strut block bolts

[Ron Shannon]

If the manual is read literally, it looks like there are supposed to be
a total of five (5) bolts through each strut block, and pictures I have
seen show five. (See http://n254mr.com/gallery2/v/Rebels/Misc/) However,
five looks like a lot, leaving quite a bit of the block (and strut)
drilled out.

At Oshkosh I saw Steve Whitenecht had four (4) bolts in each strut
block, which certainly looked quite adequate, at least through this
non-engineer's eyes. Steve (who was really helpful giving me a tour of
his very nice work -- thanks Steve) said he had used four because that's
all MAM had delivered with his kit.

So, which should it be, 4 or 5? Has anybody else used 4?

Ron
254R
http://n254mr.com



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------