoming? The
best deal was not the M14P? Hp/dollards?
Just for info, my "little" Rebel will never use a big engine like those!

Jean
Rebel 747R

On Mon Feb 11 18:56 , Mike Kimball <mkimball@gci.net> sent:

I have about $36,000 invested in my Rodec Chevy 350 engine/PSRU/engine
mount/accessories and mine is carbureted. That is a ridiculously low

price.

If that is a PSRU made by Aerotek it is a dead ringer for the CAM500 I have
which cost over $12,000. Anybody interested in a V8 conversion should take
a real good look at that one.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com

[mike.davis@dcsol.com','','','')">mike.davis@dcsol.com] On Behalf Of Chris

Hodgson
Sent: Monday, February 11, 2008 2:25 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

Mike,
I remember emailing you 2 years ago asking about V8s and you saying you

were

thinking about the Helicor. I know Aerotek has been promoting their

turbine

more. I wonder if there was a problem with the Helicor. At that price

very

tempting - anyone else interested?
Chris

-----Original Message-----
From: mike.davis@dcsol.com

[mike.davis@dcsol.com','','','')">mike.davis@dcsol.com]

Sent: February 11, 2008 2:58 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] ls2 corvette engine on ebay

It was offered by the same folks that made the Turbine Moose... Aerotek
Aviation. I don't believe they still offer it however. Not sure why, I
thought it looked very promising.

http://www.aerotekaviation.ca/mot-Intro-e.html

They used to have a video up there of a C185 with the prototype motor,

which

was a LS1. But I can't find that anymore.

Mike

----- Original Message -----
From: "Chris Hodgson" chrishodgson@shaw.ca>
To: rebel-builders@dcsol.com>
Sent: Monday, February 11, 2008 12:28 PM
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

Does anyone know anything about Helicor or their PSRU?
Chris

-----Original Message-----
From: mike.davis@dcsol.com

[mike.davis@dcsol.com','','','')">mike.davis@dcsol.com] On Behalf Of Drew

Dalgleish
Sent: February 11, 2008 12:19 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] ls2 corvette engine on ebay

I just saw this on another group and thought there may be an interested
moose builder.

http://cgi.ebay.com/ebaymotors/GM-Corve ... Conversion_

W

0QQitemZ160206357499QQcmdZViewItem?hash=item160206357499
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Brian · Post by **Brian** » Sun Feb 19, 2012 4:26 pm

I have a copy of the video of the C185 if any one is interested. It's about
2.5MB, so for the sake of those that dial up, I don't want to send it to the
entire list.

Too bad that they don't offer it any more. I thought it looked promising.
I sent a note to the ebayer. Apparently this was slated for a Comp Air.

Brian

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]
Sent: Monday, February 11, 2008 5:58 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] ls2 corvette engine on ebay

It was offered by the same folks that made the Turbine Moose... Aerotek
Aviation. I don't believe they still offer it however. Not sure why, I
thought it looked very promising.

http://www.aerotekaviation.ca/mot-Intro-e.html

They used to have a video up there of a C185 with the prototype motor, which

was a LS1. But I can't find that anymore.

Mike

----- Original Message -----
From: "Chris Hodgson" <chrishodgson@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 11, 2008 12:28 PM
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

Does anyone know anything about Helicor or their PSRU?
Chris

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Drew
Dalgleish
Sent: February 11, 2008 12:19 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] ls2 corvette engine on ebay

I just saw this on another group and thought there may be an interested
moose builder.

http://cgi.ebay.com/ebaymotors/GM-Corve ... nversion_W

0QQitemZ160206357499QQcmdZViewItem?hash=item160206357499
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Mike Davis · Post by **Mike Davis** » Sun Feb 19, 2012 4:26 pm

If you would Brian, just upload the video to the forum site, I'd like to
hang on to a copy.

Mike

----- Original Message -----
From: "Brian" <Northernliving@sc.rr.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 11, 2008 3:30 PM
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

I have a copy of the video of the C185 if any one is interested. It's
about
2.5MB, so for the sake of those that dial up, I don't want to send it to
the
entire list.

Too bad that they don't offer it any more. I thought it looked promising.
I sent a note to the ebayer. Apparently this was slated for a Comp Air.

Brian

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]
Sent: Monday, February 11, 2008 5:58 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] ls2 corvette engine on ebay

It was offered by the same folks that made the Turbine Moose... Aerotek
Aviation. I don't believe they still offer it however. Not sure why, I
thought it looked very promising.

http://www.aerotekaviation.ca/mot-Intro-e.html

They used to have a video up there of a C185 with the prototype motor,
which

was a LS1. But I can't find that anymore.

Mike

----- Original Message -----
From: "Chris Hodgson" <chrishodgson@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 11, 2008 12:28 PM
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

Does anyone know anything about Helicor or their PSRU?
Chris

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Drew
Dalgleish
Sent: February 11, 2008 12:19 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] ls2 corvette engine on ebay

I just saw this on another group and thought there may be an interested
moose builder.

http://cgi.ebay.com/ebaymotors/GM-Corve ... nversion_W
0QQitemZ160206357499QQcmdZViewItem?hash=item160206357499
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Brian · Post by **Brian** » Sun Feb 19, 2012 4:26 pm

Okay - just loaded it up for those that want to feel like you're at the
races. It's in the S/M Engine section.

Brian

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]
Sent: Tuesday, February 12, 2008 2:23 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] ls2 corvette engine on ebay

If you would Brian, just upload the video to the forum site, I'd like to
hang on to a copy.

Mike

----- Original Message -----
From: "Brian" <Northernliving@sc.rr.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 11, 2008 3:30 PM
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

I have a copy of the video of the C185 if any one is interested. It's
about
2.5MB, so for the sake of those that dial up, I don't want to send it to
the
entire list.

Too bad that they don't offer it any more. I thought it looked promising.
I sent a note to the ebayer. Apparently this was slated for a Comp Air.

Brian

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]
Sent: Monday, February 11, 2008 5:58 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] ls2 corvette engine on ebay

It was offered by the same folks that made the Turbine Moose... Aerotek
Aviation. I don't believe they still offer it however. Not sure why, I
thought it looked very promising.

http://www.aerotekaviation.ca/mot-Intro-e.html

They used to have a video up there of a C185 with the prototype motor,
which

was a LS1. But I can't find that anymore.

Mike

----- Original Message -----
From: "Chris Hodgson" <chrishodgson@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 11, 2008 12:28 PM
Subject: RE: [rebel-builders] ls2 corvette engine on ebay

Does anyone know anything about Helicor or their PSRU?
Chris

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Drew
Dalgleish
Sent: February 11, 2008 12:19 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] ls2 corvette engine on ebay

I just saw this on another group and thought there may be an interested
moose builder.

http://cgi.ebay.com/ebaymotors/GM-Corve ... nversion_W

0QQitemZ160206357499QQcmdZViewItem?hash=item160206357499
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------