Wing skin doubler

[Mike Betti]

The wing skin doubler that goes to the bottom skin, the manual says 4
3/4" and 3 1/2" for the two holes in it. The holes in the LE and main
skin both have 3 1/2" holes in them already. I don't want to open up one
of those holes to 4 3/4" if not needed. The manual says to drill them
but they were already in the skins. So what size holes do the builders
have for these two?
Also, I have the nut plates for the hinges, do I still cut the
inspection holes?
Thanks,
Mike Betti
771 Elite



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

If the holes are there already U sure don't need to make them any bigger.
You'll never really need in there anyhow! As for the smaller holes, that
they now show to cut at each aileron hinge..NO you don't need to go thru
that hassle... now that I shipped you those anchor nuts!

Wayne

----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, March 27, 2005 12:31 PM
Subject: Wing skin doubler

The wing skin doubler that goes to the bottom skin, the manual says 4
3/4" and 3 1/2" for the two holes in it. The holes in the LE and main
skin both have 3 1/2" holes in them already. I don't want to open up one
of those holes to 4 3/4" if not needed. The manual says to drill them
but they were already in the skins. So what size holes do the builders
have for these two?
Also, I have the nut plates for the hinges, do I still cut the
inspection holes?
Thanks,
Mike Betti
771 Elite



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------