hi all
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it to
the 0-320 install manual the parts listed dont all match, i might also add
the prices murphy charges for this kit are insane, the major items such as
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
firewall forward info
-
Keith B. Oliver
firewall forward info
I ordered the firewall forward kit (0-320) with mine. After pricing their
parts list with what I could identify in catalogs it seemed
like a good idea. That was in 1999 for an Elite with a Murphy Sun N Fun
discount. Now having just about finished the engine
setup I would not do it again. It appears I will have a fair amount of items
that I will not be using. This is either due to
parts not required for my setup or they will not adapt themselves to my
installation i.e.... hoses not long enough, fittings not being the right
size. I suggest except for the motor mount, after deciding what you are
going to do under the cowl you shop around.
Keith Oliver
Elite N654ME (reserved)
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jones, Michael
Sent: Friday, March 18, 2005 7:45 AM
To: Rebel-Builders EMIAL (E-mail)
Subject: firewall forward info
hi all
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it to
the 0-320 install manual the parts listed dont all match, i might also add
the prices murphy charges for this kit are insane, the major items such as
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
parts list with what I could identify in catalogs it seemed
like a good idea. That was in 1999 for an Elite with a Murphy Sun N Fun
discount. Now having just about finished the engine
setup I would not do it again. It appears I will have a fair amount of items
that I will not be using. This is either due to
parts not required for my setup or they will not adapt themselves to my
installation i.e.... hoses not long enough, fittings not being the right
size. I suggest except for the motor mount, after deciding what you are
going to do under the cowl you shop around.
Keith Oliver
Elite N654ME (reserved)
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jones, Michael
Sent: Friday, March 18, 2005 7:45 AM
To: Rebel-Builders EMIAL (E-mail)
Subject: firewall forward info
hi all
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it to
the 0-320 install manual the parts listed dont all match, i might also add
the prices murphy charges for this kit are insane, the major items such as
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
LisaFly99
firewall forward info
In a message dated 3/18/2005 6:45:31 A.M. Central Standard Time,
MJones@HATCH.CA writes:
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it to
the 0-320 install manual the parts listed dont all match,
MIKE
I had shipping list around here somewhere, from kit 281. For 0-320 FWF I'll
see if I can find it.
PDSmith
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
MJones@HATCH.CA writes:
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it to
the 0-320 install manual the parts listed dont all match,
MIKE
I had shipping list around here somewhere, from kit 281. For 0-320 FWF I'll
see if I can find it.
PDSmith
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Jones, Michael
firewall forward info
KEITH
any chance you can send me copy of your parts list for firewall forward,
mine sucks
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Keith B. Oliver
Sent: Friday, March 18, 2005 9:26 AM
To: rebel-builders@dcsol.com
Subject: RE: firewall forward info
I ordered the firewall forward kit (0-320) with mine. After pricing their
parts list with what I could identify in catalogs it seemed
like a good idea. That was in 1999 for an Elite with a Murphy Sun N Fun
discount. Now having just about finished the engine
setup I would not do it again. It appears I will have a fair amount of items
that I will not be using. This is either due to
parts not required for my setup or they will not adapt themselves to my
installation i.e.... hoses not long enough, fittings not being the right
size. I suggest except for the motor mount, after deciding what you are
going to do under the cowl you shop around.
Keith Oliver
Elite N654ME (reserved)
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jones, Michael
Sent: Friday, March 18, 2005 7:45 AM
To: Rebel-Builders EMIAL (E-mail)
Subject: firewall forward info
hi all
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it to
the 0-320 install manual the parts listed dont all match, i might also add
the prices murphy charges for this kit are insane, the major items such as
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
any chance you can send me copy of your parts list for firewall forward,
mine sucks
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Keith B. Oliver
Sent: Friday, March 18, 2005 9:26 AM
To: rebel-builders@dcsol.com
Subject: RE: firewall forward info
I ordered the firewall forward kit (0-320) with mine. After pricing their
parts list with what I could identify in catalogs it seemed
like a good idea. That was in 1999 for an Elite with a Murphy Sun N Fun
discount. Now having just about finished the engine
setup I would not do it again. It appears I will have a fair amount of items
that I will not be using. This is either due to
parts not required for my setup or they will not adapt themselves to my
installation i.e.... hoses not long enough, fittings not being the right
size. I suggest except for the motor mount, after deciding what you are
going to do under the cowl you shop around.
Keith Oliver
Elite N654ME (reserved)
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jones, Michael
Sent: Friday, March 18, 2005 7:45 AM
To: Rebel-Builders EMIAL (E-mail)
Subject: firewall forward info
hi all
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it to
the 0-320 install manual the parts listed dont all match, i might also add
the prices murphy charges for this kit are insane, the major items such as
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Jones, Michael
firewall forward info
that would be great, thanks
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
LisaFly99@aol.com
Sent: Friday, March 18, 2005 9:28 AM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info
In a message dated 3/18/2005 6:45:31 A.M. Central Standard Time,
MJones@HATCH.CA writes:
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it
to
the 0-320 install manual the parts listed dont all match,
MIKE
I had shipping list around here somewhere, from kit 281. For 0-320 FWF I'll
see if I can find it.
PDSmith
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
LisaFly99@aol.com
Sent: Friday, March 18, 2005 9:28 AM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info
In a message dated 3/18/2005 6:45:31 A.M. Central Standard Time,
MJones@HATCH.CA writes:
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it
to
the 0-320 install manual the parts listed dont all match,
MIKE
I had shipping list around here somewhere, from kit 281. For 0-320 FWF I'll
see if I can find it.
PDSmith
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Wayne G. O'Shea
firewall forward info
Working on Corporate returns Mike, so would be sometime next week (at the
earliest) before I can dig out an old O-320 FWF list for yah, hopefully
someone else can help you out.
BTW, on the conical mounting engine the only rubbers that work properly to
hold the engine out from the mount, otherwise rear intake tubes rub the
mount (worse) if just using the standard rubber ones, are the Lord J6230-1's
with the steel inserts (Believe these are Decathelon rubbers). I recently
bought 4 that I thought I'd just grab for stock and darn near needed a bank
manager to accept delivery. $132.00 EACH from Leavens...AFTER my
discount.......or $528 + Taxes per set!
Wayne
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
earliest) before I can dig out an old O-320 FWF list for yah, hopefully
someone else can help you out.
BTW, on the conical mounting engine the only rubbers that work properly to
hold the engine out from the mount, otherwise rear intake tubes rub the
mount (worse) if just using the standard rubber ones, are the Lord J6230-1's
with the steel inserts (Believe these are Decathelon rubbers). I recently
bought 4 that I thought I'd just grab for stock and darn near needed a bank
manager to accept delivery. $132.00 EACH from Leavens...AFTER my
discount.......or $528 + Taxes per set!
Wayne
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
tohi all
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it
the 0-320 install manual the parts listed dont all match, i might also add
the prices murphy charges for this kit are insane, the major items such as
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Wayne G. O'Shea
firewall forward info
I also just did a quick search on Aircraft Spruces price and they are $78 US
x ~1.30 these days = $101.40cdn Each.
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 9:35 AM
Subject: Re: firewall forward info
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
x ~1.30 these days = $101.40cdn Each.
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 9:35 AM
Subject: Re: firewall forward info
J6230-1'sWorking on Corporate returns Mike, so would be sometime next week (at the
earliest) before I can dig out an old O-320 FWF list for yah, hopefully
someone else can help you out.
BTW, on the conical mounting engine the only rubbers that work properly to
hold the engine out from the mount, otherwise rear intake tubes rub the
mount (worse) if just using the standard rubber ones, are the Lord
bankwith the steel inserts (Believe these are Decathelon rubbers). I recently
bought 4 that I thought I'd just grab for stock and darn near needed a
forwardmanager to accept delivery. $132.00 EACH from Leavens...AFTER my
discount.......or $528 + Taxes per set!
Wayne
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
hi all
does anyone out there have parts list for an 0-320 murphy firewall
itkit, the one i have says 0-235 on it and needless to say as i compared
addtothe 0-320 install manual the parts listed dont all match, i might also
asthe prices murphy charges for this kit are insane, the major items such
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Jones, Michael
firewall forward info
HI WAYNE
ya thats the mounts j6230-1, murphy want 598 usd for 4, highway robbery,
think its auto conversion time for me, i am not paying to finance Murphy
retirement, also noted that the 0-320 install manual does not show to use
these mounts, so as usual it all screwed up
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Friday, March 18, 2005 9:35 AM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info
Working on Corporate returns Mike, so would be sometime next week (at the
earliest) before I can dig out an old O-320 FWF list for yah, hopefully
someone else can help you out.
BTW, on the conical mounting engine the only rubbers that work properly to
hold the engine out from the mount, otherwise rear intake tubes rub the
mount (worse) if just using the standard rubber ones, are the Lord J6230-1's
with the steel inserts (Believe these are Decathelon rubbers). I recently
bought 4 that I thought I'd just grab for stock and darn near needed a bank
manager to accept delivery. $132.00 EACH from Leavens...AFTER my
discount.......or $528 + Taxes per set!
Wayne
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
ya thats the mounts j6230-1, murphy want 598 usd for 4, highway robbery,
think its auto conversion time for me, i am not paying to finance Murphy
retirement, also noted that the 0-320 install manual does not show to use
these mounts, so as usual it all screwed up
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Friday, March 18, 2005 9:35 AM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info
Working on Corporate returns Mike, so would be sometime next week (at the
earliest) before I can dig out an old O-320 FWF list for yah, hopefully
someone else can help you out.
BTW, on the conical mounting engine the only rubbers that work properly to
hold the engine out from the mount, otherwise rear intake tubes rub the
mount (worse) if just using the standard rubber ones, are the Lord J6230-1's
with the steel inserts (Believe these are Decathelon rubbers). I recently
bought 4 that I thought I'd just grab for stock and darn near needed a bank
manager to accept delivery. $132.00 EACH from Leavens...AFTER my
discount.......or $528 + Taxes per set!
Wayne
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
tohi all
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it
the 0-320 install manual the parts listed dont all match, i might also add
the prices murphy charges for this kit are insane, the major items such as
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Wayne G. O'Shea
firewall forward info
Manual is written for the Dynafocal mount. Not a big deal. The price of the
J6230's on the other hand is, if that is what they are quoting. Doesn't make
sense to me...sure that's not the price for a steel mount itself!?
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 10:00 AM
Subject: RE: firewall forward info
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
J6230's on the other hand is, if that is what they are quoting. Doesn't make
sense to me...sure that's not the price for a steel mount itself!?
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 10:00 AM
Subject: RE: firewall forward info
J6230-1'sHI WAYNE
ya thats the mounts j6230-1, murphy want 598 usd for 4, highway robbery,
think its auto conversion time for me, i am not paying to finance Murphy
retirement, also noted that the 0-320 install manual does not show to use
these mounts, so as usual it all screwed up
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Friday, March 18, 2005 9:35 AM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info
Working on Corporate returns Mike, so would be sometime next week (at the
earliest) before I can dig out an old O-320 FWF list for yah, hopefully
someone else can help you out.
BTW, on the conical mounting engine the only rubbers that work properly to
hold the engine out from the mount, otherwise rear intake tubes rub the
mount (worse) if just using the standard rubber ones, are the Lord
bankwith the steel inserts (Believe these are Decathelon rubbers). I recently
bought 4 that I thought I'd just grab for stock and darn near needed a
forwardmanager to accept delivery. $132.00 EACH from Leavens...AFTER my
discount.......or $528 + Taxes per set!
Wayne
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
hi all
does anyone out there have parts list for an 0-320 murphy firewall
itkit, the one i have says 0-235 on it and needless to say as i compared
addtothe 0-320 install manual the parts listed dont all match, i might also
asthe prices murphy charges for this kit are insane, the major items such
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Alan Hepburn
firewall forward info
Mike:
I have their O320 parts list for the Elite, sent to me by MAM. Probably the
easiest would be if you could give me a fax number. I didn't buy the whole
thing, but picked those items I needed. While you may well have some parts
left over, the kit is far from complete. You've probably noticed that, as
you progress through the building, the quality of the instructions goes
downhill. Well, when you get ahead of the firewall, the downhill path
continues! Of couse, there are so many permutaions ahead of the firewall
that I guess that is to be expected.
In my Elite, I put in an Aerosport Power O360, Airwolf filter, Vans baffles,
a Vans carb air box, Vans bracket to support the cables going to the carb,
Vans spinner and Pasma 2 ignition on the right side, so if you want some
comments on any of these, drop me a line.
Regards, Al
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I have their O320 parts list for the Elite, sent to me by MAM. Probably the
easiest would be if you could give me a fax number. I didn't buy the whole
thing, but picked those items I needed. While you may well have some parts
left over, the kit is far from complete. You've probably noticed that, as
you progress through the building, the quality of the instructions goes
downhill. Well, when you get ahead of the firewall, the downhill path
continues! Of couse, there are so many permutaions ahead of the firewall
that I guess that is to be expected.
In my Elite, I put in an Aerosport Power O360, Airwolf filter, Vans baffles,
a Vans carb air box, Vans bracket to support the cables going to the carb,
Vans spinner and Pasma 2 ignition on the right side, so if you want some
comments on any of these, drop me a line.
Regards, Al
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
tohi all
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it
the 0-320 install manual the parts listed dont all match, i might also add
the prices murphy charges for this kit are insane, the major items such as
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Alan Hepburn
firewall forward info
Mike:
I had look at my list. It is headed "Elite Lycoming 235/320/360 Dyna-focal
Engine Mount Package March 22/99", is 7 pages long, and has 106 line items.
Let me know if it's any use to you.
Al
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I had look at my list. It is headed "Elite Lycoming 235/320/360 Dyna-focal
Engine Mount Package March 22/99", is 7 pages long, and has 106 line items.
Let me know if it's any use to you.
Al
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
tohi all
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it
the 0-320 install manual the parts listed dont all match, i might also add
the prices murphy charges for this kit are insane, the major items such as
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Wayne G. O'Shea
firewall forward info
I talked with Stephane from Murphy today and they are SERIOUSLY interested
in keeping the builders happy. If they can't beat a direct price on parts,
unfortuately, all they can do is advise where to buy direct to keep you
happy. It's unfortunate, but if they can't get if for any less than you can
direct they of course have to cover the +'s of shipping /brokerage/handling
etc on the resale. The price on the sheets that Nancy is quoting from
haven't changed in some time and I'm told it was apparently $496US....not
$598 that Mike was quoted. This is still of course higher than you can buy
direct from ACS and you can pay the shipping/credit card mark up/brokerage
etc. yourself if you go this route. My purchase from Leavens in Toronto, to
keep some of our money this side of the imaginary line, was $528cdn+taxes
(after my discount) and that equates to ~$410US. Pretty darn close to
Murphy's quoted list price. Leavens before discount price was $167cdn each x
4 = $668cdn or $513US. IF you walked in off the street to Leavens, without a
commercial account, this is what you would pay.
I guess I'm posting this up because negative posts don't improve our supply
route. The guys/gals at MAM are more than willing to work with you >>IF<<
you give them the chance. The place has turned around significantly in the
last while, lets not beat them "underground" again!
Wayne
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 4:00 PM
Subject: Re: firewall forward info
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
in keeping the builders happy. If they can't beat a direct price on parts,
unfortuately, all they can do is advise where to buy direct to keep you
happy. It's unfortunate, but if they can't get if for any less than you can
direct they of course have to cover the +'s of shipping /brokerage/handling
etc on the resale. The price on the sheets that Nancy is quoting from
haven't changed in some time and I'm told it was apparently $496US....not
$598 that Mike was quoted. This is still of course higher than you can buy
direct from ACS and you can pay the shipping/credit card mark up/brokerage
etc. yourself if you go this route. My purchase from Leavens in Toronto, to
keep some of our money this side of the imaginary line, was $528cdn+taxes
(after my discount) and that equates to ~$410US. Pretty darn close to
Murphy's quoted list price. Leavens before discount price was $167cdn each x
4 = $668cdn or $513US. IF you walked in off the street to Leavens, without a
commercial account, this is what you would pay.
I guess I'm posting this up because negative posts don't improve our supply
route. The guys/gals at MAM are more than willing to work with you >>IF<<
you give them the chance. The place has turned around significantly in the
last while, lets not beat them "underground" again!
Wayne
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 4:00 PM
Subject: Re: firewall forward info
theManual is written for the Dynafocal mount. Not a big deal. The price of
makeJ6230's on the other hand is, if that is what they are quoting. Doesn't
usesense to me...sure that's not the price for a steel mount itself!?
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 10:00 AM
Subject: RE: firewall forward info
HI WAYNE
ya thats the mounts j6230-1, murphy want 598 usd for 4, highway robbery,
think its auto conversion time for me, i am not paying to finance Murphy
retirement, also noted that the 0-320 install manual does not show to
thethese mounts, so as usual it all screwed up
mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Friday, March 18, 2005 9:35 AM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info
Working on Corporate returns Mike, so would be sometime next week (at
toearliest) before I can dig out an old O-320 FWF list for yah, hopefully
someone else can help you out.
BTW, on the conical mounting engine the only rubbers that work properly
recentlyJ6230-1'shold the engine out from the mount, otherwise rear intake tubes rub the
mount (worse) if just using the standard rubber ones, are the Lordwith the steel inserts (Believe these are Decathelon rubbers). I
suchbankbought 4 that I thought I'd just grab for stock and darn near needed aforwardmanager to accept delivery. $132.00 EACH from Leavens...AFTER my
discount.......or $528 + Taxes per set!
Wayne
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
hi all
does anyone out there have parts list for an 0-320 murphy firewallitkit, the one i have says 0-235 on it and needless to say as i comparedaddtothe 0-320 install manual the parts listed dont all match, i might alsothe prices murphy charges for this kit are insane, the major items
aslord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Ralph Baker
firewall forward info
----- Original Message -----
From: "Alan Hepburn" <ahepburn@renc.igs.net>
To: <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 5:08 PM
Subject: Re: firewall forward info
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
From: "Alan Hepburn" <ahepburn@renc.igs.net>
To: <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 5:08 PM
Subject: Re: firewall forward info
theMike:
I have their O320 parts list for the Elite, sent to me by MAM. Probably
wholeeasiest would be if you could give me a fax number. I didn't buy the
partsthing, but picked those items I needed. While you may well have some
baffles,left over, the kit is far from complete. You've probably noticed that, as
you progress through the building, the quality of the instructions goes
downhill. Well, when you get ahead of the firewall, the downhill path
continues! Of couse, there are so many permutaions ahead of the firewall
that I guess that is to be expected.
In my Elite, I put in an Aerosport Power O360, Airwolf filter, Vans
forwarda Vans carb air box, Vans bracket to support the cables going to the carb,
Vans spinner and Pasma 2 ignition on the right side, so if you want some
comments on any of these, drop me a line.
Regards, Al
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
hi all
does anyone out there have parts list for an 0-320 murphy firewall
itkit, the one i have says 0-235 on it and needless to say as i compared
addtothe 0-320 install manual the parts listed dont all match, i might also
asthe prices murphy charges for this kit are insane, the major items such
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Jones, Michael
firewall forward info
hi raplh
fax number is as follows 905-855-8270, appreciate the list
mike
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Ralph Baker
Sent: Friday, March 18, 2005 8:18 PM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info
----- Original Message -----
From: "Alan Hepburn" <ahepburn@renc.igs.net>
To: <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 5:08 PM
Subject: Re: firewall forward info
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
fax number is as follows 905-855-8270, appreciate the list
mike
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Ralph Baker
Sent: Friday, March 18, 2005 8:18 PM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info
----- Original Message -----
From: "Alan Hepburn" <ahepburn@renc.igs.net>
To: <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 5:08 PM
Subject: Re: firewall forward info
theMike:
I have their O320 parts list for the Elite, sent to me by MAM. Probably
wholeeasiest would be if you could give me a fax number. I didn't buy the
partsthing, but picked those items I needed. While you may well have some
baffles,left over, the kit is far from complete. You've probably noticed that, as
you progress through the building, the quality of the instructions goes
downhill. Well, when you get ahead of the firewall, the downhill path
continues! Of couse, there are so many permutaions ahead of the firewall
that I guess that is to be expected.
In my Elite, I put in an Aerosport Power O360, Airwolf filter, Vans
forwarda Vans carb air box, Vans bracket to support the cables going to the carb,
Vans spinner and Pasma 2 ignition on the right side, so if you want some
comments on any of these, drop me a line.
Regards, Al
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
hi all
does anyone out there have parts list for an 0-320 murphy firewall
itkit, the one i have says 0-235 on it and needless to say as i compared
addtothe 0-320 install manual the parts listed dont all match, i might also
asthe prices murphy charges for this kit are insane, the major items such
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Jones, Michael
firewall forward info
how was the vans carb air box, can you send copy of list, have vans affles
aready, what about cable mount bracket, how was it for fit
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Alan Hepburn
Sent: Friday, March 18, 2005 5:09 PM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info
Mike:
I have their O320 parts list for the Elite, sent to me by MAM. Probably the
easiest would be if you could give me a fax number. I didn't buy the whole
thing, but picked those items I needed. While you may well have some parts
left over, the kit is far from complete. You've probably noticed that, as
you progress through the building, the quality of the instructions goes
downhill. Well, when you get ahead of the firewall, the downhill path
continues! Of couse, there are so many permutaions ahead of the firewall
that I guess that is to be expected.
In my Elite, I put in an Aerosport Power O360, Airwolf filter, Vans baffles,
a Vans carb air box, Vans bracket to support the cables going to the carb,
Vans spinner and Pasma 2 ignition on the right side, so if you want some
comments on any of these, drop me a line.
Regards, Al
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
aready, what about cable mount bracket, how was it for fit
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Alan Hepburn
Sent: Friday, March 18, 2005 5:09 PM
To: rebel-builders@dcsol.com
Subject: Re: firewall forward info
Mike:
I have their O320 parts list for the Elite, sent to me by MAM. Probably the
easiest would be if you could give me a fax number. I didn't buy the whole
thing, but picked those items I needed. While you may well have some parts
left over, the kit is far from complete. You've probably noticed that, as
you progress through the building, the quality of the instructions goes
downhill. Well, when you get ahead of the firewall, the downhill path
continues! Of couse, there are so many permutaions ahead of the firewall
that I guess that is to be expected.
In my Elite, I put in an Aerosport Power O360, Airwolf filter, Vans baffles,
a Vans carb air box, Vans bracket to support the cables going to the carb,
Vans spinner and Pasma 2 ignition on the right side, so if you want some
comments on any of these, drop me a line.
Regards, Al
----- Original Message -----
From: "Jones, Michael" <MJones@HATCH.CA>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Friday, March 18, 2005 7:44 AM
Subject: firewall forward info
tohi all
does anyone out there have parts list for an 0-320 murphy firewall forward
kit, the one i have says 0-235 on it and needless to say as i compared it
the 0-320 install manual the parts listed dont all match, i might also add
the prices murphy charges for this kit are insane, the major items such as
lord mounts are at least double in us dollars the spruce price
thanx
mike
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
