If you go to following web site there is a lycoming aircraft engine guide
book for sale for 8.45 might be of help
http://www.buildersbooks.com/installation1.htm
mike#007
-----Original Message-----
From: list-server [mailto:list-server@dcsol.com]
Sent: Friday, August 18, 2000 12:01 AM
To: mjones@hatch.ca
Subject: murphy-rebel Digest for 17 Aug 2000
*---------------------------------------------------------------------------
--------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*---------------------------------------------------------------------------
--------*
murphy-rebel Digest for 17 Aug 2000
Topics covered in this issue include:
1: Trim Servo-wire connector source
by Terry McClary <tlmcclary@juno.com>
2: Rebel Ramble
by Coyote Flats Farms <coyote@ritzcom.net>
3: Re: Rebel Ramble
by Mike Davis <mike.davis@dcsol.com>
4: Re: Rebel Ramble
by Wray Thompson <wrayt@idirect.com>
5: Re: Rebel Ramble
by David Qualley <dqualley@home.com>
6: Re:0-320-E2D
by LisaFly99@aol.com
7: Re:0-320-E2D
by <LisaFly99@aol.com>
--------------------------------------------------------------------------
1 Message:0001 1
--------------------------------------------------------------------------
From: "Jones, Mike" <MJones@hatch.ca>
To: "'murphy-rebel@dcsol.com'" <murphy-rebel@dcsol.com>
Subject: rotax 100hp 912uls-4 for sale
Great to see the list back, it was really missed.
Now to business, I am considering selling my brand new 100hp rotax 912uls-4
engine. Any one interested let me know ??
Mike#007
-----Original Message-----
From: list-server [mailto:list-server@dcsol.com]
Sent: Thursday, August 17, 2000 12:01 AM
To: mjones@hatch.ca
Subject: murphy-rebel Digest for 16 Aug 2000
*---------------------------------------------------------------------------
--------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*---------------------------------------------------------------------------
--------*
murphy-rebel Digest for 16 Aug 2000
Topics covered in this issue include:
1: Back online!
by Mike Davis <mike.davis@dcsol.com>
2: Re: Hoisting Da Rebel
by Wayne G. O'Shea <oifa@irishfield.on.ca>
3: Back online!
by "Mike Davis" <mike.davis@dcsol.com>
4: Thanks
by Terry McClary <tlmcclary@juno.com>
5: Trim Servo-wire connector source
by Terry McClary <tlmcclary@juno.com>
--------------------------------------------------------------------------
1 Message:0001 1
--------------------------------------------------------------------------
To: murphy-rebel@dcsol.com
From: Mike Davis <mike.davis@dcsol.com>
Subject: Back online!
Just wanted to send everyone a note to let you know that the Murphy Rebel
mailing lists are back up and running. I've got it back on the original
server, now residing in Charlotte NC, graciously hosted by one of the
members of our list, Mr. Fred Darnell. I would just like to take a moment
to say thank you Fred for providing a home for this list.
I also want to apologize for the down time, I don't know about the rest of
you, but I went through some serious withdrawal! I sure miss having a
server totally under my own control. Fred's company, Biopop Integration
Group, looks to be a first class operation. So, as long as I can keep my
server running, I don't think we're likely to run into anymore network
problems.
That's all.... everybody start sharing that good information again!
Mike
--------------------------------------------------------------------------
2 Message:0002 2
--------------------------------------------------------------------------
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: "Builders List" <murphy-rebel@dcsol.com>
Subject: Re: Hoisting Da Rebel
-----Original Message-----
From: Wayne G. O'Shea <oifa@irishfield.on.ca>
To: Murphy Rebel Builders List <murphy-rebel@dcsol.com>
Date: Sunday, July 30, 2000 9:35 PM
Subject: Re: Hoisting Da Rebel
(whereRyan,
People have installed eyebolts in the main carrythrough, BIMHOpinion (for
what it's worth), this weakens the structure where you really don't want to
weaken it!
I lift the aircraft by removing the fairing at the carrythrough stubs
2forward wing spar attaches to the fuselage.) I lift by using approximately
-foot long cables with thimbles that are big enough for a 3/8th bolt. The
bolt is put below the carrythrough with a cable thimble for and aft of the
carrythrough. Tighten the bolt so that the cable assembly can't slip past
the wing attach bolt. I use 2 chain falls so the lift is straight up and
this is especially helpfull for getting things square on the initial
installation. You will need to do a balancing act or have a lift for the
tail also. I have a walk behind fork truck that I use to balance the tail
weight.
Blue skies,
Wayne G. O'Shea
www.irishfield.on.ca
-----Original Message-----
From: Ryan Amendala <longpup@hotmail.com>
To: murphy-rebel@dcsol.com <murphy-rebel@dcsol.com>
Date: Saturday, July 15, 2000 10:38 PM
Subject: Hoisting Da Rebel
whenAll,
Has anybody installed eye bolts to the fuslage to hoist the Rebel in order
to work on the floats? I believe this was a recent thread but with our
latest trip to the San Juan Islands (us/Canada), we saw lots of seaplanes
and they all had 4 eyebolts on the top of the fuse. Owners told us that
this was to hoist the plane in the air to work on bottom side of floatsnecessary. Just wondering what was out there
Ryan Amendala
Rebel, Working on controls, engine arrives next week.
Olympia, WA
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
*-------------------------------------------------------------------------
----------*The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*-------------------------------------------------------------------------
-----------------------------------------------------------------------------------*
3 Message:0003 3
--------------------------------------------------------------------------
From: "Roger & Alice Hoffman" <rognal@continet.com>
To: "Murphy Rebel Builders List" <murphy-rebel@dcsol.com>
Subject: Re: Back online!
Excellent! Thank you Mike! Thank you Fred! and Thank you Wray for the
temporary forum!
It's good to have the old list back. I just picked up my wing kit and know
I'll need all the help I can get from this list.
R. Hoffman #687R
Eugene, OR USA
----- Original Message -----
From: "Mike Davis" <mike.davis@dcsol.com>
To: <murphy-rebel@dcsol.com>
Cc: <flying-rebels@dcsol.com>; <rebel-ramble@dcsol.com>
Sent: Wednesday, August 16, 2000 8:16 AM
Subject: Back online!
*---------------------------------------------------------------------------Just wanted to send everyone a note to let you know that the Murphy Rebel
mailing lists are back up and running. I've got it back on the original
server, now residing in Charlotte NC, graciously hosted by one of the
members of our list, Mr. Fred Darnell. I would just like to take a moment
to say thank you Fred for providing a home for this list.
I also want to apologize for the down time, I don't know about the rest of
you, but I went through some serious withdrawal! I sure miss having a
server totally under my own control. Fred's company, Biopop Integration
Group, looks to be a first class operation. So, as long as I can keep my
server running, I don't think we're likely to run into anymore network
problems.
That's all.... everybody start sharing that good information again!
Mike
--------*
*---------------------------------------------------------------------------The Flying Rebels List is for the discussion between
builders and owners of complete/flying Murphy Rebel
aircraft. Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
--------*
--------------------------------------------------------------------------
4 Message:0004 4
--------------------------------------------------------------------------
To: murphy-rebel@dcsol.com
Subject: Thanks
From: Terry McClary <tlmcclary@juno.com>
I would also like to thank Mike, Fred and Wray for their efforts on the
Rebel forum. Yes, I was starting to experience withdrawals. Call me
crazy but I like to know about problems before I get there and make them
myself.
Terry McClary
--------------------------------------------------------------------------
5 Message:0005 5
--------------------------------------------------------------------------
To: murphy-rebel@dcsol.com
Subject: Trim Servo-wire connector source
From: Terry McClary <tlmcclary@juno.com>
Before the server went down there was a brief exchange on connectors. I
promised to respond with additional data but the message was returned. I
responded privately to the initial authors but saved the message to put
out for the rest of the group.
Terry
-----------
On Sun, 23 Jul 2000 09:51:54 EDT Terry McClary writes:
Richard,
Sorry for the delay in finding you an answer. Unfortunately the
responsibility for cables has been "outsourced" to a supplier and I
couldn't find the reference materials I was looking for.
After I read David Fife's message though I thought he is right in
his approach. Years ago when I worked at Grimes (aircraft lighting)
we used Molex connectors, Whelen ships Molex connectors on and with
their products and the other day when I was looking through the
flying clubs Cessna 172 I saw several Molex connectors in use. They
have been in use on "certified" products for many years so they
should serve us well.
So you don't have to shop through a bunch of hobby shops, try
Digi-Key. I have a 1996 catalog that has a good assortment of crimp
or soldr pin, single or multi-pin connectors.
The catalog lists a website at http://www.digikey.com or a telephone
number of 800.344.4539. There was no minimum order but there was an
adder if the order is less than $25.
I accessed the webite while I was putting this message together to
make sure I wasn't giving you out dated information. Digi-Key gives
you a choice of a US or Canadian website so most of us should be
able to order without a customs hassle. The site has a catalog,
stock status, and an on-line order form.
Hope this helps,
Terry McClary
On Thu, 13 Jul 2000 16:12:29 -0700 (PDT) David Fife writes:
Richard,
I recently red your message re: connectors. In the
past I have used a "molex"connector. These are used
on radio controlled airplanes and cars. They are
available through hobby shops. Cost about 6.00 a
pair. Give it a try.
=====
Sincerely,
David K. Fife
3D Composite Aircraft Parts Inc.
1345 Merkle St.
Ortonville, MI. 48462
Phone 248-627-4367
EOM
NOTICE - This message is the property of HATCH. It may also be confidential
and/or privileged. If you are not the intended recipient of this message
you are hereby notified that you must not disseminate, copy or take any
action with respect to it. If you have received this message in error
please notify HATCH immediately via mailto:MailAdmin@hatch.ca.
--------------------------------------------------------------------------
2 Message:0002 2
--------------------------------------------------------------------------
To: murphy-rebel@dcsol.com
From: Coyote Flats Farms <coyote@ritzcom.net>
Subject: Rebel Ramble
Where can I go to find out how the Ramble went?
Tim Smith
No Rebel yet, still pinching my pennies!
--------------------------------------------------------------------------
3 Message:0003 3
--------------------------------------------------------------------------
To: <murphy-rebel@dcsol.com> (Murphy Rebel Builders List)
From: Mike Davis <mike.davis@dcsol.com>
Subject: Re: Rebel Ramble
I would imagine once Bob Patterson is done galavanting around the country
in the factory Super Rebel he'll give us a full report.
Mike
At 06:23 AM 8/17/00 -0700, you wrote:
---------*Where can I go to find out how the Ramble went?
Tim Smith
No Rebel yet, still pinching my pennies!
*--------------------------------------------------------------------------
---------*The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*--------------------------------------------------------------------------
--------------------------------------------------------------------------
4 Message:0004 4
--------------------------------------------------------------------------
From: Wray Thompson <wrayt@idirect.com>
To: " (Murphy Rebel Builders List)" <murphy-rebel@dcsol.com>
Subject: Re: Rebel Ramble
Tim if you go to my home page and click on the button for the forum you can
see a short
blurb Bob posted (the forum was a temporary for the Rebel until Mike
returned) Bob did
promise a more detailed report when he gets back from his current jaunt.
Coyote Flats Farms wrote:
*---------------------------------------------------------------------------Where can I go to find out how the Ramble went?
Tim Smith
No Rebel yet, still pinching my pennies!
--------*
*---------------------------------------------------------------------------The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
--------*
--
Wray Thompson ...Rebel 306 ...home page http://webhome.idirect.com/~wrayt/
My ICQ number is 29764664
--------------------------------------------------------------------------
5 Message:0005 5
--------------------------------------------------------------------------
From: David Qualley <dqualley@home.com>
To: " (Murphy Rebel Builders List)" <murphy-rebel@dcsol.com>
Subject: Re: Rebel Ramble
I have a couple photos from the Ramble at the Chilliwack Airport, and at the
BBQ at Daryl's
house..
http://members.home.com/dqualley/RebelRamble/
Dave
Wray Thompson wrote:
can see a shortTim if you go to my home page and click on the button for the forum you
returned) Bob didblurb Bob posted (the forum was a temporary for the Rebel until Mike
*---------------------------------------------------------------------------promise a more detailed report when he gets back from his current jaunt.
Coyote Flats Farms wrote:
Where can I go to find out how the Ramble went?
Tim Smith
No Rebel yet, still pinching my pennies!
--------*
*---------------------------------------------------------------------------The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
--------*
*-----------------------------------------------------------------------------
Wray Thompson ...Rebel 306 ...home page http://webhome.idirect.com/~wrayt/
My ICQ number is 29764664
--------*
*---------------------------------------------------------------------------The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
--------*
--------------------------------------------------------------------------
6 Message:0006 6
--------------------------------------------------------------------------
From: LisaFly99@aol.com
Subject: Re:0-320-E2D
To: murphy-rebel@dcsol.com
Group
Would like some insight, pros&cons on Lyc. 0-320-E2D. Came out of a C-172.
Or
a Web sight with the differences on the 0-320 engines.
Phil&Lisa Smith #460 N414D THANKS
--------------------------------------------------------------------------
7 Message:0007 7
--------------------------------------------------------------------------
From: "Lonnie Benson" <lonben@erols.com>
To: "Murphy Rebel Builders List" <murphy-rebel@dcsol.com>
Subject: Re: Re:0-320-E2D
You could try www.lycoming.textron.com . The O-320 "A" & "E" series engines
are low compression 140/150 HP. The O-320 E2D is 150 HP, at 2700 RPM, was
designed to use 80/87 avgas, has a 7.00:1 compression ratio, and has a
dynafocal mount. They us the 0-235 front bearing setup, that is they use
two separate bearings where the crankshaft leaves the engine, instead of the
one large bearimg used on some other models. They normally have Slick mags.
Besure to get the carburetor etc with it. I hope this is of some help.
Lonnie
----- Original Message -----
From: <LisaFly99@aol.com>
To: <murphy-rebel@dcsol.com>
Sent: Thursday, August 17, 2000 9:47 PM
Subject: Re:0-320-E2D
OrGroup
Would like some insight, pros&cons on Lyc. 0-320-E2D. Came out of a C-172.
*---------------------------------------------------------------------------a Web sight with the differences on the 0-320 engines.
Phil&Lisa Smith #460 N414D THANKS
--------*
*---------------------------------------------------------------------------The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
--------*
EOM
NOTICE - This message is the property of HATCH. It may also be confidential
and/or privileged. If you are not the intended recipient of this message
you are hereby notified that you must not disseminate, copy or take any
action with respect to it. If you have received this message in error
please notify HATCH immediately via mailto:MailAdmin@hatch.ca.
*-----------------------------------------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*-----------------------------------------------------------------------------------*
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
