As mine wear or as the brackets wear, I replace them with the bronze
bushings that Aircraft Spruce sells. U have to shorten them a bit as they
are too long. They are about .0015 too much in diameter. I just managed to
get one in the bottom bracket on the rudder after 70 hrs of flying. Had it
apart for painting and so far, that was the only one that has worn the
bracket a bit.
Steve W
_________________________________________________________________From: "Ralph Baker" <rebaker@sc.rr.com>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: [rebel-builders] AIL-26
Date: Sat, 11 Aug 2007 17:48:30 -0400
This is the steel bushing in the flap / aileron brass pivot bushing. I
think they are 1/4" ID and 3/8" OD and about 9/16" long. Anyone in the
USA have some of these they would part with? I need at least one but would
take three. Let me know how much you want for them including cheapest
(USPS OK) to Sumter,South Carolina 29154.
Thanks,
Ralph Baker
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Windows Live Hotmail. Even hotter than before. Get a better look now.
www.newhotmail.ca?icid=WLHMENCA148
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------