[rebel-builders] Torque Tube spacer CC-54

Mike Kimball · Post by **Mike Kimball** » Sun Feb 19, 2012 11:55 am

Let me check my left over parts box tonight. I'm pretty sure I have some
extra ones.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Keith
Leitch
Sent: Wednesday, February 28, 2007 11:27 AM
To: Murphy Rebel Builders
Subject: [rebel-builders] Torque Tube spacer CC-54

I think I forgot to send some of my parts over here to
Hawaii. I am at Chapter 10.14.1 and it states to
install 1/2" sleeve (CC-54) onto the torque tube. I
can't find CC-54 in my parts bin and my have left it
with the fuselage kit that was shipped to Minnesota.
Does anyone have the demensions for this part so as I
can make one. To me it seems to be nearly the same as
CC-100. 2"ID x .120 tubing?

Keith
R661

____________________________________________________________________________
________
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail beta.
http://new.mail.yahoo.com

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Keith Leitch · Post by **Keith Leitch** » Sun Feb 19, 2012 11:55 am

Thanks Mike!!!
--- Mike Kimball <mkimball@gci.net> wrote:

Let me check my left over parts box tonight. I'm
pretty sure I have some
extra ones.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com] On Behalf Of Keith
Leitch
Sent: Wednesday, February 28, 2007 11:27 AM
To: Murphy Rebel Builders
Subject: [rebel-builders] Torque Tube spacer CC-54

I think I forgot to send some of my parts over here
to
Hawaii. I am at Chapter 10.14.1 and it states to
install 1/2" sleeve (CC-54) onto the torque tube. I
can't find CC-54 in my parts bin and my have left it
with the fuselage kit that was shipped to Minnesota.
Does anyone have the demensions for this part so as
I
can make one. To me it seems to be nearly the same
as
CC-100. 2"ID x .120 tubing?

Keith
R661

____________________________________________________________________________

________
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail
beta.
http://new.mail.yahoo.com

-----------------------------------------------------------------

List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------
-----------------------------------------------------------------

List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------

____________________________________________________________________________________
Get your own web address.
Have a HUGE year through Yahoo! Small Business.
http://smallbusiness.yahoo.com/domains/?p=BESTDEAL

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea · Post by **Wayne G. O'Shea** » Sun Feb 19, 2012 11:55 am

Some vintages of kits had precut slices and others just had a short length
of 1/8" wall tube that slipped over top of the torque tube and you had to
cut the slices yourself from this stock.

----- Original Message -----
From: "Keith Leitch" <im_planecrazy@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 28, 2007 4:14 PM
Subject: RE: [rebel-builders] Torque Tube spacer CC-54

Thanks Mike!!!
--- Mike Kimball <mkimball@gci.net> wrote:

Let me check my left over parts box tonight. I'm
pretty sure I have some
extra ones.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com] On Behalf Of Keith
Leitch
Sent: Wednesday, February 28, 2007 11:27 AM
To: Murphy Rebel Builders
Subject: [rebel-builders] Torque Tube spacer CC-54

I think I forgot to send some of my parts over here
to
Hawaii. I am at Chapter 10.14.1 and it states to
install 1/2" sleeve (CC-54) onto the torque tube. I
can't find CC-54 in my parts bin and my have left it
with the fuselage kit that was shipped to Minnesota.
Does anyone have the demensions for this part so as
I
can make one. To me it seems to be nearly the same
as
CC-100. 2"ID x .120 tubing?

Keith
R661

____________________________________________________________________________
________
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail
beta.
http://new.mail.yahoo.com

-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------

____________________________________________________________________________________
Get your own web address.
Have a HUGE year through Yahoo! Small Business.
http://smallbusiness.yahoo.com/domains/?p=BESTDEAL

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Charlie Eubanks · Post by **Charlie Eubanks** » Sun Feb 19, 2012 11:55 am

Keith

The dim's you need for the "1/2" spacers is as follows. 2-1/4 OD x 2" ID x

Mike Kimball · Post by **Mike Kimball** » Sun Feb 19, 2012 11:55 am

Sorry. I looked through my stuff and I don't have any of the CC-54s. I
sure have a lot of stuff left over though. If anybody needs stuff, ask. I
have almost all of the parts for the flap mechanism and rear bench seat
since I did my own roof mounted flap system and went with rear bucket seats.
I also have some other stuff that must have been shipping mistakes or
something.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Keith
Leitch
Sent: Wednesday, February 28, 2007 12:15 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Torque Tube spacer CC-54

Thanks Mike!!!
--- Mike Kimball <mkimball@gci.net> wrote:

Let me check my left over parts box tonight. I'm
pretty sure I have some
extra ones.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com] On Behalf Of Keith
Leitch
Sent: Wednesday, February 28, 2007 11:27 AM
To: Murphy Rebel Builders
Subject: [rebel-builders] Torque Tube spacer CC-54

I think I forgot to send some of my parts over here
to
Hawaii. I am at Chapter 10.14.1 and it states to
install 1/2" sleeve (CC-54) onto the torque tube. I
can't find CC-54 in my parts bin and my have left it
with the fuselage kit that was shipped to Minnesota.
Does anyone have the demensions for this part so as
I
can make one. To me it seems to be nearly the same
as
CC-100. 2"ID x .120 tubing?

Keith
R661

____________________________________________________________________________

________
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail
beta.
http://new.mail.yahoo.com

-----------------------------------------------------------------

List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------
-----------------------------------------------------------------

List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------

____________________________________________________________________________
________
Get your own web address.
Have a HUGE year through Yahoo! Small Business.
http://smallbusiness.yahoo.com/domains/?p=BESTDEAL

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Dale Fultz · Post by **Dale Fultz** » Sun Feb 19, 2012 11:55 am

Mike,,, You got any CC-110's to sell it's the arm on the control tube or on
the end of the flap tube.. Dale SR-033 N269DF

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Mike Kimball · Post by **Mike Kimball** » Sun Feb 19, 2012 11:55 am

Yes I do. How many do you need? Give me an address and I'll get it(them)
to you.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Dale
Fultz
Sent: Monday, March 05, 2007 9:50 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Torque Tube spacer CC-54

Mike,,, You got any CC-110's to sell it's the arm on the control tube or on
the end of the flap tube.. Dale SR-033 N269DF

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Keith Leitch · Post by **Keith Leitch** » Sun Feb 19, 2012 11:55 am

Thanks for looking Mike. But, It looks like I will
just be putting them in storage and have to finish
them when I get them shipped back to MN in about a
year. I didn't have the forsight to realize I needed
the flapperons here to line up the horns on the torque
tube. SO I guess I will just stop construction until I
get moved back to MN. Plus there are a couple of other
small Items I don't have enough of here. Namely SS
rivets. I am headed back to MN in a month anyways for
the summer and if I order them they won't get here
until it is nearly time for me to leave. I may unpack
my stuff at my farm and just bring them back when I
return in the fall.

Keith
--- Mike Kimball <mkimball@gci.net> wrote:

Sorry. I looked through my stuff and I don't have
any of the CC-54s. I
sure have a lot of stuff left over though. If
anybody needs stuff, ask. I
have almost all of the parts for the flap mechanism
and rear bench seat
since I did my own roof mounted flap system and went
with rear bucket seats.
I also have some other stuff that must have been
shipping mistakes or
something.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com] On Behalf Of Keith
Leitch
Sent: Wednesday, February 28, 2007 12:15 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Torque Tube spacer
CC-54

Thanks Mike!!!
--- Mike Kimball <mkimball@gci.net> wrote:

Let me check my left over parts box tonight. I'm
pretty sure I have some
extra ones.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com] On Behalf Of Keith
Leitch
Sent: Wednesday, February 28, 2007 11:27 AM
To: Murphy Rebel Builders
Subject: [rebel-builders] Torque Tube spacer CC-54

I think I forgot to send some of my parts over
here
to
Hawaii. I am at Chapter 10.14.1 and it states to
install 1/2" sleeve (CC-54) onto the torque tube.
I
can't find CC-54 in my parts bin and my have left
it
with the fuselage kit that was shipped to
Minnesota.
Does anyone have the demensions for this part so
as
I
can make one. To me it seems to be nearly the same
as
CC-100. 2"ID x .120 tubing?

Keith
R661

____________________________________________________________________________

________
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail
beta.
http://new.mail.yahoo.com

-----------------------------------------------------------------

List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------
-----------------------------------------------------------------

List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------
____________________________________________________________________________

________
Get your own web address.
Have a HUGE year through Yahoo! Small Business.
http://smallbusiness.yahoo.com/domains/?p=BESTDEAL

-----------------------------------------------------------------

List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------
-----------------------------------------------------------------

List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------

____________________________________________________________________________________
Finding fabulous fares is fun.
Let Yahoo! FareChase search your favorite travel sites to find flight and hotel bargains.
http://farechase.yahoo.com/promo-generic-14795097

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

John Kramer · Post by **John Kramer** » Sun Feb 19, 2012 11:55 am

Mike (or anyone else),

Do you have any 2" X .035" aluminum tube (CC51 torque tube).

Thanks,

John...369R

At 12:31 PM 3/5/2007, you wrote:

Sorry. I looked through my stuff and I don't have any of the CC-54s. I
sure have a lot of stuff left over though. If anybody needs stuff, ask. I
have almost all of the parts for the flap mechanism and rear bench seat
since I did my own roof mounted flap system and went with rear bucket seats.
I also have some other stuff that must have been shipping mistakes or
something.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Keith
Leitch
Sent: Wednesday, February 28, 2007 12:15 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Torque Tube spacer CC-54

Thanks Mike!!!
--- Mike Kimball <mkimball@gci.net> wrote:

Let me check my left over parts box tonight. I'm
pretty sure I have some
extra ones.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com] On Behalf Of Keith
Leitch
Sent: Wednesday, February 28, 2007 11:27 AM
To: Murphy Rebel Builders
Subject: [rebel-builders] Torque Tube spacer CC-54

I think I forgot to send some of my parts over here
to
Hawaii. I am at Chapter 10.14.1 and it states to
install 1/2" sleeve (CC-54) onto the torque tube. I
can't find CC-54 in my parts bin and my have left it
with the fuselage kit that was shipped to Minnesota.
Does anyone have the demensions for this part so as
I
can make one. To me it seems to be nearly the same
as
CC-100. 2"ID x .120 tubing?

Keith
R661

____________________________________________________________________________
________
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail
beta.
http://new.mail.yahoo.com

-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------

____________________________________________________________________________
________
Get your own web address.
Have a HUGE year through Yahoo! Small Business.
http://smallbusiness.yahoo.com/domains/?p=BESTDEAL

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fly too low or too slow and the ground will rise up and smite thee.

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------