Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

Aeronca Leaf Spring (was Composite Tailwheel spring)

Converted from Wildcat! database. (read only)
Locked
Walter Klatt

Aeronca Leaf Spring (was Composite Tailwheel spring)

Post by Walter Klatt » Sat Feb 18, 2012 2:01 pm

I only had 50 hours on wheels before I went to floats and mostly
pavement. But I know 2 other Rebels that used the same tail
spring. One had over 500 hours (Julius) with no problems before
he went to floats. He used to fly it out of Fort Langley which
has a fairly rough grass strip.

Walter
-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
rognal@dcsol.com
Sent: Sunday, October 16, 2005 5:50 PM
To: rebel-builders@dcsol.com
Subject: Aeronca Leaf Spring (was Composite Tailwheel spring)


All,

I was curious about the Aeronca tailwheel leafspring
mentioned by Walter and
wondered how the 7AC & 11AC models compared with the
Rebel in regard to gross
weight (1650#). I Googled these two models and came up
with 1250# and 1350#
respectively.

If these gross weights are correct (or in the
ballpark), does anyone think
this tailspring might be too light for the 1650# Rebel?

Roger Hoffman #687R
Eugene, OR USA!





-------------------------------------------------------
----------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-------------------------------------------------------
----------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea

Aeronca Leaf Spring (was Composite Tailwheel spring)

Post by Wayne G. O'Shea » Sat Feb 18, 2012 2:01 pm

The rebel is lighter on the tail than a Champ or Cub...don't see the spring
being an issue and as matter of fact I think I have one here that I got with
an AULA rebel. Believe they are only 1 1/2" wide (not 1 3/4) so will need
some serious shimming.

----- Original Message -----
From: "Walter Klatt" <Walter.Klatt@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Sunday, October 16, 2005 9:11 PM
Subject: RE: Aeronca Leaf Spring (was Composite Tailwheel spring)

I only had 50 hours on wheels before I went to floats and mostly
pavement. But I know 2 other Rebels that used the same tail
spring. One had over 500 hours (Julius) with no problems before
he went to floats. He used to fly it out of Fort Langley which
has a fairly rough grass strip.

Walter
-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
rognal@dcsol.com
Sent: Sunday, October 16, 2005 5:50 PM
To: rebel-builders@dcsol.com
Subject: Aeronca Leaf Spring (was Composite Tailwheel spring)


All,

I was curious about the Aeronca tailwheel leafspring
mentioned by Walter and
wondered how the 7AC & 11AC models compared with the
Rebel in regard to gross
weight (1650#). I Googled these two models and came up
with 1250# and 1350#
respectively.

If these gross weights are correct (or in the
ballpark), does anyone think
this tailspring might be too light for the 1650# Rebel?

Roger Hoffman #687R
Eugene, OR USA!





-------------------------------------------------------
----------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-------------------------------------------------------
----------




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

rognal

Aeronca Leaf Spring (was Composite Tailwheel spring)

Post by rognal » Sat Feb 18, 2012 2:01 pm

All,

I was curious about the Aeronca tailwheel leafspring mentioned by Walter and
wondered how the 7AC & 11AC models compared with the Rebel in regard to gross
weight (1650#). I Googled these two models and came up with 1250# and 1350#
respectively.

If these gross weights are correct (or in the ballpark), does anyone think
this tailspring might be too light for the 1650# Rebel?

Roger Hoffman #687R
Eugene, OR USA!





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


Locked