Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] Rebel - wing strut fairings

Converted from Wildcat! database. (read only)
Locked
Wayne G. O'Shea

[rebel-builders] Rebel - wing strut fairings

Post by Wayne G. O'Shea » Sun Feb 19, 2012 10:44 am

Yep....I noticed that tonight as well Bob. Like old clothes if you keep them
around long enough they will come back into style! I still prefer the looks
of the alum wraps and not sure why you have problems with yours Bob... but
mine and Howard's still look as new after 10 + years.

If someone wants to buy a set......or two...or three of these fiberglass
ones...make me an offer !! Heck I even have at least one set that is already
fitted and ready to install! ;O)

I also have acquired one of the double bulb leading edge landing light kits
if anyone is interested in that.

Wayne

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, May 04, 2006 9:47 PM
Subject: [rebel-builders] Rebel - wing strut fairings

Hi All !!

Mike Basic just told me about a new addition to the Murphy
Accessories section on the Murphy web site .....

The old, original fiberglass strut fairings are now available
again !! These things are GREAT !!! They make a nice, aerodynamic
fillet to the wing & fuselage, and are very sturdy !!!

They do need trimming, to remove the lip around the bases,
and maybe a bit of silicone to give a tight seal, but they will
definitely work better & last longer than the simple aluminum
wraps we have been using (and replacing often !). They bolt on,
and are easy to remove - or slide down for inspection.

They are only $258.75 Canadian / $225 USD for a set of 4.
Beats trying to make your own ! :-)

.....bobp



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Bob Patterson

[rebel-builders] Rebel - wing strut fairings

Post by Bob Patterson » Sun Feb 19, 2012 10:44 am

Hi Wayne !

Maybe yours were thicker or narrower than mine ... My inboard
strut fairings get beaten to death by the propwash - they crack at the
trailing edge, around the fasteners ! Have replaced them at least twice.

Hmmmmmmmm .... fiberglass fairings, fitted & ready to install ...
hmmmmmm.... time for an offline talk ! ;-)

......bobp

-------------------------------orig.-------------------------
On Friday 05 May 2006 01:56 am, Wayne G. O'Shea wrote:
Yep....I noticed that tonight as well Bob. Like old clothes if you keep
them around long enough they will come back into style! I still prefer the
looks of the alum wraps and not sure why you have problems with yours
Bob... but mine and Howard's still look as new after 10 + years.

If someone wants to buy a set......or two...or three of these fiberglass
ones...make me an offer !! Heck I even have at least one set that is
already fitted and ready to install! ;O)

I also have acquired one of the double bulb leading edge landing light kits
if anyone is interested in that.

Wayne

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, May 04, 2006 9:47 PM
Subject: [rebel-builders] Rebel - wing strut fairings
Hi All !!

Mike Basic just told me about a new addition to the Murphy
Accessories section on the Murphy web site .....

The old, original fiberglass strut fairings are now available
again !! These things are GREAT !!! They make a nice, aerodynamic
fillet to the wing & fuselage, and are very sturdy !!!

They do need trimming, to remove the lip around the bases,
and maybe a bit of silicone to give a tight seal, but they will
definitely work better & last longer than the simple aluminum
wraps we have been using (and replacing often !). They bolt on,
and are easy to remove - or slide down for inspection.

They are only $258.75 Canadian / $225 USD for a set of 4.
Beats trying to make your own ! :-)

.....bobp

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Drew Dalgleish

[rebel-builders] Rebel - wing strut fairings

Post by Drew Dalgleish » Sun Feb 19, 2012 10:44 am

At 01:47 AM 5/5/2006 +0000, you wrote:
Hi All !!

Mike Basic just told me about a new addition to the Murphy
Accessories section on the Murphy web site .....

The old, original fiberglass strut fairings are now available
again !! These things are GREAT !!! They make a nice, aerodynamic
fillet to the wing & fuselage, and are very sturdy !!!

They do need trimming, to remove the lip around the bases,
and maybe a bit of silicone to give a tight seal, but they will
definitely work better & last longer than the simple aluminum
wraps we have been using (and replacing often !). They bolt on,
and are easy to remove - or slide down for inspection.

They are only $258.75 Canadian / $225 USD for a set of 4.
Beats trying to make your own ! :-)

.....bobp
Well I hope they're better quality than the ones that came with my kit. I'm
a cheap scottsman that saves and uses everything but those fairings went
out with the trash long ago.




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Alan Hepburn

[rebel-builders] Rebel - wing strut fairings

Post by Alan Hepburn » Sun Feb 19, 2012 10:44 am

Guys:

The Elite instruction basically tell you to wrap a bit of aluminum round
the strut, and leave the rest to my imagination. Here's what I came up
with:

1) make a channel section out of 0.020 material which fits under the nut
end of all 8 strut attach bolts. It is kind of like a U in cross
section, with the legs of the U bent outwards to form flanges about 5/8"
above the surface of the strut. It runs along the length of the strut,
and is long enough to cover all 8 bolts. On the outward bent flanges,
mount 4 Tinnerman clip nuts (#6).

2) wrap a piece of aliminum around the strut and this channel. This
aluminum is held together at the trailing edge by 5 #6 SS bolts and
nuts. At the outboard ends, these fairings are trimmed to fit the
fueslage or wing. At the inboard ends, they extend 3/4" beyond the
fairing.

3) attach a piece of 032 material to the part of the fairing that rubs
against the heads of the strut bolts (to take any wear)

4) make up small tapered fairings from fiberglass to cover the gap on
the nut side of the strut attach bolts to bridge the gap between the
aluminum fairing and the strut. Secure these to the aluminum fairing
with rivets, and to the strut with a single #6 shett metal screw. The
gap on the head side of the bolts is only about 3/16", and does not
require bridging.

The result is neat and very secure.

Al






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Ken

[rebel-builders] Rebel - wing strut fairings

Post by Ken » Sun Feb 19, 2012 10:44 am

Drew Dalgleish wrote:
At 01:47 AM 5/5/2006 +0000, you wrote:

Hi All !!

Mike Basic just told me about a new addition to the Murphy
Accessories section on the Murphy web site .....

The old, original fiberglass strut fairings are now available
again !! These things are GREAT !!! They make a nice, aerodynamic
fillet to the wing & fuselage, and are very sturdy !!!

They do need trimming, to remove the lip around the bases,
and maybe a bit of silicone to give a tight seal, but they will
definitely work better & last longer than the simple aluminum
wraps we have been using (and replacing often !). They bolt on,
and are easy to remove - or slide down for inspection.

They are only $258.75 Canadian / $225 USD for a set of 4.
Beats trying to make your own ! :-)

.....bobp

Well I hope they're better quality than the ones that came with my kit. I'm
a cheap scottsman that saves and uses everything but those fairings went
out with the trash long ago.

Yup the ones that I got back in 1992 weren't worth much. Lots of
filling, sanding, patching cracks, and fitting to get them half way
useable! And then the pinholes that appeared when painting... I can see
why they dropped them in favour of metal ones back then.
Ken







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Vickie

[rebel-builders] Rebel - wing strut fairings

Post by Vickie » Sun Feb 19, 2012 10:47 am

Wayne

I'm finishing up a Rebel and would be interested in a set of the strut
fairings.

Hank Balch
307R
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, May 04, 2006 9:56 PM
Subject: Re: [rebel-builders] Rebel - wing strut fairings

Yep....I noticed that tonight as well Bob. Like old clothes if you keep
them
around long enough they will come back into style! I still prefer the
looks
of the alum wraps and not sure why you have problems with yours Bob... but
mine and Howard's still look as new after 10 + years.

If someone wants to buy a set......or two...or three of these fiberglass
ones...make me an offer !! Heck I even have at least one set that is
already
fitted and ready to install! ;O)

I also have acquired one of the double bulb leading edge landing light
kits
if anyone is interested in that.

Wayne

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, May 04, 2006 9:47 PM
Subject: [rebel-builders] Rebel - wing strut fairings

Hi All !!

Mike Basic just told me about a new addition to the Murphy
Accessories section on the Murphy web site .....

The old, original fiberglass strut fairings are now available
again !! These things are GREAT !!! They make a nice, aerodynamic
fillet to the wing & fuselage, and are very sturdy !!!

They do need trimming, to remove the lip around the bases,
and maybe a bit of silicone to give a tight seal, but they will
definitely work better & last longer than the simple aluminum
wraps we have been using (and replacing often !). They bolt on,
and are easy to remove - or slide down for inspection.

They are only $258.75 Canadian / $225 USD for a set of 4.
Beats trying to make your own ! :-)

.....bobp



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea

[rebel-builders] Rebel - wing strut fairings

Post by Wayne G. O'Shea » Sun Feb 19, 2012 10:47 am

Hank, Bob Patterson just left with the fitted set. (GREAT see'in you again
Bob!). I just shipped out the second set to Jeffery Steenson this morning
and that leaves one set from when MAM's glass work wasn't the greatest. I am
waiting for a gentleman to tell me if he wants that set and if not you are
next in line.

The landing light mounting kit is also already gone.... to PA !

Cheers,
Wayne

----- Original Message -----
From: "Vickie" <cwfarm@mindspring.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, May 08, 2006 7:52 PM
Subject: Re: [rebel-builders] Rebel - wing strut fairings

Wayne

I'm finishing up a Rebel and would be interested in a set of the strut
fairings.

Hank Balch
307R
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, May 04, 2006 9:56 PM
Subject: Re: [rebel-builders] Rebel - wing strut fairings

Yep....I noticed that tonight as well Bob. Like old clothes if you keep
them
around long enough they will come back into style! I still prefer the
looks
of the alum wraps and not sure why you have problems with yours Bob...
but
mine and Howard's still look as new after 10 + years.

If someone wants to buy a set......or two...or three of these fiberglass
ones...make me an offer !! Heck I even have at least one set that is
already
fitted and ready to install! ;O)

I also have acquired one of the double bulb leading edge landing light
kits
if anyone is interested in that.

Wayne

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, May 04, 2006 9:47 PM
Subject: [rebel-builders] Rebel - wing strut fairings

Hi All !!

Mike Basic just told me about a new addition to the Murphy
Accessories section on the Murphy web site .....

The old, original fiberglass strut fairings are now available
again !! These things are GREAT !!! They make a nice, aerodynamic
fillet to the wing & fuselage, and are very sturdy !!!

They do need trimming, to remove the lip around the bases,
and maybe a bit of silicone to give a tight seal, but they will
definitely work better & last longer than the simple aluminum
wraps we have been using (and replacing often !). They bolt on,
and are easy to remove - or slide down for inspection.

They are only $258.75 Canadian / $225 USD for a set of 4.
Beats trying to make your own ! :-)

.....bobp



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hank & Vickie Balch

[rebel-builders] Rebel - wing strut fairings

Post by Hank & Vickie Balch » Sun Feb 19, 2012 10:47 am

Wayne

Thanks for the quick response. Just keep me in mind.

Hank
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, May 08, 2006 8:25 PM
Subject: Re: [rebel-builders] Rebel - wing strut fairings

Hank, Bob Patterson just left with the fitted set. (GREAT see'in you again
Bob!). I just shipped out the second set to Jeffery Steenson this morning
and that leaves one set from when MAM's glass work wasn't the greatest. I
am
waiting for a gentleman to tell me if he wants that set and if not you are
next in line.

The landing light mounting kit is also already gone.... to PA !

Cheers,
Wayne

----- Original Message -----
From: "Vickie" <cwfarm@mindspring.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, May 08, 2006 7:52 PM
Subject: Re: [rebel-builders] Rebel - wing strut fairings

Wayne

I'm finishing up a Rebel and would be interested in a set of the strut
fairings.

Hank Balch
307R
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, May 04, 2006 9:56 PM
Subject: Re: [rebel-builders] Rebel - wing strut fairings

Yep....I noticed that tonight as well Bob. Like old clothes if you
keep
them
around long enough they will come back into style! I still prefer the
looks
of the alum wraps and not sure why you have problems with yours Bob...
but
mine and Howard's still look as new after 10 + years.

If someone wants to buy a set......or two...or three of these
fiberglass
ones...make me an offer !! Heck I even have at least one set that is
already
fitted and ready to install! ;O)

I also have acquired one of the double bulb leading edge landing light
kits
if anyone is interested in that.

Wayne

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, May 04, 2006 9:47 PM
Subject: [rebel-builders] Rebel - wing strut fairings





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea

[rebel-builders] Rebel - wing strut fairings

Post by Wayne G. O'Shea » Sun Feb 19, 2012 10:47 am

Sorry Hank and anyone else wanting.....All three sets of fairings and the
landing light mount are SOLD.

Thanks,
Wayne

----- Original Message -----
From: "Hank & Vickie Balch" <cwfarm@mindspring.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, May 08, 2006 8:17 PM
Subject: Re: [rebel-builders] Rebel - wing strut fairings

Wayne

Thanks for the quick response. Just keep me in mind.

Hank
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, May 08, 2006 8:25 PM
Subject: Re: [rebel-builders] Rebel - wing strut fairings

Hank, Bob Patterson just left with the fitted set. (GREAT see'in you
again
Bob!). I just shipped out the second set to Jeffery Steenson this
morning
and that leaves one set from when MAM's glass work wasn't the greatest.
I
am
waiting for a gentleman to tell me if he wants that set and if not you
are
next in line.

The landing light mounting kit is also already gone.... to PA !

Cheers,
Wayne

----- Original Message -----
From: "Vickie" <cwfarm@mindspring.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, May 08, 2006 7:52 PM
Subject: Re: [rebel-builders] Rebel - wing strut fairings

Wayne

I'm finishing up a Rebel and would be interested in a set of the strut
fairings.

Hank Balch
307R
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, May 04, 2006 9:56 PM
Subject: Re: [rebel-builders] Rebel - wing strut fairings

keep
them
the
looks
Bob...
but
fiberglass
already
light
kits
aerodynamic


-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Dale Kilbey

[rebel-builders] Rebel - wing strut fairings

Post by Dale Kilbey » Sun Feb 19, 2012 10:47 am

Hank
I have a set of the original fibreglass fairings that came with the kit if
you are interested.
Dale




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Dale Fultz

[rebel-builders] Rebel - wing strut fairings

Post by Dale Fultz » Sun Feb 19, 2012 10:47 am

----- Original Message -----
From: "Dale Kilbey" <dale.kilbey@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, May 10, 2006 10:29 AM
Subject: Re: [rebel-builders] Rebel - wing strut fairings

Hank
I have a set of the original fibreglass fairings that came with the kit if
you are interested.
Dale




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hank & Vickie Balch

[rebel-builders] Rebel - wing strut fairings

Post by Hank & Vickie Balch » Sun Feb 19, 2012 10:47 am

Dale

Let's talk. My e-mail is cwfarm@mindspring.com

Hank
----- Original Message -----
From: "Dale Kilbey" <dale.kilbey@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, May 10, 2006 10:29 AM
Subject: Re: [rebel-builders] Rebel - wing strut fairings

Hank
I have a set of the original fibreglass fairings that came with the kit if
you are interested.
Dale




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Locked