Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

air filters

Converted from Wildcat! database. (read only)
Locked
Jones, Michael

air filters

Post by Jones, Michael » Sun Feb 19, 2012 11:00 am

hi all

does no body know a k & n part number to replace the reel stock foam filter
??

mike#007




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Ralph Baker

air filters

Post by Ralph Baker » Sun Feb 19, 2012 11:00 am

I do indeed have a K&N on our Elite. It is mounted in a Van's O-360 air intake box. It was used because I have had good experience with K&N's on motorcycles and trucks. As a big plus, the Van's airbox filters all the air including carb heat air. The filter is a large round unit and should offer much less restriction than stock.

Now the bad news. The Van's airbox will require a "bump" on the left side of the speed cowl for clearance as well as some creativity to mate it to the square MAM air intake area. Our solution will be to graft a Van's air intake onto the bottom of the speed cowl for clearance. It will add a larger and better shaped hot air exit as well. Probably will add at least 50 knots of airspeed in addition to the extra build hours.
Ralph Baker



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Steve Halvorsen

Air Filters

Post by Steve Halvorsen » Sun Feb 19, 2012 4:37 pm

Can anyone advise me on what they are using for an air filter on a Moose with the M-14P engine?? ?
Have MAM's cowl.

Have to install one on and and need some help.

Thanks

Steve H
Moose 213



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Locked