Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
[rebel-builders] Headliner - MAMs and Others
[rebel-builders] Headliner - MAMs and Others
I would like to have the pictures too...
Jean
Rebel 747R
Jean Poirier
Pr
Jean
Rebel 747R
Jean Poirier
Pr
[rebel-builders] Headliner - MAMs and Others
Gary
I have Murphy headliner, want to buy it off me ??
Mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Gary
Gustafson
Sent: Wednesday, February 21, 2007 10:29 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Headliner - MAMs and Others
I am thinking about headliners and the MAM headliner looks pretty good
in pictures. However, I am curious as to how much weight it adds to the
Rebel.
Also I am curious about other approaches like Johnson's below. I have
looked for pictures but do not find any. Could the Johnson's repost
pictures of their interior and any other people who have 'good' interiors
post to the website.
In 2003 Robert and Olga Johnson wrote the following in regard to a "home
build headliner
"Steve; There are many ways to go with a headliner- This is "homebuilding".
I have a rebel and I wanted something simple, easy to remove and functional.
The method I used was to rivet on 1" wide capstrips on all the roof chanels.
Cut 2" fire retardent flexible foam to fit into each area, Glue on fabric of
your choice, and insert. I have been very happy with this as it provides
three advantages. 1/ Easy to remove if you need to work or inspect a
particular area. 2/ Great insulation quality for both noise reduction and
keeping the heat out in the summer, and in when it gets cold. 3/ Looks good,
very inexpensive to do and very light weight. I originally was concerned
about possible absorbing moisture when the aluminum "sweats" with
temperature changes, but after two years no sign of this at all. If you
would like any additional information or pictures just let me know and I
will send direct to your home .-Bob Johnson Rebel "652" Flying, and having a
ball."
Another email indicates that pictures were posted, but there are none. If
those with alternative headliner approaches would post pictures, it would
be much appreciated.
Gary Gustafson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I have Murphy headliner, want to buy it off me ??
Mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Gary
Gustafson
Sent: Wednesday, February 21, 2007 10:29 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Headliner - MAMs and Others
I am thinking about headliners and the MAM headliner looks pretty good
in pictures. However, I am curious as to how much weight it adds to the
Rebel.
Also I am curious about other approaches like Johnson's below. I have
looked for pictures but do not find any. Could the Johnson's repost
pictures of their interior and any other people who have 'good' interiors
post to the website.
In 2003 Robert and Olga Johnson wrote the following in regard to a "home
build headliner
"Steve; There are many ways to go with a headliner- This is "homebuilding".
I have a rebel and I wanted something simple, easy to remove and functional.
The method I used was to rivet on 1" wide capstrips on all the roof chanels.
Cut 2" fire retardent flexible foam to fit into each area, Glue on fabric of
your choice, and insert. I have been very happy with this as it provides
three advantages. 1/ Easy to remove if you need to work or inspect a
particular area. 2/ Great insulation quality for both noise reduction and
keeping the heat out in the summer, and in when it gets cold. 3/ Looks good,
very inexpensive to do and very light weight. I originally was concerned
about possible absorbing moisture when the aluminum "sweats" with
temperature changes, but after two years no sign of this at all. If you
would like any additional information or pictures just let me know and I
will send direct to your home .-Bob Johnson Rebel "652" Flying, and having a
ball."
Another email indicates that pictures were posted, but there are none. If
those with alternative headliner approaches would post pictures, it would
be much appreciated.
Gary Gustafson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Headliner - MAMs and Others
Hi Gary: The site seams to be down at present, but as soon as I can get in I
will post pictures of the "Johnson" interior. - Bob J
----- Original Message -----
From: "Gary Gustafson" <gargus@adelphia.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 21, 2007 10:29 AM
Subject: [rebel-builders] Headliner - MAMs and Others
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
will post pictures of the "Johnson" interior. - Bob J
----- Original Message -----
From: "Gary Gustafson" <gargus@adelphia.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 21, 2007 10:29 AM
Subject: [rebel-builders] Headliner - MAMs and Others
I am thinking about headliners and the MAM headliner looks pretty good
in pictures. However, I am curious as to how much weight it adds to the
Rebel.
Also I am curious about other approaches like Johnson's below. I have
looked for pictures but do not find any. Could the Johnson's repost
pictures of their interior and any other people who have 'good' interiors
post to the website.
In 2003 Robert and Olga Johnson wrote the following in regard to a "home
build headliner
"Steve; There are many ways to go with a headliner- This is
"homebuilding".
I have a rebel and I wanted something simple, easy to remove and
functional.
The method I used was to rivet on 1" wide capstrips on all the roof
chanels.
Cut 2" fire retardent flexible foam to fit into each area, Glue on fabric
of
your choice, and insert. I have been very happy with this as it provides
three advantages. 1/ Easy to remove if you need to work or inspect a
particular area. 2/ Great insulation quality for both noise reduction and
keeping the heat out in the summer, and in when it gets cold. 3/ Looks
good,
very inexpensive to do and very light weight. I originally was concerned
about possible absorbing moisture when the aluminum "sweats" with
temperature changes, but after two years no sign of this at all. If you
would like any additional information or pictures just let me know and I
will send direct to your home .-Bob Johnson Rebel "652" Flying, and having
a
ball."
Another email indicates that pictures were posted, but there are none. If
those with alternative headliner approaches would post pictures, it would
be much appreciated.
Gary Gustafson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Headliner - MAMs and Others
Hey Mike,
The Rebel Headliner adds 12 LBS Total
Nancy
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Jones, Michael
Sent: Wednesday, February 21, 2007 9:10 AM
To: 'rebel-builders@dcsol.com'
Subject: RE: [rebel-builders] Headliner - MAMs and Others
Gary
I have Murphy headliner, want to buy it off me ??
Mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Gary Gustafson
Sent: Wednesday, February 21, 2007 10:29 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Headliner - MAMs and Others
I am thinking about headliners and the MAM headliner looks pretty good
in pictures. However, I am curious as to how much weight it adds to the
Rebel.
Also I am curious about other approaches like Johnson's below. I have
looked for pictures but do not find any. Could the Johnson's repost
pictures of their interior and any other people who have 'good'
interiors post to the website.
In 2003 Robert and Olga Johnson wrote the following in regard to a "home
build headliner
"Steve; There are many ways to go with a headliner- This is
"homebuilding".
I have a rebel and I wanted something simple, easy to remove and
functional.
The method I used was to rivet on 1" wide capstrips on all the roof
chanels.
Cut 2" fire retardent flexible foam to fit into each area, Glue on
fabric of your choice, and insert. I have been very happy with this as
it provides three advantages. 1/ Easy to remove if you need to work or
inspect a particular area. 2/ Great insulation quality for both noise
reduction and keeping the heat out in the summer, and in when it gets
cold. 3/ Looks good, very inexpensive to do and very light weight. I
originally was concerned about possible absorbing moisture when the
aluminum "sweats" with temperature changes, but after two years no sign
of this at all. If you would like any additional information or pictures
just let me know and I will send direct to your home .-Bob Johnson Rebel
"652" Flying, and having a ball."
Another email indicates that pictures were posted, but there are none.
If those with alternative headliner approaches would post pictures, it
would be much appreciated.
Gary Gustafson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
The Rebel Headliner adds 12 LBS Total
Nancy
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Jones, Michael
Sent: Wednesday, February 21, 2007 9:10 AM
To: 'rebel-builders@dcsol.com'
Subject: RE: [rebel-builders] Headliner - MAMs and Others
Gary
I have Murphy headliner, want to buy it off me ??
Mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Gary Gustafson
Sent: Wednesday, February 21, 2007 10:29 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Headliner - MAMs and Others
I am thinking about headliners and the MAM headliner looks pretty good
in pictures. However, I am curious as to how much weight it adds to the
Rebel.
Also I am curious about other approaches like Johnson's below. I have
looked for pictures but do not find any. Could the Johnson's repost
pictures of their interior and any other people who have 'good'
interiors post to the website.
In 2003 Robert and Olga Johnson wrote the following in regard to a "home
build headliner
"Steve; There are many ways to go with a headliner- This is
"homebuilding".
I have a rebel and I wanted something simple, easy to remove and
functional.
The method I used was to rivet on 1" wide capstrips on all the roof
chanels.
Cut 2" fire retardent flexible foam to fit into each area, Glue on
fabric of your choice, and insert. I have been very happy with this as
it provides three advantages. 1/ Easy to remove if you need to work or
inspect a particular area. 2/ Great insulation quality for both noise
reduction and keeping the heat out in the summer, and in when it gets
cold. 3/ Looks good, very inexpensive to do and very light weight. I
originally was concerned about possible absorbing moisture when the
aluminum "sweats" with temperature changes, but after two years no sign
of this at all. If you would like any additional information or pictures
just let me know and I will send direct to your home .-Bob Johnson Rebel
"652" Flying, and having a ball."
Another email indicates that pictures were posted, but there are none.
If those with alternative headliner approaches would post pictures, it
would be much appreciated.
Gary Gustafson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Headliner - MAMs and Others
Does it really weigh that much after it's all trimmed and fitted? I never
weighed the pieces...but I guess it would.
Besides...... for how it cleans up the interior...we...or at least I...
could stand to lose 12 lbs (or 25) anyhow.
----- Original Message -----
From: "Nancy Puff" <nancy@rotech.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 21, 2007 12:35 PM
Subject: RE: [rebel-builders] Headliner - MAMs and Others
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
weighed the pieces...but I guess it would.
Besides...... for how it cleans up the interior...we...or at least I...
could stand to lose 12 lbs (or 25) anyhow.
----- Original Message -----
From: "Nancy Puff" <nancy@rotech.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 21, 2007 12:35 PM
Subject: RE: [rebel-builders] Headliner - MAMs and Others
Hey Mike,
The Rebel Headliner adds 12 LBS Total
Nancy
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Jones, Michael
Sent: Wednesday, February 21, 2007 9:10 AM
To: 'rebel-builders@dcsol.com'
Subject: RE: [rebel-builders] Headliner - MAMs and Others
Gary
I have Murphy headliner, want to buy it off me ??
Mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Gary Gustafson
Sent: Wednesday, February 21, 2007 10:29 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Headliner - MAMs and Others
I am thinking about headliners and the MAM headliner looks pretty good
in pictures. However, I am curious as to how much weight it adds to the
Rebel.
Also I am curious about other approaches like Johnson's below. I have
looked for pictures but do not find any. Could the Johnson's repost
pictures of their interior and any other people who have 'good'
interiors post to the website.
In 2003 Robert and Olga Johnson wrote the following in regard to a "home
build headliner
"Steve; There are many ways to go with a headliner- This is
"homebuilding".
I have a rebel and I wanted something simple, easy to remove and
functional.
The method I used was to rivet on 1" wide capstrips on all the roof
chanels.
Cut 2" fire retardent flexible foam to fit into each area, Glue on
fabric of your choice, and insert. I have been very happy with this as
it provides three advantages. 1/ Easy to remove if you need to work or
inspect a particular area. 2/ Great insulation quality for both noise
reduction and keeping the heat out in the summer, and in when it gets
cold. 3/ Looks good, very inexpensive to do and very light weight. I
originally was concerned about possible absorbing moisture when the
aluminum "sweats" with temperature changes, but after two years no sign
of this at all. If you would like any additional information or pictures
just let me know and I will send direct to your home .-Bob Johnson Rebel
"652" Flying, and having a ball."
Another email indicates that pictures were posted, but there are none.
If those with alternative headliner approaches would post pictures, it
would be much appreciated.
Gary Gustafson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Headliner - MAMs and Others
Hi Wayne,
That is indeed after trimming it
Murphy Cuts them in house
Nancy Puff
Parts & Shipping Department
Rotech Research Canada
www.rotech.ca
250-260-6299
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, February 21, 2007 10:06 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Headliner - MAMs and Others
Does it really weigh that much after it's all trimmed and fitted? I
never weighed the pieces...but I guess it would.
Besides...... for how it cleans up the interior...we...or at least I...
could stand to lose 12 lbs (or 25) anyhow.
----- Original Message -----
From: "Nancy Puff" <nancy@rotech.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 21, 2007 12:35 PM
Subject: RE: [rebel-builders] Headliner - MAMs and Others
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
That is indeed after trimming it
Murphy Cuts them in house
Nancy Puff
Parts & Shipping Department
Rotech Research Canada
www.rotech.ca
250-260-6299
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, February 21, 2007 10:06 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Headliner - MAMs and Others
Does it really weigh that much after it's all trimmed and fitted? I
never weighed the pieces...but I guess it would.
Besides...... for how it cleans up the interior...we...or at least I...
could stand to lose 12 lbs (or 25) anyhow.
----- Original Message -----
From: "Nancy Puff" <nancy@rotech.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 21, 2007 12:35 PM
Subject: RE: [rebel-builders] Headliner - MAMs and Others
theHey Mike,
The Rebel Headliner adds 12 LBS Total
Nancy
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Jones, Michael
Sent: Wednesday, February 21, 2007 9:10 AM
To: 'rebel-builders@dcsol.com'
Subject: RE: [rebel-builders] Headliner - MAMs and Others
Gary
I have Murphy headliner, want to buy it off me ??
Mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Gary Gustafson
Sent: Wednesday, February 21, 2007 10:29 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Headliner - MAMs and Others
I am thinking about headliners and the MAM headliner looks pretty good
in pictures. However, I am curious as to how much weight it adds to
"homeRebel.
Also I am curious about other approaches like Johnson's below. I have
looked for pictures but do not find any. Could the Johnson's repost
pictures of their interior and any other people who have 'good'
interiors post to the website.
In 2003 Robert and Olga Johnson wrote the following in regard to a
signbuild headliner
"Steve; There are many ways to go with a headliner- This is
"homebuilding".
I have a rebel and I wanted something simple, easy to remove and
functional.
The method I used was to rivet on 1" wide capstrips on all the roof
chanels.
Cut 2" fire retardent flexible foam to fit into each area, Glue on
fabric of your choice, and insert. I have been very happy with this as
it provides three advantages. 1/ Easy to remove if you need to work or
inspect a particular area. 2/ Great insulation quality for both noise
reduction and keeping the heat out in the summer, and in when it gets
cold. 3/ Looks good, very inexpensive to do and very light weight. I
originally was concerned about possible absorbing moisture when the
aluminum "sweats" with temperature changes, but after two years no
picturesof this at all. If you would like any additional information or
Rebeljust let me know and I will send direct to your home .-Bob Johnson
"652" Flying, and having a ball."
Another email indicates that pictures were posted, but there are none.
If those with alternative headliner approaches would post pictures, it
would be much appreciated.
Gary Gustafson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Headliner - MAMs and Others
Okay..'cause they sure didn't before, requiring lots of cutting/fitting to
install it nicely.
----- Original Message -----
From: "Nancy Puff" <nancy@rotech.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 21, 2007 1:17 PM
Subject: RE: [rebel-builders] Headliner - MAMs and Others
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
install it nicely.
----- Original Message -----
From: "Nancy Puff" <nancy@rotech.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 21, 2007 1:17 PM
Subject: RE: [rebel-builders] Headliner - MAMs and Others
Hi Wayne,
That is indeed after trimming it
Murphy Cuts them in house
Nancy Puff
Parts & Shipping Department
Rotech Research Canada
www.rotech.ca
250-260-6299
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, February 21, 2007 10:06 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Headliner - MAMs and Others
Does it really weigh that much after it's all trimmed and fitted? I
never weighed the pieces...but I guess it would.
Besides...... for how it cleans up the interior...we...or at least I...
could stand to lose 12 lbs (or 25) anyhow.
----- Original Message -----
From: "Nancy Puff" <nancy@rotech.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 21, 2007 12:35 PM
Subject: RE: [rebel-builders] Headliner - MAMs and Others
theHey Mike,
The Rebel Headliner adds 12 LBS Total
Nancy
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Jones, Michael
Sent: Wednesday, February 21, 2007 9:10 AM
To: 'rebel-builders@dcsol.com'
Subject: RE: [rebel-builders] Headliner - MAMs and Others
Gary
I have Murphy headliner, want to buy it off me ??
Mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Gary Gustafson
Sent: Wednesday, February 21, 2007 10:29 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Headliner - MAMs and Others
I am thinking about headliners and the MAM headliner looks pretty good
in pictures. However, I am curious as to how much weight it adds to"homeRebel.
Also I am curious about other approaches like Johnson's below. I have
looked for pictures but do not find any. Could the Johnson's repost
pictures of their interior and any other people who have 'good'
interiors post to the website.
In 2003 Robert and Olga Johnson wrote the following in regard to asignbuild headliner
"Steve; There are many ways to go with a headliner- This is
"homebuilding".
I have a rebel and I wanted something simple, easy to remove and
functional.
The method I used was to rivet on 1" wide capstrips on all the roof
chanels.
Cut 2" fire retardent flexible foam to fit into each area, Glue on
fabric of your choice, and insert. I have been very happy with this as
it provides three advantages. 1/ Easy to remove if you need to work or
inspect a particular area. 2/ Great insulation quality for both noise
reduction and keeping the heat out in the summer, and in when it gets
cold. 3/ Looks good, very inexpensive to do and very light weight. I
originally was concerned about possible absorbing moisture when the
aluminum "sweats" with temperature changes, but after two years nopicturesof this at all. If you would like any additional information orRebeljust let me know and I will send direct to your home .-Bob Johnson"652" Flying, and having a ball."
Another email indicates that pictures were posted, but there are none.
If those with alternative headliner approaches would post pictures, it
would be much appreciated.
Gary Gustafson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Headliner - MAMs and Others
Why are you selling it?
Jean Poirier
Pr
Jean Poirier
Pr
[rebel-builders] Headliner - MAMs and Others
Hello Mike 007
Where are you located and how much?
Jean
Rebel 747R
On Wed Feb 21 18:21 , 'mike jones' <mfjones001@cogeco.ca> sent:
[quote]Just don
Where are you located and how much?
Jean
Rebel 747R
On Wed Feb 21 18:21 , 'mike jones' <mfjones001@cogeco.ca> sent:
[quote]Just don
[rebel-builders] Headliner - MAMs and Others
That would be much appreciated. Look forward to seeing them.
Gary
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Robert
Johnson
Sent: Wednesday, February 21, 2007 11:54 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Headliner - MAMs and Others
Hi Gary: The site seams to be down at present, but as soon as I can get in I
will post pictures of the "Johnson" interior. - Bob J
----- Original Message -----
From: "Gary Gustafson" <gargus@adelphia.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 21, 2007 10:29 AM
Subject: [rebel-builders] Headliner - MAMs and Others
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Gary
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Robert
Johnson
Sent: Wednesday, February 21, 2007 11:54 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Headliner - MAMs and Others
Hi Gary: The site seams to be down at present, but as soon as I can get in I
will post pictures of the "Johnson" interior. - Bob J
----- Original Message -----
From: "Gary Gustafson" <gargus@adelphia.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 21, 2007 10:29 AM
Subject: [rebel-builders] Headliner - MAMs and Others
I am thinking about headliners and the MAM headliner looks pretty good
in pictures. However, I am curious as to how much weight it adds to the
Rebel.
Also I am curious about other approaches like Johnson's below. I have
looked for pictures but do not find any. Could the Johnson's repost
pictures of their interior and any other people who have 'good' interiors
post to the website.
In 2003 Robert and Olga Johnson wrote the following in regard to a "home
build headliner
"Steve; There are many ways to go with a headliner- This is
"homebuilding".
I have a rebel and I wanted something simple, easy to remove and
functional.
The method I used was to rivet on 1" wide capstrips on all the roof
chanels.
Cut 2" fire retardent flexible foam to fit into each area, Glue on fabric
of
your choice, and insert. I have been very happy with this as it provides
three advantages. 1/ Easy to remove if you need to work or inspect a
particular area. 2/ Great insulation quality for both noise reduction and
keeping the heat out in the summer, and in when it gets cold. 3/ Looks
good,
very inexpensive to do and very light weight. I originally was concerned
about possible absorbing moisture when the aluminum "sweats" with
temperature changes, but after two years no sign of this at all. If you
would like any additional information or pictures just let me know and I
will send direct to your home .-Bob Johnson Rebel "652" Flying, and having
a
ball."
Another email indicates that pictures were posted, but there are none. If
those with alternative headliner approaches would post pictures, it would
be much appreciated.
Gary Gustafson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Headliner - MAMs and Others
I might be interested, but first I would like to field all the responses
to my initial email. If you would, could you please state the reason that
you are selling the headliner? Second, is it in new condition or have
you tried to install it. If you would like you can reply to me off-line
Thanking you in advance for your reply.
Gary Gustafson
gargus@adelphia.net
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jones,
Michael
Sent: Wednesday, February 21, 2007 12:10 PM
To: 'rebel-builders@dcsol.com'
Subject: RE: [rebel-builders] Headliner - MAMs and Others
Gary
I have Murphy headliner, want to buy it off me ??
Mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Gary
Gustafson
Sent: Wednesday, February 21, 2007 10:29 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Headliner - MAMs and Others
I am thinking about headliners and the MAM headliner looks pretty good
in pictures. However, I am curious as to how much weight it adds to the
Rebel.
Also I am curious about other approaches like Johnson's below. I have
looked for pictures but do not find any. Could the Johnson's repost
pictures of their interior and any other people who have 'good' interiors
post to the website.
In 2003 Robert and Olga Johnson wrote the following in regard to a "home
build headliner
"Steve; There are many ways to go with a headliner- This is "homebuilding".
I have a rebel and I wanted something simple, easy to remove and functional.
The method I used was to rivet on 1" wide capstrips on all the roof chanels.
Cut 2" fire retardent flexible foam to fit into each area, Glue on fabric of
your choice, and insert. I have been very happy with this as it provides
three advantages. 1/ Easy to remove if you need to work or inspect a
particular area. 2/ Great insulation quality for both noise reduction and
keeping the heat out in the summer, and in when it gets cold. 3/ Looks good,
very inexpensive to do and very light weight. I originally was concerned
about possible absorbing moisture when the aluminum "sweats" with
temperature changes, but after two years no sign of this at all. If you
would like any additional information or pictures just let me know and I
will send direct to your home .-Bob Johnson Rebel "652" Flying, and having a
ball."
Another email indicates that pictures were posted, but there are none. If
those with alternative headliner approaches would post pictures, it would
be much appreciated.
Gary Gustafson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
to my initial email. If you would, could you please state the reason that
you are selling the headliner? Second, is it in new condition or have
you tried to install it. If you would like you can reply to me off-line
Thanking you in advance for your reply.
Gary Gustafson
gargus@adelphia.net
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jones,
Michael
Sent: Wednesday, February 21, 2007 12:10 PM
To: 'rebel-builders@dcsol.com'
Subject: RE: [rebel-builders] Headliner - MAMs and Others
Gary
I have Murphy headliner, want to buy it off me ??
Mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Gary
Gustafson
Sent: Wednesday, February 21, 2007 10:29 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Headliner - MAMs and Others
I am thinking about headliners and the MAM headliner looks pretty good
in pictures. However, I am curious as to how much weight it adds to the
Rebel.
Also I am curious about other approaches like Johnson's below. I have
looked for pictures but do not find any. Could the Johnson's repost
pictures of their interior and any other people who have 'good' interiors
post to the website.
In 2003 Robert and Olga Johnson wrote the following in regard to a "home
build headliner
"Steve; There are many ways to go with a headliner- This is "homebuilding".
I have a rebel and I wanted something simple, easy to remove and functional.
The method I used was to rivet on 1" wide capstrips on all the roof chanels.
Cut 2" fire retardent flexible foam to fit into each area, Glue on fabric of
your choice, and insert. I have been very happy with this as it provides
three advantages. 1/ Easy to remove if you need to work or inspect a
particular area. 2/ Great insulation quality for both noise reduction and
keeping the heat out in the summer, and in when it gets cold. 3/ Looks good,
very inexpensive to do and very light weight. I originally was concerned
about possible absorbing moisture when the aluminum "sweats" with
temperature changes, but after two years no sign of this at all. If you
would like any additional information or pictures just let me know and I
will send direct to your home .-Bob Johnson Rebel "652" Flying, and having a
ball."
Another email indicates that pictures were posted, but there are none. If
those with alternative headliner approaches would post pictures, it would
be much appreciated.
Gary Gustafson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Headliner - MAMs and Others
How much are you asking and is it in the original packing boxes?
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of mike
jones
Sent: Wednesday, February 21, 2007 6:21 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Headliner - MAMs and Others
Just don
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of mike
jones
Sent: Wednesday, February 21, 2007 6:21 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Headliner - MAMs and Others
Just don
[rebel-builders] Headliner - MAMs and Others
Nice photo in the file section whoever posted it.. Gives me something to
think about.. Could work in the Moose.. Dale SR-033
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
think about.. Could work in the Moose.. Dale SR-033
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] Headliner - MAMs and Others
That is a nice photo and a nice job. Looks professional.
However, I have two questions of the photo.
First, I have 8 skylights in my Rebel and it seems that there
would be a lot of fitting to accommodate the skylights, preferably
having an angle or cone away from the skylight. I guess one could
hot wire cut cone shape openings for each skylight and make it
look just as nice. Looks as if you tried that a bit for the side
windows. I bet it is quiet in there.
Second questions is the door latch. I note a push button and a
key lock on the bottom of the wing fairing and latching mechanism
in the middle of the door frame. I am intrigued by what the mechanism
might be and how it works. Might you also post some pictures of
the door latch and explain how it works. I bet a lot of us are
scratching our heads about door latches for the top window (I am
nearly bald) and this might be useful to many of us.
Thank you (and a lot of others) for sharing hard gained knowledge.
Gary Gustafson
Rebel #242
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Dale
Fultz
Sent: Wednesday, February 21, 2007 7:55 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Headliner - MAMs and Others
Nice photo in the file section whoever posted it.. Gives me something to
think about.. Could work in the Moose.. Dale SR-033
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
However, I have two questions of the photo.
First, I have 8 skylights in my Rebel and it seems that there
would be a lot of fitting to accommodate the skylights, preferably
having an angle or cone away from the skylight. I guess one could
hot wire cut cone shape openings for each skylight and make it
look just as nice. Looks as if you tried that a bit for the side
windows. I bet it is quiet in there.
Second questions is the door latch. I note a push button and a
key lock on the bottom of the wing fairing and latching mechanism
in the middle of the door frame. I am intrigued by what the mechanism
might be and how it works. Might you also post some pictures of
the door latch and explain how it works. I bet a lot of us are
scratching our heads about door latches for the top window (I am
nearly bald) and this might be useful to many of us.
Thank you (and a lot of others) for sharing hard gained knowledge.
Gary Gustafson
Rebel #242
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Dale
Fultz
Sent: Wednesday, February 21, 2007 7:55 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Headliner - MAMs and Others
Nice photo in the file section whoever posted it.. Gives me something to
think about.. Could work in the Moose.. Dale SR-033
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------