[rebel-builders]total tail height?

[british thunder]

does any one know the height to the tip of the rudder when the plan is on
amphibs?
or how high the door has to be to get in the garage?
I just bought a new place with a 30 x 40 shop but the ceiling is only 10'.
thanks.
Cec
014R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Charlie Starr]

Don't have a good figure for a Rebel tail height on floats, but bet there's
lots out there that can give you a pretty good idea. I had a 180 on
"anphibs" next door to me in NJ and he had to have a special rig built to go
under the front wheels when pushing in hanger with a 14 foot bi-fold door,
to lower the tail height - may not have opened to the full 14', however.

Charlie Starr SR N96CS
----- Original Message -----
From: "british thunder" <britishthunder@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 2:56 PM
Subject: Re: [rebel-builders]total tail height?

does any one know the height to the tip of the rudder when the plan is on
amphibs?
or how high the door has to be to get in the garage?
I just bought a new place with a 30 x 40 shop but the ceiling is only 10'.
thanks.
Cec
014R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.15.15/581 - Release Date: 12/9/2006

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

I can't measure as everything in the hangar is either on blocks or off
floats...but if memory serves me correctly 9' 8" rings a bell...but be
forwarned...if you have antennas on the top of your cabin they are higher
than the fin ! They should still come thru a 10' door.

Wayne

----- Original Message -----
From: "british thunder" <britishthunder@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 3:56 PM
Subject: Re: [rebel-builders]total tail height?

does any one know the height to the tip of the rudder when the plan is on
amphibs?
or how high the door has to be to get in the garage?
I just bought a new place with a 30 x 40 shop but the ceiling is only 10'.
thanks.
Cec
014R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[WALTER KLATT]

Is the whole ceiling 10' or just the door? My Rebel on amphibs is just under 10' at the top of the tail. That is with a 2.5" float angle. Someday I want to change mine to 3.0" which should lower my tail even further. Then there are some that have shortened the main float struts to get even lower.

Walter

----- Original Message -----
From: british thunder <britishthunder@sympatico.ca>
Date: Monday, December 11, 2006 12:56 pm
Subject: Re: [rebel-builders]total tail height?

does any one know the height to the tip of the rudder when the
plan is on
amphibs?
or how high the door has to be to get in the garage?
I just bought a new place with a 30 x 40 shop but the ceiling is
only 10'.
thanks.
Cec
014R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[british thunder]

thanks for the reply
wont know the total specks until I close in Jan. Hoping it will fit.
She wants a new kitchen I want a hanger door first, we'll see who wins?
Cec
014R

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 3:53 PM
Subject: Re: [rebel-builders]total tail height?

I can't measure as everything in the hangar is either on blocks or off
floats...but if memory serves me correctly 9' 8" rings a bell...but be
forwarned...if you have antennas on the top of your cabin they are higher
than the fin ! They should still come thru a 10' door.

Wayne

----- Original Message -----
From: "british thunder" <britishthunder@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 3:56 PM
Subject: Re: [rebel-builders]total tail height?

does any one know the height to the tip of the rudder when the plan is

on

amphibs?
or how high the door has to be to get in the garage?
I just bought a new place with a 30 x 40 shop but the ceiling is only

10'.

thanks.
Cec
014R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

With no reply to my other email I presume she's not buying you skis for
under the tree.....


----- Original Message -----
From: "british thunder" <britishthunder@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 7:11 PM
Subject: Re: [rebel-builders]total tail height?

thanks for the reply
wont know the total specks until I close in Jan. Hoping it will fit.
She wants a new kitchen I want a hanger door first, we'll see who wins?
Cec
014R

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 3:53 PM
Subject: Re: [rebel-builders]total tail height?

I can't measure as everything in the hangar is either on blocks or off
floats...but if memory serves me correctly 9' 8" rings a bell...but be
forwarned...if you have antennas on the top of your cabin they are higher
than the fin ! They should still come thru a 10' door.

Wayne

----- Original Message -----
From: "british thunder" <britishthunder@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 3:56 PM
Subject: Re: [rebel-builders]total tail height?

does any one know the height to the tip of the rudder when the plan is

on

amphibs?
or how high the door has to be to get in the garage?
I just bought a new place with a 30 x 40 shop but the ceiling is only

10'.

thanks.
Cec
014R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[NormIsler]

My vote is that the new kitchen will go in first.

Just seems to be the way things go!

Norm
Elite 702E




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Keith Leitch]

Cec,

I believe it you search the archives you should find
your answer as I asked the same thing many moons ago.
I have 14' walls but my bi-fold door opens to 11'6"
and I remember that was plenty.

Keith R661


--- british thunder <britishthunder@sympatico.ca>
wrote:

thanks for the reply
wont know the total specks until I close in Jan.
Hoping it will fit.
She wants a new kitchen I want a hanger door first,
we'll see who wins?
Cec
014R

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 3:53 PM
Subject: Re: [rebel-builders]total tail height?

I can't measure as everything in the hangar is

either on blocks or off

floats...but if memory serves me correctly 9' 8"

rings a bell...but be

forwarned...if you have antennas on the top of

your cabin they are higher

than the fin ! They should still come thru a 10'

door.

Wayne

----- Original Message -----
From: "british thunder"

<britishthunder@sympatico.ca>

To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 3:56 PM
Subject: Re: [rebel-builders]total tail height?

does any one know the height to the tip of the

rudder when the plan is
on

amphibs?
or how high the door has to be to get in the

garage?

I just bought a new place with a 30 x 40 shop

but the ceiling is only
10'.

thanks.
Cec
014R

-----------------------------------------------------------------

List archives located at:

https://mail.dcsol.com/login

username "rebel" password "builder"
Unsubscribe:

rebel-builders-unsubscribe@dcsol.com

List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------
-----------------------------------------------------------------

List archives located at:

https://mail.dcsol.com/login

username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------
-----------------------------------------------------------------

List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------




____________________________________________________________________________________
Have a burning question?
Go to www.Answers.yahoo.com and get answers from real people who know.



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Keith Leitch]

Norm, LOL I was thinking the same thing. For some
reason the women have a way of winning these battles
99% of the time.

--- NormIsler@aol.com wrote:

My vote is that the new kitchen will go in first.

Just seems to be the way things go!

Norm
Elite 702E

-----------------------------------------------------------------

List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------




____________________________________________________________________________________
Any questions? Get answers on any topic at www.Answers.yahoo.com. Try it now.



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Dale Fultz]

I would agree with Norm he will probably be looking for cabinet measurements
before he needs the door opening done... but it never hurts to dream.. Dale
SR-033




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

U guys all marry the wrong gal or what?? I put my 2000' runway in
first...built my 50' x 100' x 16'h hangar second...30 x 60 shop third and
the house...well we'll get'r finished up someday! LOL

----- Original Message -----
From: "Dale Fultz" <dfultz17086@earthlink.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 7:41 PM
Subject: Re: [rebel-builders]total tail height?

I would agree with Norm he will probably be looking for cabinet
measurements
before he needs the door opening done... but it never hurts to dream..
Dale
SR-033




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Charlie Starr]

Hanger, of course - you can always eat in the hanger, but it's hard to build
in the kitchen.

Charlie Starr
SR - N96CS
----- Original Message -----
From: "british thunder" <britishthunder@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 6:11 PM
Subject: Re: [rebel-builders]total tail height?

thanks for the reply
wont know the total specks until I close in Jan. Hoping it will fit.
She wants a new kitchen I want a hanger door first, we'll see who wins?
Cec
014R

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 3:53 PM
Subject: Re: [rebel-builders]total tail height?

I can't measure as everything in the hangar is either on blocks or off
floats...but if memory serves me correctly 9' 8" rings a bell...but be
forwarned...if you have antennas on the top of your cabin they are higher
than the fin ! They should still come thru a 10' door.

Wayne

----- Original Message -----
From: "british thunder" <britishthunder@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 3:56 PM
Subject: Re: [rebel-builders]total tail height?

does any one know the height to the tip of the rudder when the plan is

on

amphibs?
or how high the door has to be to get in the garage?
I just bought a new place with a 30 x 40 shop but the ceiling is only

10'.

thanks.
Cec
014R




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.15.15/581 - Release Date: 12/9/2006

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[NormIsler]

Of course, you can sleep in the hanger as well!

Norm (Kitchen Was Done First) Isler
Elite 702E




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[british thunder]

ALREADY MEASURED FOR CABINETS.
BUT CHECKING ON BEAM FOR ABOVE THE DOOR, WOULD LIKE TO SPAN 35 FEET?
NOT SURE WHAT SIZE BEAM I NEED? THAT WILL DETERMINE HOW HIGH I NEED TO RAISE
THE ROOF OR COME IN THE SIDE OF THE GARAGE.
BETS ARE BEING TAKEN.
TRYING TO TRADE STRAIGHT FLOATS FOR SKIES AND CASH FOR HANGER DOOR SO I CAN
GET BACK IN THE AIR THIS WINTER.
MAY HAVE TO PUT THE STORAGE OIL IN IT SOON.
MY BET IS ON THE DOOR BEING COMPLETED BEFORE THE KITCHEN IS DONE.
THE GARAGE/HANGER HAS A FULL BATHROOM AND FURNACES IN IT ALREADY, NO WORRIES
ABOUT LIVING THERE FOR A WHOLE.
GO FIGURE I GOT THIS PLACE BECAUSE OF A DIVORCE?????
4 WEEKS TO GO.
CEC
014R

----- Original Message -----
From: "Dale Fultz" <dfultz17086@earthlink.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 11, 2006 6:41 PM
Subject: Re: [rebel-builders]total tail height?

I would agree with Norm he will probably be looking for cabinet

measurements

before he needs the door opening done... but it never hurts to dream..

Dale

SR-033




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------