bolted in, so the 4 rivets surrounding the bolt hole must be flush. If going
Cessna style leaf gear...you can just rivet with normal domed rivets.
----- Original Message -----
From: <bransom@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Thursday, May 03, 2007 2:36 AM
Subject: [rebel-builders] carry-thru gussets
Hi all,
I'm countersinking the four #11 holes in each of the fuselage bottom
carry-through gussets. Do I need to countersink deep enf to get a smooth
face along the gusset across the csk rivets? I think (looking ahead) it
looks like these areas are clearance for the bungee gear inside tubes, and
if so, I need to countersink enf to leave the csk rivet faces flush to the
gusset. If someone can please confirm this?
Thanks,
-Ben/ 496R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------