Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

Rebel - Elevator rigging

Converted from Wildcat! database. (read only)
Locked
Wayne G. O'Shea

Rebel - Elevator rigging

Post by Wayne G. O'Shea » Sat Feb 18, 2012 2:37 pm

Del.....look where you've been once in a while!!! Easy to look back at the
elevator spade. LOL

Wayne

----- Original Message -----
From: "Schmucker, Del" <del.schmucker@kpdsb.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 04, 2006 5:09 PM
Subject: RE: Rebel Rudder pedals:

On floats I don't know whether there is any additional up elevator if
there is I don't notice it on ski's in the winter. Realize that 10
degrees on the elevator is not very much stick movement.

Thank you,

Del Schmucker
Information Systems Manager
Keewatin-Patricia District School Board
807-223-1254
807-221-8769 Cell
807-223-4703 Fax
del.schmucker@kpdsb.on.ca
www.kpdsb.on.ca

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Alvin and Glenys Adams
Sent: Wednesday, January 04, 2006 2:55 PM
To: rebel
Subject: Rebel Rudder pedals:

read you postings with great interest as i am about to install nico
press on my elevator cables.I assumed i would rig cables to have stick
in comfortable position with elevator level with stabilizer.This was the
case with my PA-11.Al says he flies level flight on floats with 10
degree up elevator.Why would a aircraft be designed like this.Hope mine
will not be like this.Seams sort of inefficient.Should i set up for
comfortable stick at o degrees or 10 degree up.


Alvin Rebel 776.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Schmucker, Del

Rebel - Elevator rigging

Post by Schmucker, Del » Sat Feb 18, 2012 2:37 pm

I guess I'll have to do that and respond accordingly.


Thank you,

Del Schmucker
Information Systems Manager
Keewatin-Patricia District School Board
807-223-1254
807-221-8769 Cell
807-223-4703 Fax
del.schmucker@kpdsb.on.ca
www.kpdsb.on.ca


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, January 04, 2006 4:09 PM
To: rebel-builders@dcsol.com
Subject: Re:Rebel - Elevator rigging

Del.....look where you've been once in a while!!! Easy to look back at
the
elevator spade. LOL

Wayne
read you postings with great interest as i am about to install nico
press on my elevator cables.I assumed i would rig cables to have stick
in comfortable position with elevator level with stabilizer.This was
the
case with my PA-11.Al says he flies level flight on floats with 10
degree up elevator.Why would a aircraft be designed like this.Hope
mine
will not be like this.Seams sort of inefficient.Should i set up for
comfortable stick at o degrees or 10 degree up.


Alvin Rebel 776.



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Wayne G. O'Shea

Rebel - Elevator rigging

Post by Wayne G. O'Shea » Sat Feb 18, 2012 2:37 pm

Just messin with ya! You need to get down to Temagami this summer to join
the gang fishing!

----- Original Message -----
From: "Schmucker, Del" <del.schmucker@kpdsb.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 04, 2006 5:20 PM
Subject: RE: Rebel - Elevator rigging

I guess I'll have to do that and respond accordingly.


Thank you,

Del Schmucker
Information Systems Manager
Keewatin-Patricia District School Board
807-223-1254
807-221-8769 Cell
807-223-4703 Fax
del.schmucker@kpdsb.on.ca
www.kpdsb.on.ca


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, January 04, 2006 4:09 PM
To: rebel-builders@dcsol.com
Subject: Re:Rebel - Elevator rigging

Del.....look where you've been once in a while!!! Easy to look back at
the
elevator spade. LOL

Wayne
read you postings with great interest as i am about to install nico
press on my elevator cables.I assumed i would rig cables to have stick
in comfortable position with elevator level with stabilizer.This was
the
case with my PA-11.Al says he flies level flight on floats with 10
degree up elevator.Why would a aircraft be designed like this.Hope
mine
will not be like this.Seams sort of inefficient.Should i set up for
comfortable stick at o degrees or 10 degree up.


Alvin Rebel 776.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Bruce Georgen

Rebel - Elevator rigging

Post by Bruce Georgen » Sat Feb 18, 2012 2:37 pm

My wheeled Rebel flew with a straight elevator but with floats It flies with up elevator in cruise. The C&G did not change with the float installation so I'm guessing it must be the angle I mounted the floats that makes it fly nose heavy. I think it was 4 or 4-1/2 *, I can't remember, but I know it was 1 or 1-1/2 more than the Manual stated. Robin at MAM suggested increasing it.

Bruce

-----Original Message-----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Sent: Jan 4, 2006 5:20 PM
To: rebel-builders@dcsol.com
Subject: Re: Rebel - Elevator rigging

Just messin with ya! You need to get down to Temagami this summer to join
the gang fishing!

----- Original Message -----
From: "Schmucker, Del" <del.schmucker@kpdsb.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 04, 2006 5:20 PM
Subject: RE: Rebel - Elevator rigging

I guess I'll have to do that and respond accordingly.


Thank you,

Del Schmucker
Information Systems Manager
Keewatin-Patricia District School Board
807-223-1254
807-221-8769 Cell
807-223-4703 Fax
del.schmucker@kpdsb.on.ca
www.kpdsb.on.ca


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, January 04, 2006 4:09 PM
To: rebel-builders@dcsol.com
Subject: Re:Rebel - Elevator rigging

Del.....look where you've been once in a while!!! Easy to look back at
the
elevator spade. LOL

Wayne
read you postings with great interest as i am about to install nico
press on my elevator cables.I assumed i would rig cables to have stick
in comfortable position with elevator level with stabilizer.This was
the
case with my PA-11.Al says he flies level flight on floats with 10
degree up elevator.Why would a aircraft be designed like this.Hope
mine
will not be like this.Seams sort of inefficient.Should i set up for
comfortable stick at o degrees or 10 degree up.


Alvin Rebel 776.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Mike Betti

Rebel - Elevator rigging

Post by Mike Betti » Sat Feb 18, 2012 2:37 pm

With the recent talk of keeping the throws the same on the control column as
on the elevator, I measured the original from MAM on my Elite. Measuring the
radius of each, I got 2" throw at the column and 3" at the elevator horns.
So I'm thinking I will be ok modifying it. Still waiting for word from MAM
on their input.
Mike Betti
----- Original Message -----
From: "Bruce Georgen" <bgeorgen@peoplepc.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 04, 2006 6:29 PM
Subject: Re: Rebel - Elevator rigging

My wheeled Rebel flew with a straight elevator but with floats It flies
with up elevator in cruise. The C&G did not change with the float
installation so I'm guessing it must be the angle I mounted the floats
that makes it fly nose heavy. I think it was 4 or 4-1/2 *, I can't
remember, but I know it was 1 or 1-1/2 more than the Manual stated. Robin
at MAM suggested increasing it.

Bruce

-----Original Message-----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Sent: Jan 4, 2006 5:20 PM
To: rebel-builders@dcsol.com
Subject: Re: Rebel - Elevator rigging

Just messin with ya! You need to get down to Temagami this summer to join
the gang fishing!

----- Original Message -----
From: "Schmucker, Del" <del.schmucker@kpdsb.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, January 04, 2006 5:20 PM
Subject: RE: Rebel - Elevator rigging

I guess I'll have to do that and respond accordingly.


Thank you,

Del Schmucker
Information Systems Manager
Keewatin-Patricia District School Board
807-223-1254
807-221-8769 Cell
807-223-4703 Fax
del.schmucker@kpdsb.on.ca
www.kpdsb.on.ca


-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, January 04, 2006 4:09 PM
To: rebel-builders@dcsol.com
Subject: Re:Rebel - Elevator rigging

Del.....look where you've been once in a while!!! Easy to look back at
the
elevator spade. LOL

Wayne
the mine
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”