[rebel-builders] UHS spinners

[Wayne G. O'Shea]

Don't see why not Drew. 10 " with a deep backing plate fits the Sensenich
but it doesn't quite wrap all the way around. How thick is the Prince Prop??

Wayne

----- Original Message -----
From: "Drew Dalgleish" <drewjan@cabletv.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, March 30, 2006 8:15 PM
Subject: [rebel-builders] UHS spinners

Wayne does UHS make a spinner for a prince prop? If so are you still a
dealer for them?
Drew





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Drew Dalgleish]

At 01:00 AM 4/1/2006 -0500, you wrote:

Don't see why not Drew. 10 " with a deep backing plate fits the Sensenich
but it doesn't quite wrap all the way around. How thick is the Prince Prop??

Wayne

I think it's about the same thickness as a wood prop.
Drew





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

Well the 10" wraps 3.5" around the prop if you order the Extra Deep (XD).
The 12 inch wraps 3.25 but is more of a rounded nose spinner..compared to
the usual pointy spinner and I won't sell the 14" unless someone really
wants one bad.

If you want one send my an email directly.

Cheers,
Wayne

----- Original Message -----
From: "Drew Dalgleish" <drewjan@cabletv.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, April 01, 2006 4:03 PM
Subject: Re: [rebel-builders] UHS spinners

At 01:00 AM 4/1/2006 -0500, you wrote:

Don't see why not Drew. 10 " with a deep backing plate fits the Sensenich
but it doesn't quite wrap all the way around. How thick is the Prince

Prop??

Wayne

I think it's about the same thickness as a wood prop.
Drew





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Drew Dalgleish]

At 04:11 PM 4/1/2006 -0500, you wrote:

Well the 10" wraps 3.5" around the prop if you order the Extra Deep (XD).
The 12 inch wraps 3.25 but is more of a rounded nose spinner..compared to
the usual pointy spinner and I won't sell the 14" unless someone really
wants one bad.

If you want one send my an email directly.

Cheers,
Wayne

OK thanks Wayne I haven't ordered a prop yet but just wanted to know what
my options are when I do.
Drew





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------