Elite doors

[Mike Betti]

Hi all,
Has anyone done anything different with the door/window arrangement on
the Elite? I was thinking on the lines of the way a Super Cub or Husky
do it.
Thanks,
Mike Betti
Elite 771



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Bob Andrews]

Mike,

Plan on making them seaplane doors .... both doors fully windowed and hinged
along the top. The forward bottom corner will be removed from the door to
clear the strut when the door is open. Haven't gotten there yet ... but
that's the plan.

Bob 612e

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Tuesday, May 31, 2005 3:35 PM
To: rebel-builders@dcsol.com
Subject: Elite doors


Hi all,
Has anyone done anything different with the door/window arrangement on
the Elite? I was thinking on the lines of the way a Super Cub or Husky
do it.
Thanks,
Mike Betti
Elite 771



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Mike Betti]

That's what I would like, anybody have any pics of a finished product?
Mike Betti

----- Original Message -----
From: "Bob Andrews" <robert@montanasky.us>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 5:39 PM
Subject: RE: Elite doors

Mike,

Plan on making them seaplane doors .... both doors fully windowed and
hinged
along the top. The forward bottom corner will be removed from the door to
clear the strut when the door is open. Haven't gotten there yet ... but
that's the plan.

Bob 612e

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Tuesday, May 31, 2005 3:35 PM
To: rebel-builders@dcsol.com
Subject: Elite doors


Hi all,
Has anyone done anything different with the door/window arrangement on
the Elite? I was thinking on the lines of the way a Super Cub or Husky
do it.
Thanks,
Mike Betti
Elite 771



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

Look in the Rebel section. Sure there are some pics there of gullwing doors.
My doors swing both ways. Normal front hinged door and up lifting window, or
bolt the two sections together, remove the front hinge pin and they become
gullwings. Guess I might finally get around to using them that way in the
next few weeks if I ever get those floats on!

Wayne

----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 10:19 PM
Subject: Re: Elite doors

That's what I would like, anybody have any pics of a finished product?
Mike Betti

----- Original Message -----
From: "Bob Andrews" <robert@montanasky.us>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 5:39 PM
Subject: RE: Elite doors

Mike,

Plan on making them seaplane doors .... both doors fully windowed and
hinged
along the top. The forward bottom corner will be removed from the door

to

clear the strut when the door is open. Haven't gotten there yet ... but
that's the plan.

Bob 612e

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Tuesday, May 31, 2005 3:35 PM
To: rebel-builders@dcsol.com
Subject: Elite doors


Hi all,
Has anyone done anything different with the door/window arrangement on
the Elite? I was thinking on the lines of the way a Super Cub or Husky
do it.
Thanks,
Mike Betti
Elite 771



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Mike Betti]

I can't find any pics in the arcives. Looks like Mike 007 had some in the
rebel files but they aren't there anymore. Mike do you still have those door
pics.
Thanks,
Mike Betti

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 9:24 PM
Subject: Re: Elite doors

Look in the Rebel section. Sure there are some pics there of gullwing
doors.
My doors swing both ways. Normal front hinged door and up lifting window,
or
bolt the two sections together, remove the front hinge pin and they become
gullwings. Guess I might finally get around to using them that way in the
next few weeks if I ever get those floats on!

Wayne

----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 10:19 PM
Subject: Re: Elite doors

That's what I would like, anybody have any pics of a finished product?
Mike Betti

----- Original Message -----
From: "Bob Andrews" <robert@montanasky.us>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 5:39 PM
Subject: RE: Elite doors

Mike,

Plan on making them seaplane doors .... both doors fully windowed and
hinged
along the top. The forward bottom corner will be removed from the door

to

clear the strut when the door is open. Haven't gotten there yet ...
but
that's the plan.

Bob 612e

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Tuesday, May 31, 2005 3:35 PM
To: rebel-builders@dcsol.com
Subject: Elite doors


Hi all,
Has anyone done anything different with the door/window arrangement on
the Elite? I was thinking on the lines of the way a Super Cub or Husky
do it.
Thanks,
Mike Betti
Elite 771



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jones, Michael]

hi mike

whay are you looking for, gull wing doors ?
i have drawings and all part numbers for ordering
will try to repost the pics and some new asap

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Wednesday, June 01, 2005 8:11 PM
To: rebel-builders@dcsol.com
Subject: Re: Elite doors


I can't find any pics in the arcives. Looks like Mike 007 had some in the
rebel files but they aren't there anymore. Mike do you still have those door

pics.
Thanks,
Mike Betti

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 9:24 PM
Subject: Re: Elite doors

Look in the Rebel section. Sure there are some pics there of gullwing
doors.
My doors swing both ways. Normal front hinged door and up lifting window,
or
bolt the two sections together, remove the front hinge pin and they become
gullwings. Guess I might finally get around to using them that way in the
next few weeks if I ever get those floats on!

Wayne

----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 10:19 PM
Subject: Re: Elite doors

That's what I would like, anybody have any pics of a finished product?
Mike Betti

----- Original Message -----
From: "Bob Andrews" <robert@montanasky.us>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 5:39 PM
Subject: RE: Elite doors

Mike,

Plan on making them seaplane doors .... both doors fully windowed and
hinged
along the top. The forward bottom corner will be removed from the door

to

clear the strut when the door is open. Haven't gotten there yet ...
but
that's the plan.

Bob 612e

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Tuesday, May 31, 2005 3:35 PM
To: rebel-builders@dcsol.com
Subject: Elite doors


Hi all,
Has anyone done anything different with the door/window arrangement on
the Elite? I was thinking on the lines of the way a Super Cub or Husky
do it.
Thanks,
Mike Betti
Elite 771



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Bob Andrews]

Hi Mike,

Look forward to seeing them. To get the door demention changes at the
forward lower corners, I'm temporarily installing one of the wings and wing
strut. One solution to the strut clearance issue is to do what Sam and
Sandy did ... The Archer Elite has gull wing doors, and they hinged the
lower front corner section of the door so that it can clear the wing strut
... and it works well. My plan is to gusset the fuselage opening at that
corner and remove the same area from the door.

Bob 612e

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jones, Michael
Sent: Thursday, June 02, 2005 4:58 AM
To: 'rebel-builders@dcsol.com'
Subject: RE: Elite doors


hi mike

whay are you looking for, gull wing doors ?
i have drawings and all part numbers for ordering
will try to repost the pics and some new asap

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Wednesday, June 01, 2005 8:11 PM
To: rebel-builders@dcsol.com
Subject: Re: Elite doors


I can't find any pics in the arcives. Looks like Mike 007 had some in the
rebel files but they aren't there anymore. Mike do you still have those door

pics.
Thanks,
Mike Betti

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 9:24 PM
Subject: Re: Elite doors

Look in the Rebel section. Sure there are some pics there of gullwing
doors.
My doors swing both ways. Normal front hinged door and up lifting window,
or
bolt the two sections together, remove the front hinge pin and they become
gullwings. Guess I might finally get around to using them that way in the
next few weeks if I ever get those floats on!

Wayne

----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 10:19 PM
Subject: Re: Elite doors

That's what I would like, anybody have any pics of a finished product?
Mike Betti

----- Original Message -----
From: "Bob Andrews" <robert@montanasky.us>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 5:39 PM
Subject: RE: Elite doors

Mike,

Plan on making them seaplane doors .... both doors fully windowed and
hinged
along the top. The forward bottom corner will be removed from the door

to

clear the strut when the door is open. Haven't gotten there yet ...
but
that's the plan.

Bob 612e

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Tuesday, May 31, 2005 3:35 PM
To: rebel-builders@dcsol.com
Subject: Elite doors


Hi all,
Has anyone done anything different with the door/window arrangement on
the Elite? I was thinking on the lines of the way a Super Cub or Husky
do it.
Thanks,
Mike Betti
Elite 771



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Bob Andrews]

... there's a good picture on the MAM site
http://www.murphyair.com/complete/Archer.htm that shows Sam holding the door
where the hinged corner piece is. Sandi ... if your reading this ... sorry
I miss spelled your name in the last post.

Bob 612e

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jones, Michael
Sent: Thursday, June 02, 2005 4:58 AM
To: 'rebel-builders@dcsol.com'
Subject: RE: Elite doors


hi mike

whay are you looking for, gull wing doors ?
i have drawings and all part numbers for ordering
will try to repost the pics and some new asap

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Wednesday, June 01, 2005 8:11 PM
To: rebel-builders@dcsol.com
Subject: Re: Elite doors


I can't find any pics in the arcives. Looks like Mike 007 had some in the
rebel files but they aren't there anymore. Mike do you still have those door

pics.
Thanks,
Mike Betti

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 9:24 PM
Subject: Re: Elite doors

Look in the Rebel section. Sure there are some pics there of gullwing
doors.
My doors swing both ways. Normal front hinged door and up lifting window,
or
bolt the two sections together, remove the front hinge pin and they become
gullwings. Guess I might finally get around to using them that way in the
next few weeks if I ever get those floats on!

Wayne

----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 10:19 PM
Subject: Re: Elite doors

That's what I would like, anybody have any pics of a finished product?
Mike Betti

----- Original Message -----
From: "Bob Andrews" <robert@montanasky.us>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 5:39 PM
Subject: RE: Elite doors

Mike,

Plan on making them seaplane doors .... both doors fully windowed and
hinged
along the top. The forward bottom corner will be removed from the door

to

clear the strut when the door is open. Haven't gotten there yet ...
but
that's the plan.

Bob 612e

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Tuesday, May 31, 2005 3:35 PM
To: rebel-builders@dcsol.com
Subject: Elite doors


Hi all,
Has anyone done anything different with the door/window arrangement on
the Elite? I was thinking on the lines of the way a Super Cub or Husky
do it.
Thanks,
Mike Betti
Elite 771



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jones, Michael]

just up loaded pdf's of my door layout with dimensions for cut out, should
mention that when friend cecil shaw did this design this winter he still had
to cut small oval cutout in the panel that overlaps the bottom of the door
frame, but rest worked pretty good

also not you need to get aluminum tube to slide inside the door frame to
join the top and bottom halves together and leave 12" of overlap each side
to put lots of rivets in it to make the join strong, hope this makes sense

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of Bob
Andrews
Sent: Thursday, June 02, 2005 8:44 AM
To: rebel-builders@dcsol.com
Subject: RE: Elite doors


Hi Mike,

Look forward to seeing them. To get the door demention changes at the
forward lower corners, I'm temporarily installing one of the wings and wing
strut. One solution to the strut clearance issue is to do what Sam and
Sandy did ... The Archer Elite has gull wing doors, and they hinged the
lower front corner section of the door so that it can clear the wing strut
... and it works well. My plan is to gusset the fuselage opening at that
corner and remove the same area from the door.

Bob 612e

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jones, Michael
Sent: Thursday, June 02, 2005 4:58 AM
To: 'rebel-builders@dcsol.com'
Subject: RE: Elite doors


hi mike

whay are you looking for, gull wing doors ?
i have drawings and all part numbers for ordering
will try to repost the pics and some new asap

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Wednesday, June 01, 2005 8:11 PM
To: rebel-builders@dcsol.com
Subject: Re: Elite doors


I can't find any pics in the arcives. Looks like Mike 007 had some in the
rebel files but they aren't there anymore. Mike do you still have those door

pics.
Thanks,
Mike Betti

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 9:24 PM
Subject: Re: Elite doors

Look in the Rebel section. Sure there are some pics there of gullwing
doors.
My doors swing both ways. Normal front hinged door and up lifting window,
or
bolt the two sections together, remove the front hinge pin and they become
gullwings. Guess I might finally get around to using them that way in the
next few weeks if I ever get those floats on!

Wayne

----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 10:19 PM
Subject: Re: Elite doors

That's what I would like, anybody have any pics of a finished product?
Mike Betti

----- Original Message -----
From: "Bob Andrews" <robert@montanasky.us>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 5:39 PM
Subject: RE: Elite doors

Mike,

Plan on making them seaplane doors .... both doors fully windowed and
hinged
along the top. The forward bottom corner will be removed from the door

to

clear the strut when the door is open. Haven't gotten there yet ...
but
that's the plan.

Bob 612e

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Tuesday, May 31, 2005 3:35 PM
To: rebel-builders@dcsol.com
Subject: Elite doors


Hi all,
Has anyone done anything different with the door/window arrangement on
the Elite? I was thinking on the lines of the way a Super Cub or Husky
do it.
Thanks,
Mike Betti
Elite 771



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Gary Gustafson]

I have recently taken over a Rebel project, Kit # 242, and would like to
convert the existing doors to gull wing doors. I also would be very
interested obtaining drawings and all the part numbers for them.

Thanking you in advance for your efforts.

Gary Gustafson

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jones,
Michael
Sent: Thursday, June 02, 2005 6:58 AM
To: 'rebel-builders@dcsol.com'
Subject: RE: Elite doors

hi mike

whay are you looking for, gull wing doors ?
i have drawings and all part numbers for ordering
will try to repost the pics and some new asap

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Wednesday, June 01, 2005 8:11 PM
To: rebel-builders@dcsol.com
Subject: Re: Elite doors


I can't find any pics in the arcives. Looks like Mike 007 had some in the
rebel files but they aren't there anymore. Mike do you still have those door

pics.
Thanks,
Mike Betti

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 9:24 PM
Subject: Re: Elite doors

Look in the Rebel section. Sure there are some pics there of gullwing
doors.
My doors swing both ways. Normal front hinged door and up lifting window,
or
bolt the two sections together, remove the front hinge pin and they become
gullwings. Guess I might finally get around to using them that way in the
next few weeks if I ever get those floats on!

Wayne

----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 10:19 PM
Subject: Re: Elite doors

That's what I would like, anybody have any pics of a finished product?
Mike Betti

----- Original Message -----
From: "Bob Andrews" <robert@montanasky.us>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 5:39 PM
Subject: RE: Elite doors

Mike,

Plan on making them seaplane doors .... both doors fully windowed and
hinged
along the top. The forward bottom corner will be removed from the door

to

clear the strut when the door is open. Haven't gotten there yet ...
but
that's the plan.

Bob 612e

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Tuesday, May 31, 2005 3:35 PM
To: rebel-builders@dcsol.com
Subject: Elite doors


Hi all,
Has anyone done anything different with the door/window arrangement on
the Elite? I was thinking on the lines of the way a Super Cub or Husky
do it.
Thanks,
Mike Betti
Elite 771



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jones, Michael]

partial drawings are posted on website under fuselage

parts list & pics to come

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Gary Gustafson
Sent: Thursday, June 02, 2005 10:04 AM
To: rebel-builders@dcsol.com
Cc: MJones@dcsol.com
Subject: RE: Elite doors


I have recently taken over a Rebel project, Kit # 242, and would like to
convert the existing doors to gull wing doors. I also would be very
interested obtaining drawings and all the part numbers for them.

Thanking you in advance for your efforts.

Gary Gustafson

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jones,
Michael
Sent: Thursday, June 02, 2005 6:58 AM
To: 'rebel-builders@dcsol.com'
Subject: RE: Elite doors

hi mike

whay are you looking for, gull wing doors ?
i have drawings and all part numbers for ordering
will try to repost the pics and some new asap

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Wednesday, June 01, 2005 8:11 PM
To: rebel-builders@dcsol.com
Subject: Re: Elite doors


I can't find any pics in the arcives. Looks like Mike 007 had some in the
rebel files but they aren't there anymore. Mike do you still have those door

pics.
Thanks,
Mike Betti

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 9:24 PM
Subject: Re: Elite doors

Look in the Rebel section. Sure there are some pics there of gullwing
doors.
My doors swing both ways. Normal front hinged door and up lifting window,
or
bolt the two sections together, remove the front hinge pin and they become
gullwings. Guess I might finally get around to using them that way in the
next few weeks if I ever get those floats on!

Wayne

----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 10:19 PM
Subject: Re: Elite doors

That's what I would like, anybody have any pics of a finished product?
Mike Betti

----- Original Message -----
From: "Bob Andrews" <robert@montanasky.us>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 5:39 PM
Subject: RE: Elite doors

Mike,

Plan on making them seaplane doors .... both doors fully windowed and
hinged
along the top. The forward bottom corner will be removed from the door

to

clear the strut when the door is open. Haven't gotten there yet ...
but
that's the plan.

Bob 612e

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Tuesday, May 31, 2005 3:35 PM
To: rebel-builders@dcsol.com
Subject: Elite doors


Hi all,
Has anyone done anything different with the door/window arrangement on
the Elite? I was thinking on the lines of the way a Super Cub or Husky
do it.
Thanks,
Mike Betti
Elite 771



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------










-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Mike Davis]

Gary Gustafson sent me a pic of an Elite with gull wing doors that I have
uploaded to the archives.

Mike

----- Original Message -----

I can't find any pics in the arcives. Looks like Mike 007 had some in the
rebel files but they aren't there anymore. Mike do you still have those
door

pics.
Thanks,
Mike Betti

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Mike Betti]

Got the drawings Mike, thanks.
Does anyone know if the rebel and the elite have the same door dimensions?
Mike Betti
771E
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, June 02, 2005 9:14 AM
Subject: RE: Elite doors

partial drawings are posted on website under fuselage

parts list & pics to come

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Gary Gustafson
Sent: Thursday, June 02, 2005 10:04 AM
To: rebel-builders@dcsol.com
Cc: MJones@dcsol.com
Subject: RE: Elite doors


I have recently taken over a Rebel project, Kit # 242, and would like to
convert the existing doors to gull wing doors. I also would be very
interested obtaining drawings and all the part numbers for them.

Thanking you in advance for your efforts.

Gary Gustafson

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Jones,
Michael
Sent: Thursday, June 02, 2005 6:58 AM
To: 'rebel-builders@dcsol.com'
Subject: RE: Elite doors

hi mike

whay are you looking for, gull wing doors ?
i have drawings and all part numbers for ordering
will try to repost the pics and some new asap

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Wednesday, June 01, 2005 8:11 PM
To: rebel-builders@dcsol.com
Subject: Re: Elite doors


I can't find any pics in the arcives. Looks like Mike 007 had some in the
rebel files but they aren't there anymore. Mike do you still have those
door

pics.
Thanks,
Mike Betti

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 9:24 PM
Subject: Re: Elite doors

Look in the Rebel section. Sure there are some pics there of gullwing
doors.
My doors swing both ways. Normal front hinged door and up lifting window,
or
bolt the two sections together, remove the front hinge pin and they
become
gullwings. Guess I might finally get around to using them that way in the
next few weeks if I ever get those floats on!

Wayne

----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 10:19 PM
Subject: Re: Elite doors

That's what I would like, anybody have any pics of a finished product?
Mike Betti

----- Original Message -----
From: "Bob Andrews" <robert@montanasky.us>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 5:39 PM
Subject: RE: Elite doors

to

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

That is not an Elite! It's a Rebel...and FWIW...you don't need that high of
a wedge taken out of the frame to clear the strut.

Cheers,
Wayne

----- Original Message -----
From: "Mike Davis" <mike.davis@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Thursday, June 02, 2005 2:57 PM
Subject: Re: Elite doors

Gary Gustafson sent me a pic of an Elite with gull wing doors that I have
uploaded to the archives.

Mike

----- Original Message -----

I can't find any pics in the arcives. Looks like Mike 007 had some in

the

rebel files but they aren't there anymore. Mike do you still have those
door

pics.
Thanks,
Mike Betti

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Mike Davis]

OK, moved the pic from the Elite area to the Rebel area.

Mike

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, June 02, 2005 5:12 PM
Subject: Re: Elite doors

That is not an Elite! It's a Rebel...and FWIW...you don't need that high
of
a wedge taken out of the frame to clear the strut.

Cheers,
Wayne

----- Original Message -----
From: "Mike Davis" <mike.davis@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Thursday, June 02, 2005 2:57 PM
Subject: Re: Elite doors

Gary Gustafson sent me a pic of an Elite with gull wing doors that I have
uploaded to the archives.

Mike

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------