3/32" rivets for nutplates

[bscheube]

Hello all,
I have a question about the type of rivets everyone is using on the nutplates?
I purchased some 3/32" cherry rivets and when I use either the pneumatic or
manual puller it flares the rivet but pulls the mandrel all the way out? this
does not seem right. I asked the seller but he could not help me???? Does a
cherry rivet have a special puller? Am I doing somthing wrong? do I need a
different rivet manufacture? thanks Bob Scheuber moose 191



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jones, Michael]

i use these cherry rivets all the time on my panel and as far as i know the
mandrel pulls all the way out, least that's what i have been doing
i find i have to use hand riveter as well, seems to be easier to pull them
for me anyway

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
bscheube@dcsol.com
Sent: Tuesday, May 31, 2005 11:06 AM
To: rebel-builders@dcsol.com
Subject: 3/32" rivets for nutplates


Hello all,
I have a question about the type of rivets everyone is using on the
nutplates?
I purchased some 3/32" cherry rivets and when I use either the pneumatic or
manual puller it flares the rivet but pulls the mandrel all the way out?
this
does not seem right. I asked the seller but he could not help me???? Does a
cherry rivet have a special puller? Am I doing somthing wrong? do I need a
different rivet manufacture? thanks Bob Scheuber moose 191



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Jason Beall]

Mine too. Think thats how they work.

-Jason


--- "Jones, Michael" <MJones@hatch.ca> wrote:

i use these cherry rivets all the time on my panel
and as far as i know the
mandrel pulls all the way out, least that's what i
have been doing
i find i have to use hand riveter as well, seems to
be easier to pull them
for me anyway

mike#007

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
bscheube@dcsol.com
Sent: Tuesday, May 31, 2005 11:06 AM
To: rebel-builders@dcsol.com
Subject: 3/32" rivets for nutplates


Hello all,
I have a question about the type of rivets everyone
is using on the
nutplates?
I purchased some 3/32" cherry rivets and when I use
either the pneumatic or
manual puller it flares the rivet but pulls the
mandrel all the way out?
this
does not seem right. I asked the seller but he could
not help me???? Does a
cherry rivet have a special puller? Am I doing
somthing wrong? do I need a
different rivet manufacture? thanks Bob Scheuber
moose 191

-----------------------------------------------------------------

List archives located at:
https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:

https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------
----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It
may also be
confidential and/or privileged. If you are not the
intended recipient
of this message you are hereby notified that you
must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please
notify
HATCH immediately via mailto:MailAdmin@hatch.ca.

-----------------------------------------------------------------

List archives located at:
https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:

https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com

-----------------------------------------------------------------

________________________________________________

Jason Beall
Super Rebel No. 131
Aberdeen, Scotland, UK
super_rebel131@yahoo.com

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Al Paxhia]

Bob,
That is my experience also with those rivets. I don't like them and have
gone to using 3/32" cs solid rivet most of the time.
Al
----- Original Message -----
From: <bscheube@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 8:06 AM
Subject: 3/32" rivets for nutplates

Hello all,
I have a question about the type of rivets everyone is using on the
nutplates?
I purchased some 3/32" cherry rivets and when I use either the pneumatic
or
manual puller it flares the rivet but pulls the mandrel all the way out?
this
does not seem right. I asked the seller but he could not help me???? Does
a
cherry rivet have a special puller? Am I doing somthing wrong? do I need a
different rivet manufacture? thanks Bob Scheuber moose 191



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

DITTO ! Wayne

----- Original Message -----
From: "Al Paxhia" <paxhia2@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 12:55 PM
Subject: Re: 3/32" rivets for nutplates

Bob,
That is my experience also with those rivets. I don't like them and have
gone to using 3/32" cs solid rivet most of the time.
Al
----- Original Message -----
From: <bscheube@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, May 31, 2005 8:06 AM
Subject: 3/32" rivets for nutplates

Hello all,
I have a question about the type of rivets everyone is using on the
nutplates?
I purchased some 3/32" cherry rivets and when I use either the pneumatic
or
manual puller it flares the rivet but pulls the mandrel all the way out?
this
does not seem right. I asked the seller but he could not help me????

Does

a
cherry rivet have a special puller? Am I doing somthing wrong? do I need

a

different rivet manufacture? thanks Bob Scheuber moose 191



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------