Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

firewall forward info

Converted from Wildcat! database. (read only)
Locked
Alan Hepburn

firewall forward info

Post by Alan Hepburn » Sat Feb 18, 2012 10:20 am

On the parts list, there seems to be some general interest. I will see if I
can OCR it and upload it as a .doc, as it would be a big upload otherwise.

The airbox is fine. I think I have some pics on Wildcat, but it's a little
tricky interfacing the front end to the Elite speed cowl. You have to cut
the bracket. Again, I uploaded a pic. to the Elite section (engines, I
think)

Al
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, March 21, 2005 8:00 AM
Subject: RE: firewall forward info

how was the vans carb air box, can you send copy of list, have vans affles
aready, what about cable mount bracket, how was it for fit

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Alan Hepburn
Sent: Friday, March 18, 2005 5:09 PM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info


Mike:

I have their O320 parts list for the Elite, sent to me by MAM. Probably
the
easiest would be if you could give me a fax number. I didn't buy the
whole
thing, but picked those items I needed. While you may well have some
parts
left over, the kit is far from complete. You've probably noticed that, as
you progress through the building, the quality of the instructions goes
downhill. Well, when you get ahead of the firewall, the downhill path
continues! Of couse, there are so many permutaions ahead of the firewall
that I guess that is to be expected.

In my Elite, I put in an Aerosport Power O360, Airwolf filter, Vans
baffles,
a Vans carb air box, Vans bracket to support the cables going to the carb,
Vans spinner and Pasma 2 ignition on the right side, so if you want some
comments on any of these, drop me a line.

Regards, Al


----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info

hi all

does anyone out there have parts list for an 0-320 murphy firewall
forward
kit, the one i have says 0-235 on it and needless to say as i compared
it
to
the 0-320 install manual the parts listed dont all match, i might also
add
the prices murphy charges for this kit are insane, the major items such
as
lord mounts are at least double in us dollars the spruce price

thanx

mike

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Bob Patterson

firewall forward info

Post by Bob Patterson » Sat Feb 18, 2012 10:20 am

Thanks Al !

Could you please make that a RTF file instead of DOC ?? Fewer
of us using Micro$loth stuff every day ! ;-)

.......bobp

-------------------------------orig.-------------------------
On Monday 21 March 2005 08:01 pm, Alan Hepburn wrote:
On the parts list, there seems to be some general interest. I will see if I
can OCR it and upload it as a .doc, as it would be a big upload otherwise.

The airbox is fine. I think I have some pics on Wildcat, but it's a little
tricky interfacing the front end to the Elite speed cowl. You have to cut
the bracket. Again, I uploaded a pic. to the Elite section (engines, I
think)

Al
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, March 21, 2005 8:00 AM
Subject: RE: firewall forward info

how was the vans carb air box, can you send copy of list, have vans affles
aready, what about cable mount bracket, how was it for fit

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Alan Hepburn
Sent: Friday, March 18, 2005 5:09 PM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info


Mike:

I have their O320 parts list for the Elite, sent to me by MAM. Probably
the
easiest would be if you could give me a fax number. I didn't buy the
whole
thing, but picked those items I needed. While you may well have some
parts
left over, the kit is far from complete. You've probably noticed that, as
you progress through the building, the quality of the instructions goes
downhill. Well, when you get ahead of the firewall, the downhill path
continues! Of couse, there are so many permutaions ahead of the firewall
that I guess that is to be expected.

In my Elite, I put in an Aerosport Power O360, Airwolf filter, Vans
baffles,
a Vans carb air box, Vans bracket to support the cables going to the carb,
Vans spinner and Pasma 2 ignition on the right side, so if you want some
comments on any of these, drop me a line.

Regards, Al


----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info

hi all

does anyone out there have parts list for an 0-320 murphy firewall
forward
kit, the one i have says 0-235 on it and needless to say as i compared
it
to
the 0-320 install manual the parts listed dont all match, i might also
add
the prices murphy charges for this kit are insane, the major items such
as
lord mounts are at least double in us dollars the spruce price

thanx

mike

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Alan Hepburn

firewall forward info

Post by Alan Hepburn » Sat Feb 18, 2012 10:20 am

I doubt it, Bob. Last time I checked, Bill was still doing OK. Too late, I
just uploaded it. If somebody really wants it, I can do it again in RTF.

Al
----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, March 21, 2005 9:54 PM
Subject: Re: firewall forward info

Thanks Al !

Could you please make that a RTF file instead of DOC ?? Fewer
of us using Micro$loth stuff every day ! ;-)

.......bobp

-------------------------------orig.-------------------------
On Monday 21 March 2005 08:01 pm, Alan Hepburn wrote:
On the parts list, there seems to be some general interest. I will see
if I
can OCR it and upload it as a .doc, as it would be a big upload
otherwise.
The airbox is fine. I think I have some pics on Wildcat, but it's a
little
tricky interfacing the front end to the Elite speed cowl. You have to
cut
the bracket. Again, I uploaded a pic. to the Elite section (engines, I
think)

Al
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, March 21, 2005 8:00 AM
Subject: RE: firewall forward info

how was the vans carb air box, can you send copy of list, have vans
affles
aready, what about cable mount bracket, how was it for fit

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Alan Hepburn
Sent: Friday, March 18, 2005 5:09 PM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info


Mike:

I have their O320 parts list for the Elite, sent to me by MAM.
Probably
the
easiest would be if you could give me a fax number. I didn't buy the
whole
thing, but picked those items I needed. While you may well have some
parts
left over, the kit is far from complete. You've probably noticed
that, as
you progress through the building, the quality of the instructions
goes
downhill. Well, when you get ahead of the firewall, the downhill path
continues! Of couse, there are so many permutaions ahead of the
firewall
that I guess that is to be expected.

In my Elite, I put in an Aerosport Power O360, Airwolf filter, Vans
baffles,
a Vans carb air box, Vans bracket to support the cables going to the
carb,
Vans spinner and Pasma 2 ignition on the right side, so if you want
some
comments on any of these, drop me a line.

Regards, Al


----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info

forward
compared
it
to
also
add
such
as
----------------------------------------------------------------------
recipient
disseminate,



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Mike Davis

firewall forward info

Post by Mike Davis » Sat Feb 18, 2012 10:20 am

Hey Al... if it doesn't come out good using OCR, just scan and send me the
pic... I'll convert to PDF.

Mike

----- Original Message -----
From: "Alan Hepburn" <ahepburn@renc.igs.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, March 21, 2005 4:01 PM
Subject: Re: firewall forward info

On the parts list, there seems to be some general interest. I will see if
I
can OCR it and upload it as a .doc, as it would be a big upload otherwise.

The airbox is fine. I think I have some pics on Wildcat, but it's a
little
tricky interfacing the front end to the Elite speed cowl. You have to cut
the bracket. Again, I uploaded a pic. to the Elite section (engines, I
think)

Al
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, March 21, 2005 8:00 AM
Subject: RE: firewall forward info

how was the vans carb air box, can you send copy of list, have vans
affles
aready, what about cable mount bracket, how was it for fit

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Alan Hepburn
Sent: Friday, March 18, 2005 5:09 PM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info


Mike:

I have their O320 parts list for the Elite, sent to me by MAM. Probably
the
easiest would be if you could give me a fax number. I didn't buy the
whole
thing, but picked those items I needed. While you may well have some
parts
left over, the kit is far from complete. You've probably noticed that,
as
you progress through the building, the quality of the instructions goes
downhill. Well, when you get ahead of the firewall, the downhill path
continues! Of couse, there are so many permutaions ahead of the firewall
that I guess that is to be expected.

In my Elite, I put in an Aerosport Power O360, Airwolf filter, Vans
baffles,
a Vans carb air box, Vans bracket to support the cables going to the
carb,
Vans spinner and Pasma 2 ignition on the right side, so if you want some
comments on any of these, drop me a line.

Regards, Al


----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info

hi all

does anyone out there have parts list for an 0-320 murphy firewall
forward
kit, the one i have says 0-235 on it and needless to say as i compared
it
to
the 0-320 install manual the parts listed dont all match, i might also
add
the prices murphy charges for this kit are insane, the major items such
as
lord mounts are at least double in us dollars the spruce price

thanx

mike

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Mike Davis

firewall forward info

Post by Mike Davis » Sat Feb 18, 2012 10:20 am

I went ahead and converted to PDF... both are now available.

Mike

----- Original Message -----
From: "Alan Hepburn" <ahepburn@renc.igs.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, March 21, 2005 6:31 PM
Subject: Re: firewall forward info

I doubt it, Bob. Last time I checked, Bill was still doing OK. Too late,
I
just uploaded it. If somebody really wants it, I can do it again in RTF.

Al
----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, March 21, 2005 9:54 PM
Subject: Re: firewall forward info

Thanks Al !

Could you please make that a RTF file instead of DOC ?? Fewer
of us using Micro$loth stuff every day ! ;-)

.......bobp

-------------------------------orig.-------------------------
On Monday 21 March 2005 08:01 pm, Alan Hepburn wrote:
On the parts list, there seems to be some general interest. I will see
if I
can OCR it and upload it as a .doc, as it would be a big upload
otherwise.
The airbox is fine. I think I have some pics on Wildcat, but it's a
little
tricky interfacing the front end to the Elite speed cowl. You have to
cut
the bracket. Again, I uploaded a pic. to the Elite section (engines, I
think)

Al
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, March 21, 2005 8:00 AM
Subject: RE: firewall forward info

affles
Probably
the whole parts
that, as
goes
firewall
baffles,
carb,
some
forward
compared
it
also
add
such
as
----------------------------------------------------------------------
recipient
disseminate,



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”