On my SR 043, FUS-372 is .032 inch 6061-T6 and mine is trimmed to 5" x 36",
I'm not sure what it's original size was or how it was ID'd in the box as it
is now primed but not riveted in place.
Hope this helps.
Tom Packard
SR043
----- Original Message -----
From: "Jason Beall" <super_rebel131@yahoo.com>
To: "new list server" <rebel-builders@dcsol.com>
Sent: Sunday, February 04, 2007 1:02 PM
Subject: [rebel-builders] FUS-372 dash
Guys,
On my Moose fastbuild I have no FUS-372 (dash
extension under the forward part of the windshield)
listed on my inventory. Nor was it included on the
fuselage!? Am I missing something here? Is it to be
fabricated from raw stock, or am i potentially missing
a part?
Is it from stainless or aluminium? I may make my own
rather than wait for Murphy to send me a new one.
Anyone know the thickness and dimensions?
Thanks, -Jason
________________________________________________
Jason Beall
Super Rebel No. 131
Aberdeen, Scotland, UK
super_rebel131@yahoo.com
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
--- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
