landing lights

Ryan Mowat · Post by **Ryan Mowat** » Sat Feb 18, 2012 10:16 am

New tip lights (for new drooping tips) fit great and cost is reasonable.
Just installed the first one.

Ryan Mowat, P.Eng.
30528 1A Greatnorthern Ave
Abbotsford, BC V2T 6H4
(604) 556-7222 (ext 307), (604) 556-7215 (Fax)

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, March 09, 2005 11:50 AM
To: rebel-builders@dcsol.com
Subject: Re: Landing lights

Murphy has kits for both the leading edge and the tip lights. I'm told,
unfortunately, that the droop tip lights are considerably more expensive
than the old style standard tip light kit. This is mainly due to the mfg
having to produce new tooling for the considerably different lens. The
leading edge double light kits are now manufactured in house at MAM.
Trevor
Y. used to put them together for MAM, but due to his job requirements
etc he
has had to stop production. The only difference between the kit Trevor
was
making and MAM's is the lens. MAM says they would have had to
significantly
increase the price of the kit in order to cover their cost to have the
lens
manufactured for them. Instead they have gone to a slightly lighter
gauge of
lexan and the lens is now just wrapped around the leading edge. It's
definitely acceptable and in the long run replacement in the field no
longer
requires ordering a manufactured part from MAM, just head down to the
nearest plastic shop / Home Depot and pick up a square foot of Lexan.

Of course there is nothing stopping anyone from making their own tip
lights.
I've done plenty of them using both rectangular and round halogen
lights.

Wayne

----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, March 09, 2005 7:38 AM
Subject: RE: Landing lights

mike

man landing light kits are great, made by fellow not far from me in
burlington ontatio, will save you many house of work, comes with lexan

bent

to shape as well

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Tuesday, March 08, 2005 9:11 PM
To: rebel-builders@dcsol.com
Subject: Landing lights

I see some of the group out there is using the wing mounted landing
lights from MAM. Are these light kits the way to go? Are you happy

with

the results? Also which wing bay are you putting them in. I plan on
doing both wings.
Thanks,
Mike Betti
771E

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Dale Fultz · Post by **Dale Fultz** » Sat Feb 18, 2012 10:16 am

Hi Ryan, What kind of price are they getting for the landing lights for the
droop tips??? Thanks Dale
----- Original Message -----
From: "Ryan Mowat" <RMowat@forge-industrial.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, March 09, 2005 3:47 PM
Subject: RE: Landing lights

New tip lights (for new drooping tips) fit great and cost is reasonable.
Just installed the first one.

Ryan Mowat, P.Eng.
30528 1A Greatnorthern Ave
Abbotsford, BC V2T 6H4
(604) 556-7222 (ext 307), (604) 556-7215 (Fax)

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, March 09, 2005 11:50 AM
To: rebel-builders@dcsol.com
Subject: Re: Landing lights

Murphy has kits for both the leading edge and the tip lights. I'm told,
unfortunately, that the droop tip lights are considerably more expensive
than the old style standard tip light kit. This is mainly due to the mfg
having to produce new tooling for the considerably different lens. The
leading edge double light kits are now manufactured in house at MAM.
Trevor
Y. used to put them together for MAM, but due to his job requirements
etc he
has had to stop production. The only difference between the kit Trevor
was
making and MAM's is the lens. MAM says they would have had to
significantly
increase the price of the kit in order to cover their cost to have the
lens
manufactured for them. Instead they have gone to a slightly lighter
gauge of
lexan and the lens is now just wrapped around the leading edge. It's
definitely acceptable and in the long run replacement in the field no
longer
requires ordering a manufactured part from MAM, just head down to the
nearest plastic shop / Home Depot and pick up a square foot of Lexan.

Of course there is nothing stopping anyone from making their own tip
lights.
I've done plenty of them using both rectangular and round halogen
lights.

Wayne

----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, March 09, 2005 7:38 AM
Subject: RE: Landing lights

mike

man landing light kits are great, made by fellow not far from me in
burlington ontatio, will save you many house of work, comes with lexan
bent
to shape as well

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Tuesday, March 08, 2005 9:11 PM
To: rebel-builders@dcsol.com
Subject: Landing lights

I see some of the group out there is using the wing mounted landing
lights from MAM. Are these light kits the way to go? Are you happy
with
the results? Also which wing bay are you putting them in. I plan on
doing both wings.
Thanks,
Mike Betti
771E

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.1 - Release Date: 3/9/05

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Ryan Mowat · Post by **Ryan Mowat** » Sat Feb 18, 2012 10:16 am

Dale,

Call me at 604 897 4101, Ryan

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Dale Fultz
Sent: Thursday, March 10, 2005 3:24 PM
To: rebel-builders@dcsol.com
Subject: Re: Landing lights

Hi Ryan, What kind of price are they getting for the landing lights for
the
droop tips??? Thanks Dale
----- Original Message -----
From: "Ryan Mowat" <RMowat@forge-industrial.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, March 09, 2005 3:47 PM
Subject: RE: Landing lights

New tip lights (for new drooping tips) fit great and cost is

reasonable.

Just installed the first one.

Ryan Mowat, P.Eng.
30528 1A Greatnorthern Ave
Abbotsford, BC V2T 6H4
(604) 556-7222 (ext 307), (604) 556-7215 (Fax)

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, March 09, 2005 11:50 AM
To: rebel-builders@dcsol.com
Subject: Re: Landing lights

Murphy has kits for both the leading edge and the tip lights. I'm

told,

unfortunately, that the droop tip lights are considerably more

expensive

than the old style standard tip light kit. This is mainly due to the

mfg

having to produce new tooling for the considerably different lens. The
leading edge double light kits are now manufactured in house at MAM.
Trevor
Y. used to put them together for MAM, but due to his job requirements
etc he
has had to stop production. The only difference between the kit Trevor
was
making and MAM's is the lens. MAM says they would have had to
significantly
increase the price of the kit in order to cover their cost to have the
lens
manufactured for them. Instead they have gone to a slightly lighter
gauge of
lexan and the lens is now just wrapped around the leading edge. It's
definitely acceptable and in the long run replacement in the field no
longer
requires ordering a manufactured part from MAM, just head down to the
nearest plastic shop / Home Depot and pick up a square foot of Lexan.

Of course there is nothing stopping anyone from making their own tip
lights.
I've done plenty of them using both rectangular and round halogen
lights.

Wayne

----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, March 09, 2005 7:38 AM
Subject: RE: Landing lights

mike

man landing light kits are great, made by fellow not far from me in
burlington ontatio, will save you many house of work, comes with

lexan

bent
to shape as well

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Mike Betti
Sent: Tuesday, March 08, 2005 9:11 PM
To: rebel-builders@dcsol.com
Subject: Landing lights

I see some of the group out there is using the wing mounted landing
lights from MAM. Are these light kits the way to go? Are you happy
with
the results? Also which wing bay are you putting them in. I plan on
doing both wings.
Thanks,
Mike Betti
771E

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended

recipient

of this message you are hereby notified that you must not

disseminate,

copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.1 - Release Date: 3/9/05

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Ralph Baker · Post by **Ralph Baker** » Sat Feb 18, 2012 10:17 am

Mike,
We put a set of lights in each wing. The quality is high and the
instructions good. They can be installed after wing assembly. Our
decision to go with two sets is so a light would be instantly available
on approach to a "one way" strip if burnout occured and, more
importantly, a wig-wag was added for easier recognition on approach to
landing. Our CAP planes have this and they really stand out.
Ralph Baker

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Mike Betti · Post by **Mike Betti** » Sat Feb 18, 2012 10:17 am

Thanks,
I ordered 2 sets from MAM last week, I think they will work out. The tip
lights would be nice but too spendy for me.
----- Original Message -----
From: "Ralph Baker" <rebaker@ftc-i.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, March 13, 2005 12:11 PM
Subject: landing lights

Mike,
We put a set of lights in each wing. The quality is high and the
instructions good. They can be installed after wing assembly. Our
decision to go with two sets is so a light would be instantly available
on approach to a "one way" strip if burnout occured and, more
importantly, a wig-wag was added for easier recognition on approach to
landing. Our CAP planes have this and they really stand out.
Ralph Baker

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea · Post by **Wayne G. O'Shea** » Sat Feb 18, 2012 10:17 am

I keep saying...less than $50 and a few hours labour to do tip lights
yourself ...with aftermarket Hologens in either round or rectangular shape.
You gotta do a bunch of glass work after slicing and dicing MAM's standard
tips a anyhow to get them to fit right.

Wayne

----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, March 13, 2005 6:43 PM
Subject: Re: landing lights

Thanks,
I ordered 2 sets from MAM last week, I think they will work out. The tip
lights would be nice but too spendy for me.
----- Original Message -----
From: "Ralph Baker" <rebaker@ftc-i.net>
To: <rebel-builders@dcsol.com>
Sent: Sunday, March 13, 2005 12:11 PM
Subject: landing lights

Mike,
We put a set of lights in each wing. The quality is high and the
instructions good. They can be installed after wing assembly. Our
decision to go with two sets is so a light would be instantly available
on approach to a "one way" strip if burnout occured and, more
importantly, a wig-wag was added for easier recognition on approach to
landing. Our CAP planes have this and they really stand out.
Ralph Baker

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Dave Fife · Post by **Dave Fife** » Sat Feb 18, 2012 10:17 am

Well, I have been following this thread regarding landing light for a while. As some of you know I sell a 3" Halogen light, round, glass lens, 55w halogen H3 bulb. Comes with plastic housing and mounting bracket. They mount to the last rib on the wing and you make a lens in the leading edge of the wingtip. Cost you ask, 15.00 us + shipping. Just thought I would let you know.
BTW, for less than 50$ you can have lights......Wayne is correct......

David K. Fife
3D Composite Aircraft Parts Inc.
1345 Merkle St.
Ortonville, MI. 48462
Phone 248-627-4367
Long EZ in progress.
www.stormpages.com/3dcomposite/wingtip.html

---------------------------------
Do you Yahoo!?
Make Yahoo! your home page

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea · Post by **Wayne G. O'Shea** » Sat Feb 18, 2012 10:17 am

Dave...if you'd quit reading and start posting more often you could actually
sell those things too!!

))

Wayne

----- Original Message -----
From: "Dave Fife" <aircrafttips@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, March 15, 2005 8:11 PM
Subject: Re: landing lights

Well, I have been following this thread regarding landing light for a

while. As some of you know I sell a 3" Halogen light, round, glass lens,
55w halogen H3 bulb. Comes with plastic housing and mounting bracket. They
mount to the last rib on the wing and you make a lens in the leading edge of
the wingtip. Cost you ask, 15.00 us + shipping. Just thought I would let
you know.

BTW, for less than 50$ you can have lights......Wayne is correct......

David K. Fife
3D Composite Aircraft Parts Inc.
1345 Merkle St.
Ortonville, MI. 48462
Phone 248-627-4367
Long EZ in progress.
www.stormpages.com/3dcomposite/wingtip.html

---------------------------------
Do you Yahoo!?
Make Yahoo! your home page

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Dave Fife · Post by **Dave Fife** » Sat Feb 18, 2012 10:17 am

Well, Here I go again. I have not been posting because I am making the home ready for sale. I (we) have had it with the cold. Moving to Florida, Mid July this year. I have kept it quiet as I cannot work in the shop as often as I need to.
It takes a lot of time to do a move like this. Just waiting for my wifes contract to be approved. If all else fails I will just move 70 miles north to Bay City .
Yes I will still make parts and will resume ASAP. I have a few orders to fill and that is keeping me very busy too. I am contiuning to work on addl molds for the Rebel, Elite, Moose and now for the Long EZ's.
Lots to do, so little time.

Wayne, hows the ice fishing? I may have to come back next winter and give it a try up there.
It sounds like you have been doing some ski flying. Lots of fun.

Dave

"Wayne G. O'Shea" <oifa@irishfield.on.ca> wrote:
Dave...if you'd quit reading and start posting more often you could actually
sell those things too!!

))

Wayne

----- Original Message -----
From: "Dave Fife"
To:
Sent: Tuesday, March 15, 2005 8:11 PM
Subject: Re: landing lights

Well, I have been following this thread regarding landing light for a

while. As some of you know I sell a 3" Halogen light, round, glass lens,
55w halogen H3 bulb. Comes with plastic housing and mounting bracket. They
mount to the last rib on the wing and you make a lens in the leading edge of
the wingtip. Cost you ask, 15.00 us + shipping. Just thought I would let
you know.

BTW, for less than 50$ you can have lights......Wayne is correct......

David K. Fife
3D Composite Aircraft Parts Inc.
1345 Merkle St.
Ortonville, MI. 48462
Phone 248-627-4367
Long EZ in progress.
www.stormpages.com/3dcomposite/wingtip.html

---------------------------------
Do you Yahoo!?
Make Yahoo! your home page

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

---------------------------------
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne G. O'Shea · Post by **Wayne G. O'Shea** » Sat Feb 18, 2012 10:17 am

Good luck with your move Dave!

As for ice fishing...never much saw they joy in sitting on the ice staring
down a hole...but maybe I should give it a try one of these years! Been slow
from what I understand, but some really nice big fish for the odd lucky
sole. Here's the best I've seen this year.....
http://www.fishingthunderbay.com/laketrout2005.htm

Wayne

----- Original Message -----
From: "Dave Fife" <aircrafttips@yahoo.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, March 15, 2005 10:13 PM
Subject: Re: landing lights

Well, Here I go again. I have not been posting because I am making the

home ready for sale. I (we) have had it with the cold. Moving to Florida,
Mid July this year. I have kept it quiet as I cannot work in the shop as
often as I need to.

It takes a lot of time to do a move like this. Just waiting for my wifes

contract to be approved. If all else fails I will just move 70 miles north
to Bay City .

Yes I will still make parts and will resume ASAP. I have a few orders to

fill and that is keeping me very busy too. I am contiuning to work on addl
molds for the Rebel, Elite, Moose and now for the Long EZ's.

Lots to do, so little time.

Wayne, hows the ice fishing? I may have to come back next winter and

give it a try up there.

It sounds like you have been doing some ski flying. Lots of fun.

Dave

"Wayne G. O'Shea" <oifa@irishfield.on.ca> wrote:
Dave...if you'd quit reading and start posting more often you could

actually

sell those things too!! ))

Wayne

----- Original Message -----
From: "Dave Fife"
To:
Sent: Tuesday, March 15, 2005 8:11 PM
Subject: Re: landing lights

Well, I have been following this thread regarding landing light for a
while. As some of you know I sell a 3" Halogen light, round, glass lens,
55w halogen H3 bulb. Comes with plastic housing and mounting bracket. They
mount to the last rib on the wing and you make a lens in the leading edge

of

the wingtip. Cost you ask, 15.00 us + shipping. Just thought I would let
you know.
BTW, for less than 50$ you can have lights......Wayne is correct......

David K. Fife
3D Composite Aircraft Parts Inc.
1345 Merkle St.
Ortonville, MI. 48462
Phone 248-627-4367
Long EZ in progress.
www.stormpages.com/3dcomposite/wingtip.html

---------------------------------
Do you Yahoo!?
Make Yahoo! your home page

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

---------------------------------
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------