Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] Covering Flapperons

Converted from Wildcat! database. (read only)
Locked
Jones, Michael

[rebel-builders] Covering Flapperons

Post by Jones, Michael » Sun Feb 19, 2012 11:16 am

the poly fiber manual has all steps details and does not cost to much

thats what i am using for a reference, have you got an iron, what is it

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
pequeajim@dcsol.com
Sent: Monday, October 16, 2006 12:12 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Covering Flapperons


I did a search for some feedback on covering the Rebel flapperons and
happily
found some references to a step or two that is not detailed in the murphy
instructions. My question is that, although quite proficient at covering
large
model wings, some of the terms relating to the full scale covering are new
to
me.

Has anyone on here detailed step by step the covering process? I'm not
worried about getting it done, just about forgetting something that I should

have done that was not explained in the build manual.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

pequeajim

[rebel-builders] Covering Flapperons

Post by pequeajim » Sun Feb 19, 2012 11:16 am

Thanks Mike:

I have a fairly large iron that I used for covering my my 45% RC aircraft. It is
a bit bigger than the standard RC hobby irons. It will go to 400 degrees.

What do you use?

On 10/16/2006 8:21 AM, michael.jones@snclavalin.com wrote to rebel-
builders:

-> the poly fiber manual has all steps details and does not cost to much
->
-> thats what i am using for a reference, have you got an iron, what is it
->
-> mike#007
->
-> -----Original Message-----
-> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
-> pequeajim@dcsol.com
-> Sent: Monday, October 16, 2006 12:12 PM
-> To: rebel-builders@dcsol.com
-> Subject: [rebel-builders] Covering Flapperons
->
->
-> I did a search for some feedback on covering the Rebel flapperons and
-> happily
-> found some references to a step or two that is not detailed in the murphy
-> instructions. My question is that, although quite proficient at covering
-> large
-> model wings, some of the terms relating to the full scale covering are new
-> to
-> me.
->
-> Has anyone on here detailed step by step the covering process? I'm not
-> worried about getting it done, just about forgetting something that I should
->
-> have done that was not explained in the build manual.
->
->
->
-> -----------------------------------------------------------------
-> List archives located at: https://www.dcsol.com/login
-> username "rebel" password "builder"
-> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> List administrator: mike.davis@dcsol.com
-> -----------------------------------------------------------------
->
->
->





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Jones, Michael

[rebel-builders] Covering Flapperons

Post by Jones, Michael » Sun Feb 19, 2012 11:16 am

cant find iron that has no autoshut off and goes to 350, what is make of
yours

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
pequeajim@dcsol.com
Sent: Monday, October 16, 2006 12:53 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Covering Flapperons


Thanks Mike:

I have a fairly large iron that I used for covering my my 45% RC aircraft.
It is
a bit bigger than the standard RC hobby irons. It will go to 400 degrees.

What do you use?

On 10/16/2006 8:21 AM, michael.jones@snclavalin.com wrote to rebel-
builders:

-> the poly fiber manual has all steps details and does not cost to much
->
-> thats what i am using for a reference, have you got an iron, what is it
->
-> mike#007
->
-> -----Original Message-----
-> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
-> pequeajim@dcsol.com
-> Sent: Monday, October 16, 2006 12:12 PM
-> To: rebel-builders@dcsol.com
-> Subject: [rebel-builders] Covering Flapperons
->
->
-> I did a search for some feedback on covering the Rebel flapperons and
-> happily
-> found some references to a step or two that is not detailed in the murphy

-> instructions. My question is that, although quite proficient at covering
-> large
-> model wings, some of the terms relating to the full scale covering are
new
-> to
-> me.
->
-> Has anyone on here detailed step by step the covering process? I'm not
-> worried about getting it done, just about forgetting something that I
should
->
-> have done that was not explained in the build manual.
->
->
->
-> -----------------------------------------------------------------
-> List archives located at: https://www.dcsol.com/login
-> username "rebel" password "builder"
-> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> List administrator: mike.davis@dcsol.com
-> -----------------------------------------------------------------
->
->
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Drew Dalgleish

[rebel-builders] Covering Flapperons

Post by Drew Dalgleish » Sun Feb 19, 2012 11:16 am

Buy your mother a new one and steal her old one :) or check out garage
sales. I found that the old iron I have used for waxing skis since I was a
teenager (and it was old then) holds it's temperature within 5 degrees
after I calibrated it.

At 12:58 PM 10/16/2006 -0400, you wrote:
cant find iron that has no autoshut off and goes to 350, what is make of
yours

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
pequeajim@dcsol.com
Sent: Monday, October 16, 2006 12:53 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Covering Flapperons


Thanks Mike:

I have a fairly large iron that I used for covering my my 45% RC aircraft.
It is
a bit bigger than the standard RC hobby irons. It will go to 400 degrees.

What do you use?

On 10/16/2006 8:21 AM, michael.jones@snclavalin.com wrote to rebel-
builders:

-> the poly fiber manual has all steps details and does not cost to much
->
-> thats what i am using for a reference, have you got an iron, what is it
->
-> mike#007
->
-> -----Original Message-----
-> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
-> pequeajim@dcsol.com
-> Sent: Monday, October 16, 2006 12:12 PM
-> To: rebel-builders@dcsol.com
-> Subject: [rebel-builders] Covering Flapperons
->
->
-> I did a search for some feedback on covering the Rebel flapperons and
-> happily
-> found some references to a step or two that is not detailed in the murphy

-> instructions. My question is that, although quite proficient at covering
-> large
-> model wings, some of the terms relating to the full scale covering are
new
-> to
-> me.
->
-> Has anyone on here detailed step by step the covering process? I'm not
-> worried about getting it done, just about forgetting something that I
should
->
-> have done that was not explained in the build manual.
->
->
->
-> -----------------------------------------------------------------
-> List archives located at: https://www.dcsol.com/login
-> username "rebel" password "builder"
-> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> List administrator: mike.davis@dcsol.com
-> -----------------------------------------------------------------
->
->
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Drew Dalgleish

[rebel-builders] Covering Flapperons

Post by Drew Dalgleish » Sun Feb 19, 2012 11:16 am

At 08:11 AM 10/16/2006 -0800, you wrote:
I did a search for some feedback on covering the Rebel flapperons and
happily
found some references to a step or two that is not detailed in the murphy
instructions. My question is that, although quite proficient at covering
large
model wings, some of the terms relating to the full scale covering are new
to
me.

Has anyone on here detailed step by step the covering process? I'm not
worried about getting it done, just about forgetting something that I should
have done that was not explained in the build manual.
Fabric covering is easy. Just pick the system you want to use and follow
the manufacturers instructions.
Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Ken

[rebel-builders] Covering Flapperons

Post by Ken » Sun Feb 19, 2012 11:16 am

Yes you will want that Polyfiber covering manual if using polyfiber
products.

I used 3 quarts of silver and 4 quarts of the pink polybrush so a gallon
of each is probably the cheapest way to buy chemicals. The small can of
glue ( a pint I think) was way more than I needed.

You may want to purchase the necessary tapes as for me it was very time
consuming trying to get the 3" wide tape down smooth on the trailing
edge. MAM said to cut that from excess covering material but mine had
folds and creases in it that did not want to lay down flat. And the edge
of my homemade tape is a bit ragged.

An old clothes iron worked fine for me as well once calibrated with
their thermometer as per the polyfiber manual. And don't forget a few
vent washers or seaplane vents.

For anyone attending Oshkosh or Sun'n Fun, it is worth attending the
polyfiber covering workshop for a couple of hours of hands on experience
and to get the idea of how the process works. Nothing difficult about it
once you see it.

Ken

Drew Dalgleish wrote:
At 08:11 AM 10/16/2006 -0800, you wrote:

I did a search for some feedback on covering the Rebel flapperons and

happily

found some references to a step or two that is not detailed in the murphy
instructions. My question is that, although quite proficient at covering

large

model wings, some of the terms relating to the full scale covering are new

to

me.

Has anyone on here detailed step by step the covering process? I'm not
worried about getting it done, just about forgetting something that I should
have done that was not explained in the build manual.

Fabric covering is easy. Just pick the system you want to use and follow
the manufacturers instructions.
Drew





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

pequeajim

[rebel-builders] Covering Flapperons

Post by pequeajim » Sun Feb 19, 2012 11:16 am

Mine does not have an autoshutoff, but it does go to 350 degrees. I bought
it from hHorizon Hobbies about 6-7 years ago. It was called a Hanger 9 Giant
Scale iron and I don't believe they still make it, but you can check.

Here is the smaller Hanger 9 Iron

http://www.horizonhobby.com/Products/De ... dID=HAN135

Here's some from Hobby Lobby

http://www.hobby-lobby.com/heatgun.htm

And from Tower Hobbies

http://www2.towerhobbies.com/cgi-bin/wt ... XB361&P=ML

I looked around for you and could not find the larger ones. I will try tonight
and send you a link if I find it.

Jim!


On 10/16/2006 8:58 AM, michael.jones@snclavalin.com wrote to rebel-
builders:

-> cant find iron that has no autoshut off and goes to 350, what is make of
-> yours
->
-> -----Original Message-----
-> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
-> pequeajim@dcsol.com
-> Sent: Monday, October 16, 2006 12:53 PM
-> To: rebel-builders@dcsol.com
-> Subject: RE: [rebel-builders] Covering Flapperons
->
->
-> Thanks Mike:
->
-> I have a fairly large iron that I used for covering my my 45% RC aircraft.
-> It is
-> a bit bigger than the standard RC hobby irons. It will go to 400 degrees.
->
-> What do you use?
->
-> On 10/16/2006 8:21 AM, michael.jones@snclavalin.com wrote to rebel-
-> builders:
->
-> -> the poly fiber manual has all steps details and does not cost to much
-> ->
-> -> thats what i am using for a reference, have you got an iron, what is it
-> ->
-> -> mike#007
-> ->
-> -> -----Original Message-----
-> -> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
-> -> pequeajim@dcsol.com
-> -> Sent: Monday, October 16, 2006 12:12 PM
-> -> To: rebel-builders@dcsol.com
-> -> Subject: [rebel-builders] Covering Flapperons
-> ->
-> ->
-> -> I did a search for some feedback on covering the Rebel flapperons and
-> -> happily
-> -> found some references to a step or two that is not detailed in the
murphy
->
-> -> instructions. My question is that, although quite proficient at covering
-> -> large
-> -> model wings, some of the terms relating to the full scale covering are
-> new
-> -> to
-> -> me.
-> ->
-> -> Has anyone on here detailed step by step the covering process? I'm
not
-> -> worried about getting it done, just about forgetting something that I
-> should
-> ->
-> -> have done that was not explained in the build manual.
-> ->
-> ->
-> ->
-> -> -----------------------------------------------------------------
-> -> List archives located at: https://www.dcsol.com/login
-> -> username "rebel" password "builder"
-> -> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> -> List administrator: mike.davis@dcsol.com
-> -> -----------------------------------------------------------------
-> ->
-> ->
-> ->
->
->
->
->
->
-> -----------------------------------------------------------------
-> List archives located at: https://www.dcsol.com/login
-> username "rebel" password "builder"
-> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> List administrator: mike.davis@dcsol.com
-> -----------------------------------------------------------------
->
->
->





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

pequeajim

[rebel-builders] Covering Flapperons

Post by pequeajim » Sun Feb 19, 2012 11:16 am

Thanks Ken:

I just ordered the 3" tape from them, their book and DVD.

I've covered a LOT of RC aircraft, so I think after watching the DVD, I should
have the hang of it.

On 10/17/2006 4:11 AM, klehman@albedo.net wrote to rebel-builders:

-> Yes you will want that Polyfiber covering manual if using polyfiber
-> products.
->
-> I used 3 quarts of silver and 4 quarts of the pink polybrush so a gallon
-> of each is probably the cheapest way to buy chemicals. The small can of
-> glue ( a pint I think) was way more than I needed.
->
-> You may want to purchase the necessary tapes as for me it was very time
-> consuming trying to get the 3" wide tape down smooth on the trailing
-> edge. MAM said to cut that from excess covering material but mine had
-> folds and creases in it that did not want to lay down flat. And the edge
-> of my homemade tape is a bit ragged.
->
-> An old clothes iron worked fine for me as well once calibrated with
-> their thermometer as per the polyfiber manual. And don't forget a few
-> vent washers or seaplane vents.
->
-> For anyone attending Oshkosh or Sun'n Fun, it is worth attending the
-> polyfiber covering workshop for a couple of hours of hands on experience
-> and to get the idea of how the process works. Nothing difficult about it
-> once you see it.
->
-> Ken
->
-> Drew Dalgleish wrote:
->
-> >At 08:11 AM 10/16/2006 -0800, you wrote:
-> >
-> >
-> >>I did a search for some feedback on covering the Rebel flapperons and
-> >>
-> >>
-> >happily
-> >
-> >
-> >>found some references to a step or two that is not detailed in the
murphy
-> >>instructions. My question is that, although quite proficient at covering
-> >>
-> >>
-> >large
-> >
-> >
-> >>model wings, some of the terms relating to the full scale covering are
new
-> >>
-> >>
-> >to
-> >
-> >
-> >>me.
-> >>
-> >>Has anyone on here detailed step by step the covering process? I'm
not
-> >>worried about getting it done, just about forgetting something that I
should
-> >>have done that was not explained in the build manual.
-> >>
-> >>
-> >
-> >Fabric covering is easy. Just pick the system you want to use and follow
-> >the manufacturers instructions.
-> >Drew
-> >
-> >
->
->
->





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Jones, Michael

[rebel-builders] Covering Flapperons

Post by Jones, Michael » Sun Feb 19, 2012 11:16 am

thanks jim

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
pequeajim@dcsol.com
Sent: Tuesday, October 17, 2006 1:24 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Covering Flapperons


Mine does not have an autoshutoff, but it does go to 350 degrees. I bought
it from hHorizon Hobbies about 6-7 years ago. It was called a Hanger 9
Giant
Scale iron and I don't believe they still make it, but you can check.

Here is the smaller Hanger 9 Iron

http://www.horizonhobby.com/Products/De ... dID=HAN135

Here's some from Hobby Lobby

http://www.hobby-lobby.com/heatgun.htm

And from Tower Hobbies

http://www2.towerhobbies.com/cgi-bin/wt ... XB361&P=ML

I looked around for you and could not find the larger ones. I will try
tonight
and send you a link if I find it.

Jim!


On 10/16/2006 8:58 AM, michael.jones@snclavalin.com wrote to rebel-
builders:

-> cant find iron that has no autoshut off and goes to 350, what is make of
-> yours
->
-> -----Original Message-----
-> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
-> pequeajim@dcsol.com
-> Sent: Monday, October 16, 2006 12:53 PM
-> To: rebel-builders@dcsol.com
-> Subject: RE: [rebel-builders] Covering Flapperons
->
->
-> Thanks Mike:
->
-> I have a fairly large iron that I used for covering my my 45% RC
aircraft.
-> It is
-> a bit bigger than the standard RC hobby irons. It will go to 400
degrees.
->
-> What do you use?
->
-> On 10/16/2006 8:21 AM, michael.jones@snclavalin.com wrote to rebel-
-> builders:
->
-> -> the poly fiber manual has all steps details and does not cost to much
-> ->
-> -> thats what i am using for a reference, have you got an iron, what is
it
-> ->
-> -> mike#007
-> ->
-> -> -----Original Message-----
-> -> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
-> -> pequeajim@dcsol.com
-> -> Sent: Monday, October 16, 2006 12:12 PM
-> -> To: rebel-builders@dcsol.com
-> -> Subject: [rebel-builders] Covering Flapperons
-> ->
-> ->
-> -> I did a search for some feedback on covering the Rebel flapperons and
-> -> happily
-> -> found some references to a step or two that is not detailed in the
murphy
->
-> -> instructions. My question is that, although quite proficient at
covering
-> -> large
-> -> model wings, some of the terms relating to the full scale covering are
-> new
-> -> to
-> -> me.
-> ->
-> -> Has anyone on here detailed step by step the covering process? I'm
not
-> -> worried about getting it done, just about forgetting something that I
-> should
-> ->
-> -> have done that was not explained in the build manual.
-> ->
-> ->
-> ->
-> -> -----------------------------------------------------------------
-> -> List archives located at: https://www.dcsol.com/login
-> -> username "rebel" password "builder"
-> -> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> -> List administrator: mike.davis@dcsol.com
-> -> -----------------------------------------------------------------
-> ->
-> ->
-> ->
->
->
->
->
->
-> -----------------------------------------------------------------
-> List archives located at: https://www.dcsol.com/login
-> username "rebel" password "builder"
-> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> List administrator: mike.davis@dcsol.com
-> -----------------------------------------------------------------
->
->
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

tlmcclary@juno.com

[rebel-builders] Covering Flapperons

Post by tlmcclary@juno.com » Sun Feb 19, 2012 11:16 am

Try www.poly-fiber.com and then click misc. covering supplies. They
list a fabric iron and a hobby iron.

These people, Jim and Dondie (? spelling), teach fabric at Oshkosh and
Sun-N-Fun. Good people and if you have a problem, call their business
and they will have the answer.

Terry
R666

-- pequeajim@dcsol.com wrote:
Mine does not have an autoshutoff, but it does go to 350 degrees. I
bought
it from hHorizon Hobbies about 6-7 years ago. It was called a Hanger
9 Giant
Scale iron and I don't believe they still make it, but you can check.

Here is the smaller Hanger 9 Iron

http://www.horizonhobby.com/Products/De ... dID=HAN135

Here's some from Hobby Lobby

http://www.hobby-lobby.com/heatgun.htm

And from Tower Hobbies

http://www2.towerhobbies.com/cgi-bin/wt ... XB361&P=ML

I looked around for you and could not find the larger ones. I will
try tonight
and send you a link if I find it.

Jim!


On 10/16/2006 8:58 AM, michael.jones@snclavalin.com wrote to rebel-
builders:

-> cant find iron that has no autoshut off and goes to 350, what is
make of
-> yours
->
-> -----Original Message-----
-> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
-> pequeajim@dcsol.com
-> Sent: Monday, October 16, 2006 12:53 PM
-> To: rebel-builders@dcsol.com
-> Subject: RE: [rebel-builders] Covering Flapperons
->
->
-> Thanks Mike:
->
-> I have a fairly large iron that I used for covering my my 45% RC
aircraft.
-> It is
-> a bit bigger than the standard RC hobby irons. It will go to 400
degrees.
->
-> What do you use?
->
-> On 10/16/2006 8:21 AM, michael.jones@snclavalin.com wrote to rebel-
-> builders:
->
-> -> the poly fiber manual has all steps details and does not cost to
much
-> ->
-> -> thats what i am using for a reference, have you got an iron,
what is it
-> ->
-> -> mike#007
-> ->
-> -> -----Original Message-----
-> -> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On
Behalf Of
-> -> pequeajim@dcsol.com
-> -> Sent: Monday, October 16, 2006 12:12 PM
-> -> To: rebel-builders@dcsol.com
-> -> Subject: [rebel-builders] Covering Flapperons
-> ->
-> ->
-> -> I did a search for some feedback on covering the Rebel
flapperons and
-> -> happily
-> -> found some references to a step or two that is not detailed in
the
murphy
->
-> -> instructions. My question is that, although quite proficient at
covering
-> -> large
-> -> model wings, some of the terms relating to the full scale
covering are
-> new
-> -> to
-> -> me.
-> ->
-> -> Has anyone on here detailed step by step the covering process?
I'm
not
-> -> worried about getting it done, just about forgetting something
that I
-> should
-> ->
-> -> have done that was not explained in the build manual.
-> ->
-> ->
-> ->
-> -> -----------------------------------------------------------------
-> -> List archives located at: https://www.dcsol.com/login
-> -> username "rebel" password "builder"
-> -> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> -> List administrator: mike.davis@dcsol.com
-> -> -----------------------------------------------------------------
-> ->
-> ->
-> ->
->
->
->
->
->
-> -----------------------------------------------------------------
-> List archives located at: https://www.dcsol.com/login
-> username "rebel" password "builder"
-> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> List administrator: mike.davis@dcsol.com
-> -----------------------------------------------------------------
->
->
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Jones, Michael

[rebel-builders] Covering Flapperons

Post by Jones, Michael » Sun Feb 19, 2012 11:16 am

good idea terry, did not even think to see if poly-fiber has an iron, will
order theirs tonight and get this stupid project done finally

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
tlmcclary@juno.com
Sent: Tuesday, October 17, 2006 3:09 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Covering Flapperons


Try www.poly-fiber.com and then click misc. covering supplies. They
list a fabric iron and a hobby iron.

These people, Jim and Dondie (? spelling), teach fabric at Oshkosh and
Sun-N-Fun. Good people and if you have a problem, call their business
and they will have the answer.

Terry
R666

-- pequeajim@dcsol.com wrote:
Mine does not have an autoshutoff, but it does go to 350 degrees. I
bought
it from hHorizon Hobbies about 6-7 years ago. It was called a Hanger
9 Giant
Scale iron and I don't believe they still make it, but you can check.

Here is the smaller Hanger 9 Iron

http://www.horizonhobby.com/Products/De ... dID=HAN135

Here's some from Hobby Lobby

http://www.hobby-lobby.com/heatgun.htm

And from Tower Hobbies

http://www2.towerhobbies.com/cgi-bin/wt ... XB361&P=ML

I looked around for you and could not find the larger ones. I will
try tonight
and send you a link if I find it.

Jim!


On 10/16/2006 8:58 AM, michael.jones@snclavalin.com wrote to rebel-
builders:

-> cant find iron that has no autoshut off and goes to 350, what is
make of
-> yours
->
-> -----Original Message-----
-> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
-> pequeajim@dcsol.com
-> Sent: Monday, October 16, 2006 12:53 PM
-> To: rebel-builders@dcsol.com
-> Subject: RE: [rebel-builders] Covering Flapperons
->
->
-> Thanks Mike:
->
-> I have a fairly large iron that I used for covering my my 45% RC
aircraft.
-> It is
-> a bit bigger than the standard RC hobby irons. It will go to 400
degrees.
->
-> What do you use?
->
-> On 10/16/2006 8:21 AM, michael.jones@snclavalin.com wrote to rebel-
-> builders:
->
-> -> the poly fiber manual has all steps details and does not cost to
much
-> ->
-> -> thats what i am using for a reference, have you got an iron,
what is it
-> ->
-> -> mike#007
-> ->
-> -> -----Original Message-----
-> -> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On
Behalf Of
-> -> pequeajim@dcsol.com
-> -> Sent: Monday, October 16, 2006 12:12 PM
-> -> To: rebel-builders@dcsol.com
-> -> Subject: [rebel-builders] Covering Flapperons
-> ->
-> ->
-> -> I did a search for some feedback on covering the Rebel
flapperons and
-> -> happily
-> -> found some references to a step or two that is not detailed in
the
murphy
->
-> -> instructions. My question is that, although quite proficient at
covering
-> -> large
-> -> model wings, some of the terms relating to the full scale
covering are
-> new
-> -> to
-> -> me.
-> ->
-> -> Has anyone on here detailed step by step the covering process?
I'm
not
-> -> worried about getting it done, just about forgetting something
that I
-> should
-> ->
-> -> have done that was not explained in the build manual.
-> ->
-> ->
-> ->
-> -> -----------------------------------------------------------------
-> -> List archives located at: https://www.dcsol.com/login
-> -> username "rebel" password "builder"
-> -> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> -> List administrator: mike.davis@dcsol.com
-> -> -----------------------------------------------------------------
-> ->
-> ->
-> ->
->
->
->
->
->
-> -----------------------------------------------------------------
-> List archives located at: https://www.dcsol.com/login
-> username "rebel" password "builder"
-> Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> List administrator: mike.davis@dcsol.com
-> -----------------------------------------------------------------
->
->
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------








-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea

[rebel-builders] Covering flapperons

Post by Wayne G. O'Shea » Sun Feb 19, 2012 11:16 am

Rivets....leave the stitching for your classic J3!

----- Original Message -----
From: <pequeajim@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, October 18, 2006 10:32 PM
Subject: [rebel-builders] Covering flapperons

I just watched the Poly Fiber video, very informative. I do want to ask
you
all. Did you stitch the ribs, or rivet them?



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

pequeajim

[rebel-builders] Covering flapperons

Post by pequeajim » Sun Feb 19, 2012 11:16 am

Are there specific fabric rivets, or did you use plastic washers?

On 10/18/2006 6:36 PM, oifa@irishfield.on.ca wrote to rebel-builders:

-> Rivets....leave the stitching for your classic J3!
->
-> ----- Original Message -----
-> From: <pequeajim@dcsol.com>
-> To: <rebel-builders@dcsol.com>
-> Sent: Wednesday, October 18, 2006 10:32 PM
-> Subject: [rebel-builders] Covering flapperons
->
->
-> >I just watched the Poly Fiber video, very informative. I do want to ask
-> >you
-> > all. Did you stitch the ribs, or rivet them?
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://www.dcsol.com/login
-> > username "rebel" password "builder"
-> > Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
-> >
->
->





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea

[rebel-builders] Covering flapperons

Post by Wayne G. O'Shea » Sun Feb 19, 2012 11:16 am

Use the large head fabric rivets that came with the kit! :O) 7402's !

----- Original Message -----
From: <pequeajim@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, October 18, 2006 10:57 PM
Subject: Re: [rebel-builders] Covering flapperons

Are there specific fabric rivets, or did you use plastic washers?

On 10/18/2006 6:36 PM, oifa@irishfield.on.ca wrote to rebel-builders:

-> Rivets....leave the stitching for your classic J3!
->
-> ----- Original Message -----
-> From: <pequeajim@dcsol.com>
-> To: <rebel-builders@dcsol.com>
-> Sent: Wednesday, October 18, 2006 10:32 PM
-> Subject: [rebel-builders] Covering flapperons
->
->
-> >I just watched the Poly Fiber video, very informative. I do want to
ask
-> >you
-> > all. Did you stitch the ribs, or rivet them?
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://www.dcsol.com/login
-> > username "rebel" password "builder"
-> > Unsubscribe: rebel-builders-unsubscribe@dcsol.com
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
-> >
->
->





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Locked